Reactivity in halogenation

Kilpatrick and Luborsky (1953), of. Table 11. Relative values of reactivity in halogenation Condon (1948), cf. Table 10. 

Italian authors found the following order of decreasing reactivity in halogenation and acylation a-position in thiophene > S-position in benzo[Zi]thiophene > a-position in benzo[6]thiophene > -position in thiophene. 

In electrophilic substitution, the chief problem encountered with aromatic amines is that they are too reactive. In halogenation, substitution tends to occur at every available ortho or para position. For example ... 

The high reactivity in halogenation is apparently due to the pyrrole-like NH in l,2,3-triazole, because 2-methyl-l,2,3-ttiazole reacts much more slowly. 

Regarding the substituent effect on reactivity of groups in positions 4 and 5 there is little information in the literature. The reactivity of halogen in position 5 seems to be increased when an amino group is present in position 2. Substitution products are easily obtained using neutral nucleophiles such as thiourea, thiophenols, and mercaptans (52-59). 

The halogen fluorides are best prepared by the reaction of fluorine with the corresponding halogen. These compounds are powerful oxidising agents chlorine trifluoride approaches the reactivity of fluorine. In descending order of reactivity the halogen fluorides are chlorine pentafluoride [13637-63-3] 1 5 chlorine trifluoride [7790-91-2] 3 bromine pentafluoride [7789-30-2], BrF iodine heptafluoride [16921 -96-3], chlorine... 

Potassium fluoride [7789-23-3], KF, is the most frequently used of the alkaU metal fluorides, although reactivity of the alkaU fluorides is in the order CsF > RbF > KF > NaF > LiF (6). The preference for KF is based on cost and availabiUty traded off against relative reactivity. In its anhydrous form it can be used to convert alkyl haUdes and sulfonyl haUdes to the fluorides. The versatility makes it suitable for halogen exchange in various functional organic compounds like alcohols, acids and esters (7). For example, 2,2-difluoroethanol [359-13-7] can be made as shown in equation 9 and methyl difluoroacetate [433-53 ] as in equation 10. 

Sulfonate Esters. Sucrose sulfonates are valuable intermediates for the synthesis of epoxides and derivatives containing halogens, nitrogen, and sulfur. In addition, the sulfonation reaction has been used to determine the relative reactivity of the hydroxyl groups in sucrose. The general order of reactivity in sucrose toward the esterification reaction is OH-6 OH-6 > OH-1 > HO-2. 

The reactivity of halogens in pyridazine N- oxides towards nucleophilic substitution is in the order 5 > 3 > 6 > 4. This is supported by kinetic studies of the reaction between the corresponding chloropyridazine 1-oxides and piperidine. In general, the chlorine atoms in pyridazine A-oxides undergo replacement with alkoxy, aryloxy, piperidino, hydrazino, azido, hydroxylamino, mercapto, alkylmercapto, methylsulfonyl and other groups. 

Vinyl and phenyl mfluoromethyl groups are reactive in the presence of aluminum chloride [10] Replacement of fluorine by chlorine often occurs Polyfluori-nated trifluoromethylbenzenes form reactive a,a-difluorobenzyl cations in antimony pentafluoride [11] 1 Phenylperfluoropropene cyclizes in aluminum chloride to afford 1,1,3-trichloro 2 fluoroindene [10] (equation 10) The reaction IS hypothesized to proceed via an allylic carbocation, whose fluoride atoms undergo halogen exchange... 

Instead of the definition in Eq. (7-82), the selectivity is often written as log k,). Another way to consider a selectivity-reactivity relationship is to compare the relative effects of a series of substituents on a pair of reactions. This is what is done when Hammett plots are made for a pair of reactions and their p values are compared. The slope of an LEER is a function of the sensitivity of the process being correlated to structural or solvent changes. Thus, in a family of closely related LFERs, the one with the steepest slope is the most selective, and the one with the smallest slope is the least selective.Moreover, the intercept (or some arbitrarily selected abscissa value, usually log fco for fhe reference substituent) should be a measure of reactivity in each reaction series. Thus, a correlation should exist between the slopes (selectivity) and intercepts (reactivity) of a family of related LFERs. It has been suggested that the slopes and intercepts should be linearly related, but the conditions required for linearity are seldom met, and it is instead common to find only a rough correlation, indicative of normal selectivity-reactivity behavior. The Br nsted slopes, p, for the halogenation of a series of carbonyl compounds catalyzed by carboxylate ions show a smooth but nonlinear correlation with log... 

