Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Relation factors

Filter Selection. A variety of product- and process-related factors govern filter selection. Considerations include the characteristics of the fluid to be filtered, ie, its chemical composition and compatibiHty with the filtration system (inclusive of the membrane, filter hardware, piping, etc), the level of bioburden present, specifications on effluent quaHty, the volume of product to be filtered, flow rate, and temperature. [Pg.139]

Density and Ink Film Thickness. Because ink film thickness directly impacts color, it is important to control film thickness on press. The amount of ink transferred to paper, along with a related factor, dot gain, which refers to how the halftone dots spread under the pressure of the printing process, is the tool by which a press operator monitors color on press. [Pg.55]

The currendy (ca 1992) marketed injectable and implantable contraceptives are designed to be effective for maximum periods of three months and five years, respectively. There is Htde evidence from programmatic or health reasons that an injectable formulation with a longer effective life span, eg, six months, would not be equally effective. The acceptabiUty and effectiveness of long-acting contraceptives may be determined by the means by which a community deUvers contraceptive products to the pubHc the active life of a product may be determined by economic rather than programmatic or health related factors. [Pg.117]

Mischke, C. R. 1970 A Method of Relating Factor of Safety and Reliability. Journal of Engineering for Industry, August, 537-542. [Pg.389]

The selection of a suitable matrix for a composite material involves many factors, and is especially important because the matrix is usually the weak and flexible link in all properties of a two-phase composite material. The matrix selection factors include ability of the matrix to wet the fiber (which affects the fiber-matrix interface strength), ease of processing, resulting laminate quality, and the temperature limit to which the matrix can be subjected. Other performance-related factors include strain-to-failure, environmental resistance, density, and cost. [Pg.392]

Management policies have an all pervasive effect on the activities of individuals at every level in the organization. The safety-related factors at the management level which have been considered in the organizational systems perspective in Chapter 2, will be summarized here to complete the general classification scheme of PIFs. [Pg.145]

Considerations for the allocation of funds should include economic and public relations factors. Identical FARs do not necessarily result in equal consequences effects on plant production, public relations, and oilier factors must also be considered. Finally, FARs in excess of 4.0 are not acceptable. [Pg.535]

Two speed-related factors should be considered as part of the selection process maximum speed and speed variation. [Pg.996]

The Effect of Creep and Other Time Related Factors on Plastics... [Pg.596]

The wide range of inflammation-related factors that adipocytes secrete is linked to the inflammatory response that the tissue exhibits in obesity [1]. Obesity in general, like an increasing number of other diseases, is characterised by a state of mild chronic inflammation, and adipose tissue plays a central role in this. The production of most inflammation-related adipokines increases markedly in obesity and there is an elevated circulating level of a number of these factors as well as of other inflammatory markers such as C-reactive protein (CRP). The increased production of inflammatory adipokines (and decreased production of adiponectin with its anti-inflammatory action) in the obese is considered to play a critical role in the development of the obesity-associated pathologies, particularly type 2 diabetes and the metabolic syndrome [1]. [Pg.39]

A direct relationship is found between the hardness of a material and its ability to withstand mechanical wear, and as a rule the harder the material, the greater is its wear resistance. A related factor is that harder materials usually take a better polish and, as a result, the wear due to surface roughness mentioned above can be minimized. Choosing material combinations with a low coefficient of friction is also an important factor in reducing mechanical wear. [Pg.428]

Sterner DE, Berger SL Acetylation of histones and transcription-related factors. Microbiol Mol Biol Rev 2000 64 435. [Pg.395]

A number of factors described as influencing carotenoid bioavailability were regrouped under the SLAMENGFll mnemonic. Species of carotenoid. Linkages at molecular level. Amount of carotenoids consumed in a meal. Matrix in which the carotenoid is incorporated. Effectors of absorption and bioconversion. Nutrient status of the host. Genetic factors. Host-related factors, and Interactions among these variables. Only the factors that affect the micellarization of the compound in the gut are discussed and summarized in Table 3.2.1. [Pg.156]

Figure 1 Inter-related factors affecting the design of terrestrial field soil dissipation studies... Figure 1 Inter-related factors affecting the design of terrestrial field soil dissipation studies...
Schoeters G, Van Den Heuvel R, Hurtgen C, et al. 1987. 241Am distribution in foetal haemopoietic organs of balb/c mice. In Age-related factors in radionuclide metabolism and dosimetry. Netherlands Kluwer Academic Publishers, 193-200. [Pg.259]


See other pages where Relation factors is mentioned: [Pg.55]    [Pg.281]    [Pg.530]    [Pg.493]    [Pg.201]    [Pg.97]    [Pg.102]    [Pg.1722]    [Pg.313]    [Pg.172]    [Pg.40]    [Pg.616]    [Pg.40]    [Pg.39]    [Pg.617]    [Pg.202]    [Pg.80]    [Pg.27]    [Pg.12]    [Pg.73]    [Pg.138]    [Pg.841]    [Pg.849]    [Pg.859]    [Pg.423]    [Pg.4]    [Pg.24]    [Pg.151]    [Pg.495]    [Pg.1027]    [Pg.1028]    [Pg.1457]    [Pg.104]   
See also in sourсe #XX -- [ Pg.123 ]




SEARCH



Acyl related factors

Adverse drug reactions patient-related factors

Constant separation factor adsorption equilibrium relation

Contrast patient-related factor

Endocrine factors, related

Epithelial growth factor-related kinase

Factor relation with regression parameters

Factor selection mixture-related factors

Factors Related to Solubility

Factors Related to the Environment

Factors Relating to Medication Availability and Pricing

Filtration equipment-related factors

Food and Related Factors

Formulation-Related Factors

General factors relating to waste generation in the chemical industry

Granulation-Related Factors

Hazard-related incidents/exposures factors

Hazards-related incident multiple factors

Human Factors-Related Formulas

Liver patient-related factor

Market-related factors

Method development mixture-related factors

Mixture-related factors, method

Multiple causal factors hazards-related incident

Non-procedure related factors

Nrf2 (nuclear factor-erythroid 2-related

Nuclear factor erythroid-2-related

Nursing-Related Factors in Medication Errors Occurrence

Pharmacokinetics drug-related factor

Procedure related factors

Production-related factors

Relation to Other Environmental Factors and Natural Incidence

Relations between Shape Factors

Runt-related transcription factor

Safety factors emulsion-related

Safety factors fixative-related

Some Chemical and Structural Factors Related to the Metastabilities of Energetic Compounds

Stent thrombosis factors related

Symmetry factor relation

TFIIB-related factor

TRAIL (tumor necrosis factor-related

Tafel Slope Factor in Electrocatalysis and Its Relation to Chemisorption of Intermediates

Toxicokinetic-Related Individual Susceptibility Factors

Tumor necrosis factor-related apoptosis

Tumor necrosis factor-related apoptosis-inducing ligand

View factor reciprocity relation

© 2019 chempedia.info