Poly-2-methyl-1,4-butadiene

Natural rubber (Hevea brasiliensis) is as-poly-2-methyl-1,4-butadiene, and gutta-percha (Palaquium oblongi/olium) and balata (Minusops globosa) are polymers of isoprene (2-methyl-1,4-butadiene) with trans configurations. Neoprene is a polymer of 2-chloro-1,3-butadiene (chloroprene). 

Acrylics. Acetone is converted via the intermediate acetone cyanohydrin to the monomer methyl methacrylate (MMA) [80-62-6]. The MMA is polymerized to poly(methyl methacrylate) (PMMA) to make the familiar clear acryUc sheet. PMMA is also used in mol ding and extmsion powders. Hydrolysis of acetone cyanohydrin gives methacrylic acid (MAA), a monomer which goes direcdy into acryUc latexes, carboxylated styrene—butadiene polymers, or ethylene—MAA ionomers. As part of the methacrylic stmcture, acetone is found in the following major end use products acryUc sheet mol ding resins, impact modifiers and processing aids, acryUc film, ABS and polyester resin modifiers, surface coatings, acryUc lacquers, emulsion polymers, petroleum chemicals, and various copolymers (see METHACRYLIC ACID AND DERIVATIVES METHACRYLIC POLYMERS). 

Poly(ethylene terephtlhalate) Phenol-formaldehyde Polyimide Polyisobutylene Poly(methyl methacrylate), acrylic Poly-4-methylpentene-1 Polyoxymethylene polyformaldehyde, acetal Polypropylene Polyphenylene ether Polyphenylene oxide Poly(phenylene sulphide) Poly(phenylene sulphone) Polystyrene Polysulfone Polytetrafluoroethylene Polyurethane Poly(vinyl acetate) Poly(vinyl alcohol) Poly(vinyl butyral) Poly(vinyl chloride) Poly(vinylidene chloride) Poly(vinylidene fluoride) Poly(vinyl formal) Polyvinylcarbazole Styrene Acrylonitrile Styrene butadiene rubber Styrene-butadiene-styrene Urea-formaldehyde Unsaturated polyester... 

Since this pioneering work a number of IPNs have been prepared. Poly(styrene) has been used as the second network polymer in conjunction with several other polymers, including poly(ethyl acrylate), poly(n-butyl acrylate), styrene-butadiene, and castor oil. Polyurethanes have been used to form IPNs with poly(methyl methacrylate), other acrylic polymers, and with epoxy resins. 

Figure 14.9 Effect of various impact modifiers (25wt%) on the notched Izod impact strength of recycled PET (as moulded and annealed at 150°C for 16 h) E-GMA, glycidyl-methacrylate-functionalized ethylene copolymer E-EA-GMA, ethylene-ethyl acrylate-glycidyl methacrylate (72/20/8) terpolymer E-EA, ethylene-ethyl acrylate EPR, ethylene propylene rubber MA-GPR, maleic anhydride grafted ethylene propylene rubber MBS, poly(methyl methacrylate)-g-poly(butadiene/styrene) BuA-C/S, poly(butyl acrylate-g-poly(methyl methacrylate) core/shell rubber. Data taken from Akkapeddi etal. [26]...

MBS (poly(methyl methacrylate)-g-poly(butadiene/styrene) graft copolymer) Paraloid EXL Rohm Haas... 

Emulsion polymerization is used for 10-15% of global polymer production, including such industrially important polymers as poly(acrylonitrile-butadiene-styrene) (ABS), polystyrene, poly(methyl methacrylate), and poly (vinyl acetate) [196]. These are made from aqueous solutions with high concentrations of suspended solids. The important components have unsaturated carbon-carbon double bonds. Raman spectroscopy is well-suited to address these challenges, though the heterogeneity of the mixture sometimes presents challenges. New sample interfaces, such as WAI and transmission mode, that have shown promise in pharmaceutical suspensions are anticipated to help here also. 

PS (polystyrene), PVC [poly(vinyl chloride)], PC (bisphenol A polycarbonate) PMMA [poly (methyl methacrylate)], PB (polybutadiene), SAN (styrene-acrylonitrile copolymer),NBR (acrylonitrile-butadiene rubber), PPE (polyphenylene ether), SBR (styrene-butadiene rubber)... 

Similar to other coupled methods of polymer HPLC, for example, LC CC (Section 16.5.2), the choice of the column packing and the mobile phase components for EG-LC depends on the retention mechanism to be used. Adsorption is preferred for polar polymers applying polar column packings, usually bare silica or silica bonded with the polar groups. The eluent strength controls polymer retention (Sections 16.3.2 and 16.3.5). The enthalpic partition is the retention mechanism of choice for the non polar polymers or polymers of low polarity. In this case, similar to the phase separation mechanism, mainly the solvent quality governs the extent of retention (Sections 16.2.2, 16.3.3, and 16.3.7). It is to be reminded that even the nonpolar polymers such as poly(butadiene) may adsorb on the surface of bare silica gel from the very weak mobile phases and vice versa, the polymers of medium polarity such as poly(methyl methacrylate) can be retained from their poor solvents (eluents) due to enthalpic partition within the nonpolar alkyl-bonded phases. 

