Vinyl alcohol-methyl methacrylate copolymers

Several polymers were evaluated in the form of a surface coating on glass beads packed in columns to determine their ability to retain platelets when whole human blood passes over the surface. This ability was measured as the platelet retention index p, the fraction of platelets retained on the column. Lowest values of p were found for poly(ethylene oxide), polypropylene oxide), poly(tetramethylene oxide) (in the form of polyurethanes), and polydimethylsiloxane. Highest values (around 0.8) were found for cross-linked poly(vinyl alcohol) and the copolymers of ethylenediamine with diisocyanates. Intermediate values were found for polystyrene and its copolymers with methyl acrylate, for polyacrylate, and for poly(methyl methacrylate). The results are interpreted in terms of possible hydrophobic and hydrogen bonding interactions with plasma proteins. [Pg.41]

Non-ionic, anionic, and cationic VP copolymers are all available commercially to enhance the hydrophilic, hydro-phobic, and ionic properties of PVP for specific applications. Important comonomers include vinyl acetate (VA), acrylic acid (AA), vinyl alcohol, dimethylaminoethyl-methacrylate (DMAEMA), styrene, maleic anhydride, acrylamide, methyl methacrylate, lauryl methacrylate (LM), a-olefins, methacrylamidopropyltrimethyl ammonium chloride (MAPTAC), vinyl caprolactam (VCL), and dimethylaminopropylmethacrylamide (DMAPMA). [Pg.2408]

Some specific recent applications of the GC-MS technique to various types of polymers include the following PE [49,50], poly(l-octene) [51], poly(l-decene) [51], poly(l-dodecene) [51], 1-octene-l-decene-l-dodecene terpolymer [51], chlorinated polyethylene [52], polyolefins [53, 54], acrylic acid methacrylic acid copolymers [55], polyacrylates [56], styrene-butadiene and other rubbers [57-59], nitrile rubber [60], natural rubbers [61, 62], chlorinated natural rubber [63, 64], polychloroprene [65], PVC [66-68], silicones [69, 70], polycarbonates [71], styrene-isoprene copolymers [72], substituted PS [73], polypropylene carbonate [74], ethylene-vinyl acetate copolymers [75], Nylon [76], polyisopropenyl cyclohexane a-methyl styrene copolymers [77], m-cresol-novolac epoxy resins [78], polymeric flame retardants [79], poly(4-N-alkyl styrenes) [80], polyvinyl pyrrolidone [81], vinyl pyrrolidone-methyl acryloxysilicone copolymers [82], polybutylcyanoacrylate [83], polysulfide copolymers [84], poly(diethyl-2-methacryloxy)ethyl phosphate [85], ethane-carbon monoxide copolymers [86], polyetherimide [87], bisphenol A [88], ethyl styrene [89], styrene-isoprene block copolymer [89], polyvinyl alcohol-co-vinyl acetate [90], epoxide thiol [91], maleic acid-propylene copolymer [92], P-hydroxy butyrate-P-hydroxy valerate copolymer [93], polycaprolactams [39,94], PS [95,96], polypyrrole [95,96], polyhydroxy alkanoates [97], poly(p-chloromethyl) styrene [81], polybenzooxazines and siloxy substituted polyoxadisila-pentanylenes [98,99] poly benzyl methacrylates [100], polyolefin blends after ageing in soil [101] and polystyrene peroxide [43]. [Pg.150]

EVAL is a poly(vinyl alcohol), a copolymer of ethylene and vinyl alcohol. PMMA = poly(methyl methacrylate). [Pg.35]

Polyvinyl alcohol is a main ingredient in latex paints, hairsprays, shampoos, and glues. It forms polymers and copolymers with other monomers, such as vinyl acetate and methyl methacrylate... [Pg.236]

TiCU readily functionalizes hydrophilic polymers such as poly(vinyl alcohol), m-ciesol novolac and methacrylic acid copolymers as well as moderately hydrophobic polymers such as poly(methyl methacrylate), poly(vinyl acetate), poly(benzyl methacrylate) and fully acetylated m-cresol novolac. HCI4 did not react with poly(styrene) to form etch resistant films indicating that very hydrophobic films follow a different reaction pathway. RBS analysis revealed that Ti is present only on the surface of hydrophilic and moderately hydrophobic polymer films, whereas it was found diffused through the entire thickness of the poly(styrene) films. The reaction pathways of hydrophilic and hydrophobic polymers with HCI4 are different because TiCl is hydrolysed by the surface water at the hydrophilic polymer surfaces to form an etch resistant T1O2 layer. Lack of such surface water in hydrophobic polymers explains the absence of a surface TiC>2 layer and the poor etching selectivities. [Pg.208]

Uses Copolymerized with methyl acrylate, methyl methacrylate, vinyl acetate, vinyl chloride, or 1,1-dichloroethylene to produce acrylic and modacrylic fibers and high-strength fibers ABS (acrylonitrile-butadiene-styrene) and acrylonitrile-styrene copolymers nitrile rubber cyano-ethylation of cotton synthetic soil block (acrylonitrile polymerized in wood pulp) manufacture of adhesives organic synthesis grain fumigant pesticide monomer for a semi-conductive polymer that can be used similar to inorganic oxide catalysts in dehydrogenation of tert-butyl alcohol to isobutylene and water pharmaceuticals antioxidants dyes and surfactants. [Pg.81]

