Carboxylic acids hydrocarbons

Ezquerro, Pons, Tena [22-25,27] Multi-layer packaging thermo-oxidation during extrusion coating process Ketones, aldehydes, carboxylic acids, hydrocarbons CAR-PDMS... 

These compounds include esters, alcohols and acids and are the class of additives used to improve oiliness and reduce friction. The carboxylic acids can function by forming metal soaps with the contacting surfaces. In this case there is evidence that the upper limit for friction reduction coincides with the melting point of the metal soap [10], There is also evidence that control of chain length, chain matching of the carboxylic acid hydrocarbon backbone and choice of solvent hydrocarbon can minimise friction [10], Figure 3.10 shows the influence of hydrocarbon backbone on friction of both carboxylic acids and alcohols. 

Kolbe reaction The pre >aration of saturated or unsaturated hydrocarbons by the electrolysis of solutions of the alkali salts of aliphatic carboxylic acids. Thus, ethanoic acid gives ethane,... 

A selection of important anionic surfactants is displayed in table C2.3.1. Carboxylic acid salts or tire soaps are tire best known anionic surfactants. These materials were originally derived from animal fats by saponification. The ionized carboxyl group provides tire anionic charge. Examples witlr hydrocarbon chains of fewer tlran ten carbon atoms are too soluble and tliose witlr chains longer tlran 20 carbon atoms are too insoluble to be useful in aqueous applications. They may be prepared witlr cations otlrer tlran sodium. 

Nitroamlines. Acetyl derivatives (p. 388), Benzoyl derivatives (p. 388). Diamines. Diacet> l derivatives (p. 388), Dibenzoyl derivatives (p. 388). Halogeno-hydrocarbons, a-Naphthyl ethers (from reactive halogen compounds, p. 391, and their Picratcs, p. 394), Nitro-derivatives (p.39i). Carboxylic acid (if oxidisable side chain) (p. 393). 

A further example is given below illustrating the use of a dibasic anhydride (succinic anhydride) the succinoylation reaction is a valuable one since it leads to aroyl carboxylic acids and ultimately to polynuclear hydrocarbons. This general scheme of synthesis of substituted hydrocarbons through the use of succinic anhydride is sometimes called the Haworth reaction. Thus a-tetralone (see below) may be reduced by the Clemmensen method to tetralin (tetrahydronaphthalene) and the latter converted into naphthalene either catal3d.ically or by means of sulphur or selenium (compare Section, VI,33). 

Electrolysis, under similar conditions, of a mixture of two carboxylic acids RCOOH and R COOH leads, in addition to normal coupling products R—R and R —R, to cross coupling R—R. If a mixture of a saturated carboxylic acid and a half ester of an ato-dicarboxylic acid is electrolysed, there are three main products, viz., a hydrocarbon (I), a mono-ester (II), and a di-ester (HI) and these are readily separable by distillation. Some unsaturated ester (IV) is often present in small quantity. 

The formation of micelles and their properties are responsible for the cleansing action of soaps Water that contains sodium stearate removes grease by enclosing it m the hydrocarbon like interior of the micelles The grease is washed away with the water not because it dissolves m the water but because it dissolves m the micelles that are dis persed m the water Sodium stearate is an example of a soap sodium and potassium salts of other C12-C1S unbranched carboxylic acids possess similar properties... 

FIGURE 19 6 Space filling model of a micelle formed by association of car boxylate ions derived from a long chain carboxylic acid The hydrocarbon chains tend to be on the inside and the carboxylate ions on the surface where they are in contact with water mole cules and metal cations... 

Substitutive lUPAC names for nitriles add the suffix nitrile fo fhe name of fhe parenf hydrocarbon chain fhaf includes fhe carbon of fhe cyano group Nifriles may also be named by replacing the ic acid or oic acid ending of the corresponding carboxylic acid with omtrile Alternatively they are sometimes given functional class lUPAC names as alkyl cyanides... 

Many esters occur naturally Those of low molecular weight are fairly volatile and many have pleasing odors Esters often form a significant fraction of the fragrant oil of fruits and flowers The aroma of oranges for example contains 30 different esters along with 10 carboxylic acids 34 alcohols 34 aldehydes and ketones and 36 hydrocarbons... 

Typical nonsieve, polar adsorbents are siUca gel and activated alumina. Kquilihrium data have been pubUshed on many systems (11—16,46,47). The order of affinity for various chemical species is saturated hydrocarbons < aromatic hydrocarbons = halogenated hydrocarbons < ethers = esters = ketones < amines = alcohols < carboxylic acids. In general, the selectivities are parallel to those obtained by the use of selective polar solvents in hydrocarbon systems, even the magnitudes are similar. Consequendy, the commercial use of these adsorbents must compete with solvent-extraction techniques. 

The common method of naming aldehydes corresponds very closely to that of the related acids (see Carboxylic acids), in that the term aldehyde is added to the base name of the acid. For example, formaldehyde (qv) comes from formic acid, acetaldehyde (qv) from acetic acid, and butyraldehyde (qv) from butyric acid. If the compound contains more than two aldehyde groups, or is cycHc, the name is formed using carbaldehyde to indicate the functionaUty. The lUPAC system of aldehyde nomenclature drops the final e from the name of the parent acycHc hydrocarbon and adds al If two aldehyde functional groups are present, the suffix -dialis used. The prefix formjlis used with polyfunctional compounds. Examples of nomenclature types are shown in Table 1. 