Since the late 1960 s a few papers have demonstrated compositional analysis of various polymer systans by Raman spectroscopy. For example, Boerio and Yuann (U) developed a method of analysis for copolymers of glycidyl methacrylate with methyl methacrylate and styrene. Sloane and Bramston-Cook (5) analyzed the terpolymer system poly(methyl methacrylate-co-butadiene-co-styrene). The composition of copolymers of styrene-ethylene dimethacrylate and styrene-divinylbenzene was determined by Stokr et (6). Finally, Water (7) demonstrated that Raman spectroscopy could determine the amount of residual monomer in poly(methyl methacrylate) to the % level. This was subsequently lowered to less than 0.1% (8). In spite of its many advantages, the potential of Raman spectroscopy for the analysis of polymer systems has never been fully exploited. 

In general, there are two distinctively different classes of polymerization (a) addition or chain growth polymerization and (b) condensation or step growth polymerization. In the former, the polymers are synthesized by the addition of one unsaturated unit to another, resulting in the loss of multiple bonds. Some examples of addition polymers are (a) poly(ethylene), (b) poly(vinyl chloride), (c) poly(methyl methacrylate), and (d) poly(butadiene). The polymerization is initiated by a free radical, which is generated from one of several easily decomposed compounds. Examples of free radical initiators include (a) benzoyl peroxide, (b) di-tert-butyl peroxide, and (c) azobiisobutyronitrile. 

In polymers that exhibit tacticity, the extent of the stereoregularity determines the crystallinity and the physical properties of the polymers. The placement of the monomer units in the polymer is controlled first by the steric and electronic characteristics of the monomer. However, the presence or absence of tacticity, as well as the type of tacticity, is controlled by the catalyst employed in the polymerization reaction. Some common polymers, which can be prepared in specific configuration, include poly(olefins), poly(styrene), poly(methyl methacrylate), and poly(butadiene). 

The residual double bonds of poly(methyl acrylate) have been determined by bromination [9,27]. Bromination is accomplished through the addition of potassium bromide to potassium bromate in acidic medium [9]. Styrene-butadiene copolymers contain residual double bonds. The butadiene content of the copolymer has been determined by an iodine monochloride titration procedure [9],... 

Such impact modifiers containing copolymers of butadiene and styrene and at least one stage or shell of poly(methyl methacrylate) are known MMBS core-shell polymers. 

A number of remarkable new morphologies have recently been discovered by Stadler and co-workers in poly (styrene) poly(butadiene)-poly (methyl methacrylate) (PS-PB-PMMA) triblocks, and their hydrogenated analogues. poly(styrene)-poly(ethylene-co-butylene) poly(methyl methacrylate) (PS-PEB-PMMA) (Breiner et al. 1996,1997 Krappe et al. 1995 Stadler et al. 1995). The common features of the polymers exhibiting this complex phase behaviour are that the midblock is the minority component and that the incompatibility between the outer blocks is much weaker than the incompatibility of each of... 

MC MDI MEKP MF MMA MPEG MPF NBR NDI NR OPET OPP OSA PA PAEK PAI PAN PB PBAN PBI PBN PBS PBT PC PCD PCT PCTFE PE PEC PEG PEI PEK PEN PES PET PF PFA PI PIBI PMDI PMMA PMP PO PP PPA PPC PPO PPS PPSU Methyl cellulose Methylene diphenylene diisocyanate Methyl ethyl ketone peroxide Melamine formaldehyde Methyl methacrylate Polyethylene glycol monomethyl ether Melamine-phenol-formaldehyde Nitrile butyl rubber Naphthalene diisocyanate Natural rubber Oriented polyethylene terephthalate Oriented polypropylene Olefin-modified styrene-acrylonitrile Polyamide Poly(aryl ether-ketone) Poly(amide-imide) Polyacrylonitrile Polybutylene Poly(butadiene-acrylonitrile) Polybenzimidazole Polybutylene naphthalate Poly(butadiene-styrene) Poly(butylene terephthalate) Polycarbonate Polycarbodiimide Poly(cyclohexylene-dimethylene terephthalate) Polychlorotrifluoroethylene Polyethylene Chlorinated polyethylene Poly(ethylene glycol) Poly(ether-imide) Poly(ether-ketone) Polyethylene naphthalate Polyether sulfone Polyethylene terephthalate Phenol-formaldehyde copolymer Perfluoroalkoxy resin Polyimide Poly(isobutylene), Butyl rubber Polymeric methylene diphenylene diisocyanate Poly(methyl methacrylate) Poly(methylpentene) Polyolefins Polypropylene Polyphthalamide Chlorinated polypropylene Poly(phenylene oxide) Poly(phenylene sulfide) Poly(phenylene sulfone)... 