Graft copolymers of polyamides using pre-irradiation gamma-rays techniques have been reported for styrene (130), in solution, in the presence of water (40), in alcohols or acetone solution (131), vinyl acetate (130), methacrylic acid in water (132) or methanol solution (129), methyl (133) and ethyl (130) acrylates, 2-ethylhexyl acrylate (55,134), methyl methacrylate (130), in methanol solution (129), 2-dimethylamino ethyl methacrylate quaternary salts (135), acrylamide in aqueous medium (128,136), acrylonitrile (130,137), and 4-vinyl pyridine in aqueous solution (128). [Pg.104]

Copolymers of methacrylates with vinyl alcohol (Toyopearl, Fractogel) have, moreover, been successfully used as supports for the synthesis of peptides [229], oligonucleotides [230], and PNA [231]. Cross-linked poly(methyl methacrylates) [12,92,232] have also been investigated and used for solid-phase peptide synthesis. [Pg.33]

In fact, the copolymers of methacrylic acid with maleic anhydride (14) and the copolymers of vinyl alcohol with maleic anhydride (127) obtained respectively from optically active (l-methyl-benzyl)-methacrylate or (l-methyl-benzyl)-vinyl-ether and maleic anhydride, were optically active, but their rotatory power was rather small. [Pg.437]

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... [Pg.958]

In addition, borane-containing POs can be prepared by copolymerization of olefin with borane monomers or by hydroboration of polyolefins including unsaturated groups, such as olefin-divinylbenzene copolymer and olefin-diene copolymers. Many kinds of graft copolymers, such as poly-elhylene-gra/f-poly( vinyl alcohol), PE-g-PMMA, polypropylcnc-gra/f-poly-(maleicanhydride-co-styrene), polypropylene-gra/f-poly(methacrylic acid), polypropylene-gra/f-poly(vinyl alcohol), polypropylene-gra/f-polycaprolac-tone (PP-g-PCL), polypropylcnc-gra/f-poly(methyl methacrylate) (PP-g-PMMA), poly( ethylene-co-propylene)-gra/f-poly(methyl methacrylate) (EPR-g-PMMA), and poly(ethylene-co-propylene)-gra/f-poly(maleic anhydride-costyrene), have been synthesized by such a method resulting in controllable composition and molecular microstructures [63-66]. [Pg.93]

The interfacial properties of an amphiphilic block copolymer have also attracted much attention for potential functions as polymer compatibilizers, adhesives, colloid stabilizers, and so on. However, only a few studies have dealt with the monolayers o well - defined amphiphilic block copolymers formed at the air - water interface. Ikada et al. [124] have studied monolayers of poly(vinyl alcohol)- polystyrene graft and block copolymers at the air - water interface. Bringuier et al. [125] have studied a block copolymer of poly (methyl methacrylate) and poly (vinyl-4-pyridinium bromide) in order to demonstrate the charge effect on the surface monolayer- forming properties. Niwa et al. [126] and Yoshikawa et al. [127] have reported that the poly (styrene-co-oxyethylene) diblock copolymer forms a monolayer at the air - water... [Pg.194]

Aldol group transfer polymerization of ferf-butyldimethylsilyl vinyl ether [62] was initiated by pendant aldehyde functions incorporated along a poly(methyl methacrylate) (PMMA) backbone [63]. This backbone was a random copolymer prepared by group transfer polymerization of methyl methacrylate (MMA) and acetal protected 5-methacryloxy valeraldehyde. After deprotection of the aldehyde initiating group, polymerization proceeded by activation with zinc halide in THF at room temperature. The reaction led to a graft copolymer with PMMA backbone and poly(silyl vinyl ether) or, upon hydrolysis of the ferf-butyldimethylsilyl groups, poly(vinyl alcohol) branches. [Pg.43]

Most research into the study of dispersion polymerization involves common vinyl monomers such as styrene, (meth)acrylates, and their copolymers with stabilizers like polyvinylpyrrolidone (PVP) [33-40], poly(acrylic acid) (PAA) [18,41],poly(methacrylicacid) [42],or hydroxypropylcellulose (HPC) [43,44] in polar media (usually alcohols). However, dispersion polymerization is also used widely to prepare functional microspheres in different media [45, 46]. Some recent examples of these preparations include the (co-)polymerization of 2-hydroxyethyl methacrylate (HEMA) [47,48],4-vinylpyridine (4VP) [49], glycidyl methacrylate (GMA) [50-53], acrylamide (AAm) [54, 55], chloro-methylstyrene (CMS) [56, 57], vinylpyrrolidone (VPy) [58], Boc-p-amino-styrene (Boc-AMST) [59],andAT-vinylcarbazole (NVC) [60] (Table 1). Dispersion polymerization is usually carried out in organic liquids such as alcohols and cyclohexane, or mixed solvent-nonsolvents such as 2-butanol-toluene, alcohol-toluene, DMF-toluene, DMF-methanol, and ethanol-DMSO. In addition to conventional PVP, PAA, and PHC as dispersant, poly(vinyl methyl ether) (PVME) [54], partially hydrolyzed poly(vinyl alcohol) (hydrolysis=35%) [61], and poly(2-(dimethylamino)ethyl methacrylate-fo-butyl methacrylate)... [Pg.303]