Interest in synthetic naphthenic acid has grown as the supply of natural product has fluctuated. Oxidation of naphthene-based hydrocarbons has been studied extensively (35—37), but no commercially viable processes are known. Extensive purification schemes must be employed to maximize naphthene content in the feedstock and remove hydroxy acids and nonacidic by-products from the oxidation product. Free-radical addition of carboxylic acids to olefins (38,39) and addition of unsaturated fatty acids to cycloparaffins (40) have also been studied but have not been commercialized. 

Trees, especially conifers, contain tall oils. Tall oil is not isolated dkecfly tall oil fatty acids are isolated from the soaps generated as a by-product of the sulfate pulping process for making paper. Refined tall oil fatty acids are obtained by acidification of the soaps, followed by fractional distillation to separate the fatty acids from the rosin acids and terpene hydrocarbons that also are present in the cmde tall oil fatty acids (see Carboxylic acids Fatty ACIDS FROMTALL OIL). 

The present method for preparing aromatic dicarboxylic acids has been used to convert phthalic or isophthalic acid to tereph-thalic acid (90-95%) 2,2 -biphenyldicarboxylic acid to 4,4 -biphenyldicarboxylic acid 3,4-pyrroledicarboxylic acid to 2,5-pyr-roledicarboxylic acid and 2,3-pyridinedicarboxylic acid to 2,5-pyridinedicarboxylic acid. A closely related method for preparing aromatic dicarboxylic acids is the thermal disproportionation of the potassium salt of an aromatic monocarboxylic acid to an equimolar mixture of the corresponding aromatic hydrocarbon and the dipotassium salt of an aromatic dicarboxylic acid. The disproportionation method has been used to convert benzoic acid to terephthalic acid (90-95%) pyridine-carboxylic acids to 2,5-pyridinedicarboxylic acid (30-50%) 2-furoic acid to 2,5-furandicarboxylic acid 2-thiophenecar-boxylic acid to 2,5-thiophenedicarboxylic acid and 2-quinoline-carboxylic acid to 2,4-quinolinedicarboxylic acid. One or the other of these two methods is often the best way to make otherwise inaccessible aromatic dicarboxylic acids. The two methods were recently reviewed. ... 

Another example of the effect of resonance is in the relative acidity of carboxylic acids as compared to alcohols. Carboxylic acids derived from saturated hydrocarbons have ipK values near 5, whereas saturated alcohols have pA values in the range 16-18. This implies that the carboxylate anion can accept negative charge more readily than an oxygen on a saturated carbon chain. This can be explained in terms of stabilization of the negative charge by resonance, ... 

In the discussion of the relative acidity of carboxylic acids in Chapter 1, the thermodynamic acidity, expressed as the acid dissociation constant, was taken as the measure of acidity. It is straightforward to determine dissociation constants of such adds in aqueous solution by measurement of the titration curve with a pH-sensitive electrode (pH meter). Determination of the acidity of carbon acids is more difficult. Because most are very weak acids, very strong bases are required to cause deprotonation. Water and alcohols are far more acidic than most hydrocarbons and are unsuitable solvents for generation of hydrocarbon anions. Any strong base will deprotonate the solvent rather than the hydrocarbon. For synthetic purposes, aprotic solvents such as ether, tetrahydrofuran (THF), and dimethoxyethane (DME) are used, but for equilibrium measurements solvents that promote dissociation of ion pairs and ion clusters are preferred. Weakly acidic solvents such as DMSO and cyclohexylamine are used in the preparation of strongly basic carbanions. The high polarity and cation-solvating ability of DMSO facilitate dissociation... 

Carbon, hydrogen and possibly oxygen Resin and derivatives Natural drying oils Cellulose derivatives Alkyd resins Epoxy resins (uncured) Phenol-formaldehyde resins Polystyrene Acrylic resins Natural and synthetic rubbers Carbon monoxide Aldehydes (particularly formaldehyde, acrolein and unsaturated aldehydes) Carboxylic acids Phenols Unsaturated hydrocarbons Monomers, e.g. from polystyrene and acrylic resins... 

Man-made mineral fibre Mixed hydrocarbons (C3 to CIO) m air Total hexavalent chromium compounds in air Aromatic carboxylic acid anhydndes m air... 

Bromophenol blue (3.0...4.6) aliphatic carboxylic acids [225 — 228] malonic and lactic acids [229] palmitic and lactic acids [230] malonic, glycolic, malic, citric, tartaric, ketoglutaric, galacturonic and oxalic acids [196] dicarboxylic acids, succinic acid [231] indoleacetic acid, trichloroacetic acid [232] palmitic acid, palmityl- and stearyllactic acid [223] benzoic, sorbic and salicylic acid [234] metabolites of ascorbic acid [235] chloropropionic acid [236] oligogalacturonic acids [237] amino acids, hydrocarbons, mono-, di- and triglycerides [238] xylobiose, xylose, glucose and derivatives [239] sugar alcohols [91] toxaphene [240]... 

Participation of fluorocarbocations, derived from carboxylic acids and from halo acetones, in reactions of carbonyl compounds with sulfur tetrafluoride has been directly evidenced by trapping them with aromatic hydrocarbons [207, 20S],... 

Peroxytnfluoroacetic acid is used tor numerous oxidations of saturated hydrocarbons and aromatic compounds It oxidizes alkanes, alkanols, and carboxylic acids with formation of hydroxylation products [29] Oxidation of cyclohexane with peroxytnfluoroacetic acid proceeds at room temperature and leads to cyclohexyl trifluoroacetate in 75% yield, 1-octanol under similar conditions gives a mixture of isomeric octanediols in 59% yield, and palmitic acid gives a mixture of hydroxypalmitic acids in 70% yield [29]... 

---