Refined tall oil

Table 5. Typical Properties of Refined Tall Oil Fatty Acids...

The principal constituents of rosin (qv) are abietic and related acids. Tall oil (qv) is a mixture of unsaturated fatty and aHcycHc acids of the abietic family. Refined tall oil may be high in rosin acids or unsaturated acids, depending on the refining process. Ethoxylates of rosin acids, eg, dehydro abietic acid, are similar to fatty acid ethoxylates in surfactant properties and manufacture, except for thek stabiHty to hydrolysis. No noticeable decomposition is observed when a rosin ester of this type is boiled for 15 min in 10% sulfuric acid or 25% sodium hydroxide (90). Steric hindrance of the carboxylate group associated with the aHcycHc moiety has been suggested as the cause of this unexpectedly great hydrolytic stabiHty. 

Trees, especially conifers, contain tall oils. Tall oil is not isolated dkecfly tall oil fatty acids are isolated from the soaps generated as a by-product of the sulfate pulping process for making paper. Refined tall oil fatty acids are obtained by acidification of the soaps, followed by fractional distillation to separate the fatty acids from the rosin acids and terpene hydrocarbons that also are present in the cmde tall oil fatty acids (see Carboxylic acids Fatty ACIDS FROMTALL OIL). 

Definition Cobalt deriv. of refined tall oil. of varying composition Precaution Combustible... 

Tall oil tal, oi(9)l [part trans. of Gr Talldl, part trans. Swedish tallolja, fr. tall pine + olja oil] n. A generic name for a number of products from the manufacture of wood pulp by the alkah process sulfate or kraft process. To provide some distinction between the various products, designations are often applied in accordance with the process or composition, some of which are cmde tall oil, acid refined tall oil, distilled tall oil, tall oil fatty acids, and tall oil rosin. The following designations for tall oil shall be considered obsolete crude resinous hquid, finn oil, liquid resin, liquid rosin, resin oil, sulfate pitch, sulfate resin, sulfate rosin, Swedish pine oil, Swedish resin, Swedish rosin, Swedish rosin oil, Sylvie oil, talloel, tallol, Swedish oil, fluid resin, and Swedish olein. 

Acetone is used to extract fats, oils, waxes, and resins from natural products, to dewax lubricating oils, and to extract certain essential oils. The pharmaceutical industry uses acetone to extract B-vitamin complexes, alkaloids, antibiotics and enzymes. Methyl ethyl ketone is used to dewax lube oil. Methyl isobutyl ketone is used to dewax mineral oil, refine tall oil, and in extractive distillation and separation of isopropyl alcohol from ethyl and butyl alcohols. The extraction and purification of antibiotics and other pharmaceutical products utilize MIBK. Methyl isobutyl ketone is used in the extraction of rosin from pine wood and the extraction of heavy metal ion complexes from water solutions. 

Separation of Fatty Acids. Tall oil is a by-product of the pulp and paper manufacturiag process and contains a spectmm of fatty acids, such as palmitic, stearic, oleic, and linoleic acids, and rosia acids, such as abietic acid. The conventional refining process to recover these fatty acids iavolves iatensive distillation under vacuum. This process does not yield high purity fatty acids, and moreover, a significant degradation of fatty acids occurs because of the high process temperatures. These fatty and rosia acids can be separated usiag a UOP Sorbex process (93—99) (Tables 8 and 9). 

Siace the mid 1950s, tall oil fatty acids (TOFA) have become available ia good quaUties and large quantities (see Carboxylic acids, fatty acids from TALL oil). Refined grades of TOFA have degrees of unsaturation rivaling that of soya acids. Siace it is a year-rouad by-product from the paper iadustry, its... 

In the initial black Hquor concentration, saponified fatty and resin acid salts separate as tall oil soaps (see Tall oil). These soaps can be skimmed from the aqueous spent Hquor, acidified, and refined to give a cmde tall oil composed of resin acids, chiefly abietic and neoabietic fatty acids, chiefly oleic and Hnoleic and an unsaponifiable fraction made of phytosterols, alcohols, and hydrocarbons. Tall oil is fractionated primarily into fatty acids (see... 

Tall oil rosin is a by-product of paper manufacturing. Raw wood chips are digested under heat and pressure with a mixture of sodium hydroxide and sodium sulfide. Soluble sodium salts of lignin, rosin, and fatty acids are formed, which are removed from the wood pulp as a dark solution. The soaps of the rosin and fatty acids float to the top of the mixture, where they are skimmed off and treated with sulfuric acid to free the rosin and fatty acids. This mixture, known as cmde tall oil (CTO), is refined further to remove color and odor bodies fractional distillation separates the tall oil rosin acids from the fatty acids (see Tall oil). 

Tall oil [8002-26-4] has been referred to as the largest and fastest growing source of extractives such as turpentine and resin. It can be refined to give tall oil fatty acids (see Carboxylic acids) and tall oil pitch as well as resins. These fatty acids compete with fatty acids from vegetable sources for many of the same industrial markets. 

A rather impressive Hst of materials and products are made from renewable resources. For example, per capita consumption of wood is twice that of all metals combined. The ceUulosic fibers, rayon and cellulose acetate, are among the oldest and stiU relatively popular textile fibers and plastics. Soy and other oilseeds, including the cereals, are refined into important commodities such as starch, protein, oil, and their derivatives. The naval stores, turpentine, pine oil, and resin, are stiU important although their sources are changing from the traditional gum and pine stumps to tall oil recovered from pulping. 

Nemerow [23] summarized the major characteristics of wastes from phosphate and phosphorus compounds production (i.e., clays, slimes and tall oils, low pH, high suspended solids, phosphorus, silica, and fluoride) and suggested the major treatment and disposal methods such as lagooning, mechanical clarification, coagulation, and settling of refined wastewaters. The... 

Solvent extraction has found application for many years in the coal tar industry. Extraction of phenols from coal-tar distillates by washing with caustic soda solution can be considered such a process. In the isomer separation, a process for separation of m- and p-crcsol by dissociation extraction has been reported. Work is in progress in several parts of the world to use solvent extraction for the direct manufacture of chemicals from coal. Crude tall oil is a byproduct of pulp mills. It is refined by solvent extraction using propane or furfural. 

---