Thermal analysis standard test methods

Standard Method for Evaluation of Temperature Scale for Differential Thermal Analysis Standard Practice for Evaluating Temperature Scale for Thermogravimetry Standard Test Method for Transition Temperatures of Polymers by Thermal Analysis Standard Test Method for Melting Temperatures and Crystallization Temperatures by Thermal Analysis... [Pg.12]

Standard Test Method for Constant-temperature Stability of Chemical Materials Standard Test Method for Arrhenius Kinetic Constants for Thermal Un.stable Materials Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method Standard Test Method for Autoignition Temperature of Liquid Chemicals Standard Test Method for Specific Heat of Aircraft Turbine Lubricants by Thermal Analysis Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermodilatometry... [Pg.12]

In addition to chemical analysis a number of physical and mechanical properties are employed to determine cemented carbide quaUty. Standard test methods employed by the iadustry for abrasive wear resistance, apparent grain size, apparent porosity, coercive force, compressive strength, density, fracture toughness, hardness, linear thermal expansion, magnetic permeabiUty, microstmcture, Poisson s ratio, transverse mpture strength, and Young s modulus are set forth by ASTM/ANSI and the ISO. [Pg.444]

ASTM E 1356-98, ASTM Book of Standards 2002. Standard Test Method for Assignment of the Glass Transition Temperature by Differential Scanning Calorimetry or Differential Thermal Analysis . ASTM International, Conshohocken, PA. [Pg.90]

ASTM D 3418-82, Standard Test Method for Transition Temperatures of Polymers by Thermal Analysis, 1982. [Pg.129]

ASTM E831, 2003. Standard test method for linear thermal expansion of solid materials by thermomechanical analysis. [Pg.313]

The third section is a brief invited presentation of several non-standardized test methods currently in use. These methods are thermal analysis, analytical pyrolysis, and molecular-weight determination and distribution. [Pg.354]

C26.05 0413-99 Standard Test Method for Isotopic Analysis of UF6 and UNH Solutions by Thermal Ionization Mass Spectrometry... [Pg.411]

Of interest in studies of polymer degradation are two standard tests, the ASTM D 3850 (1994) test method for rapid thermal degradation of solid electrical insulating materials by thermogravimetric method, and the ASTM D 6370 (1999) standard test method for rubber compositional analysis by thermogravimetry. [Pg.37]

E 422 (1994) Test method for measuring heat flux using a water-cooled calorimeter E 472 (1991) Reporting thermoanalytical data E 473 (1999) Terminology relating to thermal analysis E 476 (1993) Standard test method for thermal instability of confined condensed phase systems (confinement test)... [Pg.203]

Thermomechanical-analysis (TMA) testing is used to measure a material s expansion coefficient above and below the glass-transition temperature or Tg. Thermomechanical analysis continuously monitors the expansion of a probe on a sample as a function of temperature. The standard test method for TMA is ASTM D3386, Coefficient of Linear Thermal Expansion of Electrical Insulating Materials.In addition to the glass-transition temperature or Tg, the expansion coefficients above and below Tg are reported. [Pg.367]

Murphy CB. Differential thermal analysis. Anal Chem. May. 1960 32 168R-71R. Murphy CB. Differential thermal analysis. Anal Chem. Apr. 1962 34 298R-301R. Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded Hot-Plate Apparatus, ASTM C177, Am Soc. For Testing and Materials. Jan. 11, 2004. [Pg.376]

ASTM E831-06 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis... [Pg.24]

C1413. (2011). Standard test method for isotopic analysis of hydrolyzed uranium hexafluoride and uranyl nitrate solutions by Thermal Ionization Mass Spectrometry. West Conshohocken, PA ASTM. [Pg.112]

Standard Test Method for Oxidative Induction Time of Polyolefins by Thermal Analysis Standard Method for Assessing the Thermal Stability of Chemicals by Methods of Differential Thermal Analysis... [Pg.12]

Test method for glass transition temperatures by differential scanning calorimetry or differential thermal analysis Standard practice for calibration of temperature scale for thermogravimetry... [Pg.106]

E473, Standard Terminology Relating to Thermal Analysis and Rheology E698, Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials... [Pg.225]

Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis... [Pg.243]

Standard Test Method for Assessing the Thermal Stability of Chemicals by Method of Differential Thermal analysis. (Specimens weight varies from 20 to 30 mg. The reference was an empty pan. The Heat Rate used was 10 °C/min) Standard Test Method for Temperature Calibration of Differential scanning Calorimeters and Differential Thermal Analyzers... [Pg.208]

Thermal Properties. The thermal stabiUty of cellulose esters is deterrnined by heating a known amount of ester in a test tube at a specific temperature a specified length of time, after which the sample is dissolved in a given amount of solvent and its intrinsic viscosity and solution color are deterrnined. Solution color is deterrnined spectroscopically and is compared to platinum—cobalt standards. Differential thermal analysis (dta) has also been reported as a method for determining the relative heat stabiUty of cellulose esters (127). [Pg.258]