Poly([7,8-bis(trifluoromethyl)tetracyclo [4.2.0.02 8.05 7]octane-3,4-diyl]-1,2-ethenediyl), 3457 Poly[borane(l)], 0134 crs-Poly (butadiene), 1480 Poly(l,3-butadiene peroxide), 1528 Poly(butadiyne), 1382 Poly(carbon monofluoride), 0336 Poly(chlorotrifluoroethylene), 0589 Poly(l,3-cyclohexadiene peroxide), 2380 Poly(cyclopentadienyltitanium dichloride), 1837 Poly(diazidophosphazene), 4781 Poly(dibromosilylene), 0282 Poly(difluorosilylene), 4324 Poly(dihydroxydioxodisilane), 4474 Poly(dimercuryimmonium acetylide), 0665 Poly(dimercuryimmonium azide), 4606 Poly(dimercuryimmonium bromate), 0253 Poly (dimercury immonium iodide hydrate), 4449 Poly (dimercury immonium perchlorate), 4006 Poly(dimercuryimmonium permanganate), 4603 Poly (dime thylketene peroxide), see Poly(peroxyisobutyrolactone), 1531 Poly(dimethylsiloxane), 0918 Poly(disilicon nitride), 4752 Poly(ethenyl nitrate), see Poly(vinyl nitrate), 0760 Poly(ethylene), 0778 Poly(ethylene terephthalate), 3256 Poly(ethylidene peroxide), 0831 Poly(furan-2,5-diyl), 1398 Poly(germanium dihydride), 4409 Poly(germanium monohydride), 4407 Poly(isobutene), 1578 Poly(methyl methacrylate peroxide), 1913... 

In order to overcome the build-up of these stresses, the addition of triblock terpolymers as compatibilizing agents with an elastomeric middle block and end blocks of PS and PMMA, respectively, appears advantageous. One example is the use of polystyrene-Wocfc-poly(l,4-butadiene)-W0cfc-poly(methyl methacrylate)... 

Impact strength can be improved by other methods of modification—for example, by biaxial orientation of the material during or immediately after moulding. When transparent or translucent bottles are required in unplasticized poly(vinyl chloride) strength can be improved by including up to about 10% methyl-butadiene-styrene copolymers the bottles resulting retain a good finish. 

The thermoplastic polymers we studied included the polyolefins as polyethylene and polypropylene the polyacrylates and methacrylates as poly (methyl methacrylate) styrene polymers including both clear and impact types and acrylonitrile-butadiene-styrene (ABS) plastics. Fire retardance was evaluated by the D-635 procedure as described previously (19). 

The easiest technique to establish a polymer-photochromic molecule (PC) interaction is to dissolve the photochrome in a polymer solution from which the solvent is evaporated afterwards. DHI 7 has been incorporated by this technique into poly(methyl)- or poly( -butyl methacrylate), vinylidene chloride, acrylonitrile (Saran F), polycarbonate, and polystyrene-butadiene copolymer (Panarez). 

The DHI s may be solution cast with certain polymers. Examples of photochromic plastics prepared this way are poly (methyl methacrylate), poly (n-butyl methacrylate), copoly (vinylidene chloride-acrylonitrile) (e.g., SARAN F), polycarbonate, and polystyrene-butadiene (e.g., Panarez). 

Not surprisingly, as the science of macromolecules emerged, a large number of synthetic polymers went into commercial production for the first time. These include polystyrene, poly(methyl methacrylate), nylon 6.6, polyethylene, poly(vinyl chloride), styrene-butadiene rubber, silicones and polytetrafluoroethylene, as well as many other. From the 1950s onwards regular advances, too numerous to mention here, have continued to stimulate both scientific and industrial progress. 

Poly styrene-butadiene-styrene (Casting solvent Methyl Ethyl ketone) 2.020 2.87 19 Mw= 124000... 

Effects of additives in the matrix were observed by substituting for methyl methacrylate a poly (methyl methacrylate) homopolymer with a solution molecular weight of 950,000, a vinylidene fluoride copolymer (Pennwalt s Kynar 7201), and a methacrylate-butadiene-styrene impact modifier (Marbon s Blendex BTA IIIN). Concentrations were 2% on the total dispersion volume. The same additives were studied at the same volume concentration in the dispersed phase. Barium sulfate (Whittaker, Clark, and Daniels Barytes No. 91), a commonly used additive for radiopacity, was also studied in the dispersed phase. Responses were observed by the test methods described below. 

Polystyiene-polybutadiene Polybutadiene-poly(a-methyl styrene) Polybutadiene-poly(vinyl naphthalene) Polystyrene-polybutadlene-polystyrene Polybutadiene-polystyrene-polybutadiene Polystyrene-polyisoprene Pblystyrene-polyisoprene-polystyrene Polyia>prene-poly(vinyl-2-p dine) PofyiK>prene-poly(vinyl-4-pyridine) Polyisoprene-poly(methyl methacrylate) Polystyrene-poly(butadiene or ia>prene)-polystyrene Star polystyrene-polybutadiene with 4 branches Star polybutadiene-polystyrene with n branches Star polystyrene-polybutadiene with n branches Star polystyrene-polyisoprene with n brandies Polystyrene-polyisoprene-poly(vinyl-2-pyridine) Polystyrene-poly vinyl-2-pyridine) Polystyrene-poly(vinyl-4-pyridine) Poly(vinyl-2-pyridine)-poly(vinyl-4-pyridine)... 

---