Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Analysis testing

Jungreis, E. Spot Test Analysis, 2nd ed. Wiley New York, 1997. [Pg.272]

The algorithm for estimating the LDC and LDM for teehniques of test analysis with visual indieation is suggested. It ineludes the steps to eheek the suffieieney of experimental material [1]. The hypothesis ehoiee about the type of frequeney distribution in unreliable reaetion (UR) region is based on the ealeulation of eriteria eomplex Kolmogorov-Smirnov eriterion,... [Pg.307]

Elliott reeommends serviees of two witnesses be employed during the instrument ealibration and test. Expenses assoeiated with the field test would be a per diem rate for the serviee engineer, travel and living expenses at eost plus 10% administrative eharge, and a maximum limit of eight man-day eharge for pre- and post-test analysis and report preparation (typieal unit). [Pg.324]

Collecting a sample is a costly and timecosts minimized consistent with other objectives. It makes little sense to spend 5000 on an extensive stack testing analysis to decide whether to purchase a 10,000 scrubber of 95% efficiency or to try to get by with a 7000 scrubber of 90% efficiency. [Pg.533]

Energy-dispersive X-ray spectroscopy has been used for quality control and test analysis in many industries including computers, semiconductors, metals, cement, paper, and polymers. EDS has been used in medicine in the analysis of blood, tis-... [Pg.121]

Experimental Results for Series W Tests, Analysis and Program Summary, DIERS/AIChE, 1986, 259 pages. [Pg.541]

The high resistivity of Inconel 600 (11 OjtI 0 8 Dm) demanded the application of this material as a composite with a central aluminum core. The aluminum was totally enclosed in Inconel 600 so that the Inconel was only exposed to sulfur and polysulfides. In a test over more than three years, cells with a composite current collector of this kind suffered from a high capacity decline. Post-test analysis showed that Inconel sustained polysulfide attack with the formation of a duplex nickel and chromium sulfide layer on the current collector surface. [Pg.576]

R.B. Yeager, Tire hydroplaning testing, analysis and design. The Physics of Tire Traction, Theory and Experiment. D.L. Hayes and A.L. Browne (eds.). Plenum Press, New York/London, 1974, 143. [Pg.760]

Spot Test Analysis Clinical, Environmental, Forensic and Geochemical Applications. By Ervin Jungreis... [Pg.446]

Data analysis routines may change with time, and it is desirable to be able to reanalyze old data with new analysis software. Our tensile test analysis software creates plots of engineering stress as a function of engineering strain, as illustrated in Figure 3. Our flexure test software plots maximum fiber stress as a function of maximum fiber strain, with the option of including Poisson s ratio in the calculations. Both routines generate printed reports which present the test results in tabular form, as illustrated in Figure 4. [Pg.50]

Several brevetoxins have been examined for their respective abilities to competitively displace tritiated brevetoxin PbTx-3 from its specific site of action in brain synaptosomes. Analysis of IC q values revealed no marked differences in the displacing abilities between any of the type-1 toxins, and similarly there was no apparent difference between displacing abilities of PbTx-1 or -7, both type-2 toxins. Although some specific details require correlation, a gross comparison indicates that sodium channels in brain are similar in the systems examined. In the system studied most extensively, the rat brain synaptosome, t-test analysis revealed no significant differences between PbTx-2 and PbTx-3 IC q, or between PbTx-1 and PbTx-7 IC q, but statistically significant differences were found between the two classes (P<0.01) (5). If the Cheng-Prusoff equation (15) is applied ... [Pg.171]

Wolf WR and Iyengar V (1996) Nutritional metrology Food-based reference materials. Food Testing Analysis 2(6) 27-3i. [Pg.292]

In practice when reservoir parameters such as porosities and permeabilities are estimated by matching reservoir model calculated values to field data, one has some prior information about the parameter values. For example, porosity and permeability values may be available from core data analysis and well test analysis. In addiction, the parameter values are known to be within certain bounds for a particular area. All this information can be incorporated in the estimation method of the simulator by introducing prior parameter distributions and by imposing constraints on the parameters (Tan and Kalogerakis, 1993). [Pg.381]

Helmont Testing, Analysis, and Assaying in Late Medieval Alchemy Alexander Von Suchten and the Sixteenth-Century Synthesis of Chymical Traditions Joan Baptista Van Helmont Art, Nature, and Experiment Conclusions THREE. [Pg.246]

In a serial mode (Fig. 36.1), one experimental step (in catalysis research this is usually the preparation of the ligand or the catalyst) is repeated n times before moving on to the next step. The only difference with traditional research is that the complete experiment (synfhesis/testing/analysis) is carried out for a set of catalysts rather than for an individual species. For example, a library of ligands from the same class can be assembled via traditional organic synthesis prior to its testing in catalysis. (A library of compounds is a rather large collection of different compounds with some common features and usually the same function, for example triarylphosphines or imidazolidinones.) Ideally, the compounds in the library can be structurally varied in at least two positions to ere-... [Pg.1248]

There is probably nothing more confusing than the definition of a laboratory. For the sake of consistency in this chapter a laboratory is defined as a building, space, room, equipment, or operation used for testing, analysis, research, instruction, or similar activities. To further explain this definition, a room is considered a laboratory if any of the following exist ... [Pg.225]

Homoscedasticity is an important assumption for Student s /-test, analysis of variance, and analysis of covariance. [Pg.903]

