Acrylonitrile- butadiene-styrene-poly

Acrylonitrile-butadiene-styrene-poly(vinyl chlo- Nitrile resins... [Pg.1010]

Acrylic-poly(vinyl chloride) alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy (ABS-PVC)... [Pg.1279]

PS-PMMA PS (poly( acrylonitrile-butadiene-styrene)) Poly(vinyl chloride) (Fayt et al. 1989c)... [Pg.359]

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... [Pg.958]

Synonyms ABS Acrylonitrile/butadiene/styrene polymer Acrylonitrile/ butadiene/styrene resin Butadiene/acrylonitrile/styrene copolymer Poly (acrylonitrile-butadiene-styrene) Poly (actylonitrile-co-butadiene-co-styrene)... [Pg.965]

Ronfaloy V Acrylonitrile-butadiene-styrene/Poly(vinyl chloride) DSM... [Pg.2332]

In preparing the compatible blend, the compatibilizer is reac-tively blended with PC and a blending partner in the presence of a transesterification catalyst. The blending partner can be a poly(ole-fin), styrene acrylonitrile copolymer, acrylonitrile-butadiene-styrene, poly (methyl methacrylate), or poly (styrene). Suitable transesterification catalysts include tetraphenyl phosphonium benzoate, tetraphenyl phosphonium acetate, and tetraphenyl phosphonium... [Pg.224]

Nazari T, Garmabi H. Effect of organoclays on the rheological and morphological properties of poly (acrylonitrile-butadiene-styrene)/poly(methyl methacrylate)/clay nanocomposites. Polym Compos 2012 33 1893-902. [Pg.35]

The ethyl cyanoacrylates are probably the most common of all the standard cyanoacrylates and the most widely used. The ethyl cyanoacrylates are best suited for bonding most plastics and elastomers to themselves and have excellent adhesion to polycarbonate, acrylonitrile butadiene styrene, poly(vinyl chloride) (PVC) and butyl rubber amongst many. [Pg.4]

Acrylonitrile-butadiene-styrene (ABS) copolymer Poly(vinylidene chloride)... [Pg.1011]

In the case of poly(vinyl chloride) plastics, the FWA is mixed dry with the PVC powder before processing or dissolved in the plasticising agent (see Vinyl polymers). Polystyrene, acrylonitrile—butadiene—styrene (ABS), and polyolefin granulates are powdered with FWA prior to extmsion (2,78) (see... [Pg.120]

Over 70% of the total volume of thermoplastics is accounted for by the commodity resins polyethylene, polypropylene, polystyrene, and poly(vinyl chloride) (PVC) (1) (see Olefin polymers Styrene plastics Vinyl polymers). They are made in a variety of grades and because of their low cost are the first choice for a variety of appHcations. Next in performance and in cost are acryhcs, ceUulosics, and acrylonitrile—butadiene—styrene (ABS) terpolymers (see... [Pg.135]

Automotive appHcations account for about 116,000 t of woddwide consumption aimuaHy, with appHcations for various components including headlamp assembHes, interior instmment panels, bumpers, etc. Many automotive appHcations use blends of polycarbonate with acrylonitrile—butadiene—styrene (ABS) or with poly(butylene terephthalate) (PBT) (see Acrylonitrile polymers). Both large and smaH appHances also account for large markets for polycarbonate. Consumption is about 54,000 t aimuaHy. Polycarbonate is attractive to use in light appHances, including houseware items and power tools, because of its heat resistance and good electrical properties, combined with superior impact resistance. [Pg.285]

Property Polystyrene (PS) Poly(styrene-i) (j-acrjio-nitrile ) (SAN) Glass-fil led PS High impact PS HIPS Acrylonitrile— butadiene—styrene terpolymer (ABS) Type 1 Type 2 Standard ABS Super ABS... [Pg.503]

As of 1992, the first specialty platable plastic, acrylonitrile—butadiene—styrene (ABS) terpolymer (see Acrylonitrile polymers, ABS resins), is used ia over 90% of POP appHcatioas. Other platable plastics iaclude poly(pheayleae ether) (see PoLYETPiERs), ayloa (see Polyamides), polysulfoae (see Polymers CONTAINING sulfur), polypropyleae, polycarboaate, pheaoHcs (see Pphenolic resins), polycarboaate—ABS alloys, polyesters (qv), foamed polystyreae (see Styrene plastics), and other foamed plastics (qv). [Pg.109]

Worldwide sales of poly(phenylene ether)—styrene resin alloys are 100,000—160,000 t/yr (47,96) aimual growth rates are ca 9%. Other resin, particularly acrylonitrile—butadiene—styrene (ABS) polymers and blends of these resins with PC resins, compete for similar appHcations. [Pg.271]

At one time butadiene-acrylonitrile copolymers (nitrile rubbers) were the most important impact modifiers. Today they have been largely replaced by acrylonitrile-butadiene-styrene (ABS) graft terpolymers, methacrylate-buta-diene-styrene (MBS) terpolymers, chlorinated polyethylene, EVA-PVC graft polymers and some poly acrylates. [Pg.341]

ISO 580 1990 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings -Oven test - Test method and basic specifications ISO 727-1 2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1 Metric series ISO 727-2 2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2 Inch-based series ISO 1163-1 1995 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1 Designation system and basis for specifications ISO 1163-2 1995 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2 Preparation of test specimens and determination of properties ISO 1265 1979 Plastics - Polyvinyl chloride resins - Determination of number of impurities and foreign particles... [Pg.322]

ISO 11468 1997 Plastics - Preparation of PVC pastes for test purposes - Dissolver method ISO 12092 2000 Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes underpressure - Resistance to internal pressure - Test method... [Pg.324]

Emulsion polymerization is used for 10-15% of global polymer production, including such industrially important polymers as poly(acrylonitrile-butadiene-styrene) (ABS), polystyrene, poly(methyl methacrylate), and poly (vinyl acetate) [196]. These are made from aqueous solutions with high concentrations of suspended solids. The important components have unsaturated carbon-carbon double bonds. Raman spectroscopy is well-suited to address these challenges, though the heterogeneity of the mixture sometimes presents challenges. New sample interfaces, such as WAI and transmission mode, that have shown promise in pharmaceutical suspensions are anticipated to help here also. [Pg.222]