Because of their reactivity, the halogens do not occur in the free elemental state but they are both widespread and abundant in the form of their ions, X. Iodine also occurs as iodate (see below). In addition to large halide mineral deposits, particularly of NaCl and KCl, there are vast quantities of chloride and bromide in ocean waters and brines. 

Two different sets of experimental conditions have been used. Buu-Hoi et al. and Hansen have employed the method introduced by Papa et using Raney nickel alloy directly for the desulfurization in an alkaline medium. Under these conditions most functional groups are removed and this method is most convenient for the preparation of aliphatic acids. The other method uses Raney nickel catalysts of different reactivity in various solvents such as aqueous ammonia, alcohol, ether, or acetone. The solvent and activity of the catalyst can have an appreciable influence on yields and types of compounds formed, but have not yet been investigated in detail. In acetic anhydride, for instance, desulfurization of thiophenes does not occur and these reaction conditions have been employed for reductive acetylation of nitrothiophenes. Even under the mildest conditions, all double bonds are hydrogenated and all halogens removed. Nitro and oxime groups are reduced to amines. 

The inferior activation in the 3- or 6eto-position is illustrated by the very large difference in reactivity in the following aminations and alkoxylations. In the reaction of 2-chloro-5-iodopyridine or 2,3-dibromopyridine (cf. 295) with boiling methanolic methoxide, only the 2-halogen is displaced as is also the case in the amination of 2-chloro-3,5-diiodopyridine and of 2,3,6-tribromopyridine. 4-Amination of 3,4-dibromo-, 2,3,4,5-tetrabromo-, and 3-bromo-4-chloro-pyridine occurred. Only 2-amination (aqueous NH3, 190°, 36 hr) occurred with 2,3-dichloropyridine (295) and only 4-ethoxyla-tion (alcoholic ethoxide, 160°, 4 hr) with 3,4-dichloropyridine. ... 

Chloroquinoline (401) reacts well with potassium fluoride in dimethylsulfone while its monocyclic analog 2-chloropyridine does not. Greater reactivity of derivatives of the bicyclic azine is evident also from the kinetic data (Table X, p. 336). 2-Chloroquinoline is alkoxylated by brief heating with methanolic methoxide or ethano-lic potassium hydroxide and is converted in very high yield into the thioether by trituration with thiocresol (20°, few hrs). It also reacts with active methylene carbanions (45-100% yield). The less reactive 3-halogen can be replaced under vigorous conditions (160°, aqueous ammonia-copper sulfate), as used for 3-bromoquino-line or its iV-oxide. 4-Chloroquinoline (406) is substituted by alcoholic hydrazine hydrate (80°, < 8 hr, 20% yield) and by methanolic methoxide (140°, < 3 hr, > 90% yield). This apparent reversal of the relative reactivity does not appear to be reliable in the face of the kinetic data (Tables X and XI, pp. 336 and 338) and the other qualitative comparisons presented here. 

Nitromethane has been used as a solvent for molecular bromination297. The bromination of polymethylbenzenes in nitromethane, acetic acid, and 1 1 mixtures of these solvents at 30 °C, showed that rates were much faster (about 330-fold) in nitromethane than in acetic acid. With nitromethane, in the bromine concentration range 0.01-0.02 M, the reaction was third-order in bromine. The relative deactivating effects of m-halogen substituents were measured in terms of the time taken for 10 % reaction to occur, and these values are given in Table 71 from which the relative reactivities in the different solvents are apparent the deactivating effects of the m-nitro substituent were obtained by comparison with the reactivity of chloromesitylene at different concentrations (0.035, 0.055 M) of reactants. The results for the nitro compounds were interpreted in the same way... 

Tetramethylguanidinium azide, an azide salt that is readily soluble in halogenated solvents, is a useful source of azide ions in the preparation of azides from reactive halides such as a-haloketones, a-haloamides, and glycosyl halides.74... 

---