Jenkins, J. D. and Prentice, J. K., 1982, Theory for Aquifer Test Analysis in Fractured Rock under Linear (Non-Radial) Flow Conditions Ground Water, Vol. 20, pp. 12-21. [Pg.86]

Suaveplane, C., 1984, Planning Test Analysis in Fracture Aquifer Formations State of the Art and Some Perspectives Ground Water Hydraulics, Water Resources Monograph Series No. 9, pp. 171-206. [Pg.88]

Some concentrated nitric acid may be produced as a by-product in the SILVER II process when processing energetics compounds, which contain nitrogen. The material will be collected and sold to off-site users. During Demo II testing, analysis of nitric acid samples by the Ensign-Bickford Company determined that the... [Pg.85]

Simplicity and reliability of operation make AC impedance measurements attractive as a technique in the evaluation of coating integrity. As opposed to classical salt spray test, analysis times are shorter with the AC impedance technique and quantitative data are obtained permitting relevant mechanistic Information to be derived. Impedance test methods are likely to find many applications in the resolution of unsolved practical problems ( .) ... [Pg.58]

A second reason for randomisation is that from a statistical perspective it ensures the validity of the standards approaches to statistical inference, t-tests, analysis of variance (ANOVA), etc. [Pg.294]


See other pages where Analysis testing is mentioned: [Pg.205]    [Pg.2560]    [Pg.307]    [Pg.330]    [Pg.55]    [Pg.127]    [Pg.113]    [Pg.779]    [Pg.5]    [Pg.11]    [Pg.37]    [Pg.177]    [Pg.15]    [Pg.181]    [Pg.64]    [Pg.41]    [Pg.110]   
See also in sourсe #XX -- [ Pg.256 ]




SEARCH



Additive analysis Tests

Analyses of variance - going beyond t-tests

Analysis Nondestructive testing

Analysis and testing in preparatory processes

Analysis methods routine tests

Analysis of hardness testing indentations

Analysis of test data

Analysis of tests and maintenance

Analysis of the Charpy and Izod Impact Tests Using Fracture Mechanics

Analysis of variance tests

Analysis tests

Analysis tests

Analysis tests for

Behavior Analysis and Safety Improvement Categories .Alcohol drug testing

Biodegradability test analysis

Chemical analysis of fabric finishes and performance-related tests

Chemical analysis/categorization/testing

Chemical testing trace element analysis

Choice test statistical analysis

Collaborative Testing and Analysis of Variance

Colorant testing instrumental analysis

Colorant testing qualitative analysis

Colorant testing quantitative analysis

Comfort testing and fit analysis of military textiles

Corrosion Testing, Detection, Monitoring and Failure Analysis

Damping test process analysis

Data Analysis Hypothesis testing

Data analysis test approach

Descriptive analysis tests

Designing experiments for maximum information from cyclic oxidation tests and their statistical analysis using half normal plots (COTEST)

Differential thermal analysis screening tests

Dose-response tests probit analysis

Dynamic mechanical analysis relaxation testing

Emission Testing and Analysis

Extractability testing headspace analysis

Extraction tests for soil and sediment analysis

Failure analysis mechanical testing

Failure analysis thermal testing

Finite element analysis testing

Flow Analysis and Stress Testing

Handbook of Plastics Testing and Failure Analysis, Third Edition, by Vishu Shah

Identification tests surface analysis

Impurity testing HPLC analysis

Indicator tests, qualitative analysis

Large-Scale Analysis and Testing

Mechanical properties testing creep analysis

Mist reduction, spray analysis test

Moisture analysis tests

Nonparametric analysis Kruskal-Wallis test

Optical analysis test

Panel test for organoleptic analysis

Photoelastic stress analysis test

Powders, test methods thermal analysis

Preparation, Tests and Analysis of Manganese (III) Acetylacetonate

Preparation, Tests and Analysis of Mn(III) Compounds

Proficiency testing for contaminated soil analysis

Proficiency testing organic analysis

Proficiency-testing analysis

Qualitative organic analysis classification tests

Rank analyses Kruskal-Wallis test

Reliability testing thermal-cycle analysis

Results of Structural Analysis and Hypotheses Testing

Sample analysis proficiency-testing

Shear cell test analysis

Sieve analysis test

Signal Measurement, Analysis, and Testing

Spot test analysis

Spray analysis test

Spray analysis test polymers

Statistical analyses Kruskal-Wallis test

Statistical analysis proficiency testing

Statistical test cluster analysis

Stress analysis fatigue testing

Stress analysis testing

Structural Analysis and Hypothesis Testing

Target testing, factor analysis

Tensile testing fracture analysis

Test Method for Analysis of o-Xylene by Gas Chromatography

Test Method for Analysis of p-Xylene by Gas Chromatography

Test analysis, micromechanical

Test and Analysis

Test safety analysis

Testing and Analysis

Testing and analysis techniques in rare earth inhibitor research

Testing chemical analysis

Testing dynamic mechanical analysis

Testing methods dynamic mechanical analysis

Testing methods image analysis

Testing methods particle size analysis

Testing methods thermal analysis

Testing organoleptic analysis

Tests and analyses of sizes

Thermal analysis standard test methods

Thermal analysis test methods

Thermal mechanical analysis test

Thermal tests thermogravimetric analysis

Thermogravimetric analysis test

Thermogravimetric analysis test INDEX

Thermomechanical analysis mechanical tests

Thermomechanical analysis test

Toxicity testing, microarray analysis

Utility of HPLC Analysis in Dissolution Testing

© 2024 chempedia.info