Propylene copolymers

The weight percent propylene in ethylene-propylene copolymers for different Ziegler-Natta catalysts was measuredt for the initial polymer produced from identical feedstocks. The following results were obtained ... 

FEP film pLUORINE COMPOUNDS, ORGANIC - PERFLUORINATED ETHYLENE-PROPYLENE COPOLYMERS] (Vol 11) -P7E film for pLUORINE COMPOUNDS, ORGANIC - POLY(7UNYL FLUORIDE)] (7E111)... 

Perfluorinated ethylene—propylene copolymers, Tetrafluoroethylene—ethylene copolymers, Tetrafluoroethylene—perfluorovinyl ether copolymers, Poly(vinyl fluoride),... 

Heat and oil resistance coupled with its low swell have led automotive apphcations into laminated tubing and hoses (11) with this material. This resistance to the effects of ASTM No. 3 oil at service temperatures of 200°C makes it competitive with fluorocarbons and with the tetrafluoroethylene—propylene copolymer. Fluorosihcones are used to make exhaust gas recirculation (EGR) diaphragms for some passenger cars. 

Many cellular plastics that have not reached significant commercial use have been introduced or their manufacture described in Hterature. Examples of such polymers are chlorinated or chlorosulfonated polyethylene, a copolymer of vinyUdene fluoride and hexafluoropropylene, polyamides (4), polytetrafluoroethylene (5), styrene—acrylonitrile copolymers (6,7), polyimides (8), and ethylene—propylene copolymers (9). 

Organic peroxides are used in the polymer industry as thermal sources of free radicals. They are used primarily to initiate the polymerisation and copolymerisation of vinyl and diene monomers, eg, ethylene, vinyl chloride, styrene, acryUc acid and esters, methacrylic acid and esters, vinyl acetate, acrylonitrile, and butadiene (see Initiators). They ate also used to cute or cross-link resins, eg, unsaturated polyester—styrene blends, thermoplastics such as polyethylene, elastomers such as ethylene—propylene copolymers and terpolymers and ethylene—vinyl acetate copolymer, and mbbets such as siUcone mbbet and styrene-butadiene mbbet. 

Combination techniques such as microscopy—ftir and pyrolysis—ir have helped solve some particularly difficult separations and complex identifications. Microscopy—ftir has been used to determine the composition of copolymer fibers (22) polyacrylonitrile, methyl acrylate, and a dye-receptive organic sulfonate trimer have been identified in acryHc fiber. Both normal and grazing angle modes can be used to identify components (23). Pyrolysis—ir has been used to study polymer decomposition (24) and to determine the degree of cross-linking of sulfonated divinylbenzene—styrene copolymer (25) and ethylene or propylene levels and ratios in ethylene—propylene copolymers (26). 

Similarly, the random introduction by copolymerization of stericaHy incompatible repeating unit B into chains of crystalline A reduces the crystalline melting point and degree of crystallinity. If is reduced to T, crystals cannot form. Isotactic polypropylene and linear polyethylene homopolymers are each highly crystalline plastics. However, a random 65% ethylene—35% propylene copolymer of the two, poly(ethylene- (9-prop5lene) is a completely amorphous ethylene—propylene mbber (EPR). On the other hand, block copolymers of the two, poly(ethylene- -prop5iene) of the same overall composition, are highly crystalline. X-ray studies of these materials reveal both the polyethylene lattice and the isotactic polypropylene lattice, as the different blocks crystallize in thek own lattices. 

The use of TAG as a curing agent continues to grow for polyolefins and olefin copolymer plastics and mbbers. Examples include polyethylene (109), chlorosulfonated polyethylene (110), polypropylene (111), ethylene—vinyl acetate (112), ethylene—propylene copolymer (113), acrylonitrile copolymers (114), and methylstyrene polymers (115). In ethylene—propylene copolymer mbber compositions. TAG has been used for injection molding of fenders (116). Unsaturated elastomers, such as EPDM, cross link with TAG by hydrogen abstraction and addition to double bonds in the presence of peroxyketal catalysts (117) (see Elastol rs, synthetic). 

Eor curing copolymers of tetrafluoroethylene and perfluorovinyl ether, addition of ca 4% TAG has been proposed (118). TEE—propylene copolymers have been cured by TAG and organic peroxide (119). Copolymers of TEE-propylene-vinyUdene fluoride are cured with TAG by heating at 200°C. 

Pubhcations on curing polymers with TAIC include TEE—propylene copolymer (135), TEE—propylene—perfluoroaHyl ether (136), ethylene—chlorotrifluoroethylene copolymers (137), polyethylene (138), ethylene—vinyl acetate copolymers (139), polybutadienes (140), PVC (141), polyamide (142), polyester (143), poly(ethylene terephthalate) (144), sdoxane elastomers (145), maleimide polymers (146), and polyimide esters (147). 

Steel [52013-36-2] suture is made from 316-L stainless steel wire. The suture may be monofilament, known as fixation wire, or multifilament twisted wires. The steel is heat-treated to improve ductility. The multifilament strands are either uncoated, or coated with Tefion (polytetrafiuoroethylene) or Tefion-fiuorinated ethylene—propylene copolymer. 

Although the mbbery properties of ethylene—propylene copolymers are exhibited over a broad range of compositions, weight percentages of commercial products generally range from 50 50 to 75 25 ethylene propylene. 

By block copolymerisation so that one component of the block copolymer has a Tg well below the expected service temperature range (e.g polypropylene with small blocks of polyethylene or preferably polypropylene with small amorphous blocks of ethylene-propylene copolymer). 

One unfortunate characteristic property of polypropylene is the dominating transition point which occurs at about 0°C with the result that the polymer becomes brittle as this temperature is approached. Even at room temperature the impact strength of some grades leaves something to be desired. Products of improved strength and lower brittle points may be obtained by block copolymerisation of propylene with small amounts (4-15%) of ethylene. Such materials are widely used (known variously as polyallomers or just as propylene copolymers) and are often preferred to the homopolymer in injection moulding and bottle blowing applications. 

Two random copolymers of this type are of importance, ethylene-propylene copolymers and ethylene-but-l-ene copolymers. The use and properties of polypropylene containing a small quantity of ethylene in stereoblocks within the molecule has already been discussed. Although referred to commercially as ethylene-propylene copolymers these materials are essentially slightly modified polypropylene. The random ethylene-propylene polymers are rubbery and are discussed further in Section 11.9. 

The fluororubbers also form an important class of speciality elastomers and although the market is dominated by the vinylidene fluoride-hexafluoro-propylene copolymers a wide range of materials has been produced over the past 40 years. 

A hexagonal phase is found at room temperature and atmospheric pressure in some ethylene-propylene copolymers containing a small amount of diene component [86,93]. 

---