Poly- styrenic

StmctLire, moriDhology and friction of tlriol-tenninated poly(styrene) have also been studied witlr atomic force microscopy [237, 238 and 239],... 

Waldman D A, Kolb B U, McCarthy T J and Hsu S L 1988 Infrared study of adsorbed monolayers of poly(styrene-propylene sulphide) (PS-PPS) block copolymers Polym. Mater. Sc/. Eng. 59 326-33... 

Polymerization of styrene is carried out under free radical conditions often with benzoyl peroxide as the initiator Figure 1111 illustrates a step m the growth of a poly styrene chain by a mechanism analogous to that of the polymerization of ethylene (Sec tion 6 21)... 

When a 0.8006-g sample of a poly(styrene/maleic anhydride) copolymer was prepared in the same manner, the following results were obtained... 

A review covers the preparation and properties of both MABS and MBS polymers (75). Literature is available on the grafting of methacrylates onto a wide variety of other substrates (76,77). Typical examples include the grafting of methyl methacrylate onto mbbers by a variety of methods chemical (78,79), photochemical (80), radiation (80,81), and mastication (82). Methyl methacrylate has been grafted onto such substrates as cellulose (83), poly(vinyl alcohol) (84), polyester fibers (85), polyethylene (86), poly(styrene) (87), poly(vinyl chloride) (88), and other alkyl methacrylates (89). 

Property Polystyrene (PS) Poly(styrene-i) (j-acrjio-nitrile ) (SAN) Glass-fil led PS High impact PS HIPS Acrylonitrile— butadiene—styrene terpolymer (ABS) Type 1 Type 2 Standard ABS Super ABS... 

Fig. 8. Thermogravimetric analysis of polymers and copolymers of styrene in nitrogen at 10°C/min A represents PS B, poly(vinyltoluene) C, poly(a-methylstyrene) D, poly(styrene-i (9-acrylonitrile), with 71.5% styrene E, poly(styrene-i (9-butadiene), with 80% styrene and F,...

Thermoplastic elastomers are often multiphase compositions in which the phases are intimately dispersed. In many cases, the phases are chemically bonded by block or graft copolymerization. In others, a fine dispersion is apparentiy sufficient. In these multiphase systems, at least one phase consists of a material that is hard at room temperature but becomes fluid upon heating. Another phase consists of a softer material that is mbberlike at RT. A simple stmcture is an A—B—A block copolymer, where A is a hard phase and B an elastomer, eg, poly(styrene- -elastomer- -styrene). 

Commercially, the poly(styrene-Aelastomer-Astyrene) materials are made by anionic polymerization (7,45—47). An alkyllithium initiator (RLi) first reacts with styrene [100-42-5] monomer ... 

I indicates compatible with polyisoprene segments B, compatible with polybutadiene seg-ments EB, compatible with poly (ethylene—butylene) segments and S, compatible with poly-styrene segments. 

ABS plastic, a polymer consisting of polybutadiene spheroids is dispersed in a continuous phase of poly(styrene—acrylonitrile). The chromic acid attacks the polybutadiene at a much higher rate than the continuous phase. This gives an excellent microroughened surface with superior metal-to-plastic bond strength. A typical recommended formulation consists of 20 vol % sulfuric acid, 420 g/L chromic acid, and 0.1—1.0% of a fluorocarbon wetting agent. The plastic is treated with this formulation for 6—10 min at 60—65°C. 

MO calculations, 2, 99 in photography, 1, 389 reactions with poly(styrene), 1, 309 structure, 2, 102 Bipyrimidines synthesis, 3, 103... 

Fig. 22. Adhesion rating based on flexural sti engths of laminates of poly(styrene) with glass treated with various silane coupling agents vs. solubility parameter of the organo-functional group of the coupling agent. From ref. [117], by permission.

TSK-GEL H type columns are for gel-permeation chromatography (GPC) in organic solvents. They are packed with porous poly(styrene-divinylbenzene) resins that have a high degree of cross-linking. 

It is well known that anionic samples tend to adsorb on poly(styrene-divinylbenzene) resins. However, cationic samples tend to be repelled from the resins. The mechanism seems to be an ionic interaction, although the poly(styrene-divinylbenzene) resin should be neutral. The reason is not well clarified. Therefore, it is recommended to add some salt in the elution solvent when adsorption or repulsion is observed in the analyses of polar samples. For example, polysulfone can be analyzed successfully using dimethylformamide containing 10 mM lithium bromide as an elution solvent, as shown in Fig. 4.42. 

---