Poly-2-methyl-1,4-butadiene rubber

Poly(ethylene terephtlhalate) Phenol-formaldehyde Polyimide Polyisobutylene Poly(methyl methacrylate), acrylic Poly-4-methylpentene-1 Polyoxymethylene polyformaldehyde, acetal Polypropylene Polyphenylene ether Polyphenylene oxide Poly(phenylene sulphide) Poly(phenylene sulphone) Polystyrene Polysulfone Polytetrafluoroethylene Polyurethane Poly(vinyl acetate) Poly(vinyl alcohol) Poly(vinyl butyral) Poly(vinyl chloride) Poly(vinylidene chloride) Poly(vinylidene fluoride) Poly(vinyl formal) Polyvinylcarbazole Styrene Acrylonitrile Styrene butadiene rubber Styrene-butadiene-styrene Urea-formaldehyde Unsaturated polyester... 

Figure 14.9 Effect of various impact modifiers (25wt%) on the notched Izod impact strength of recycled PET (as moulded and annealed at 150°C for 16 h) E-GMA, glycidyl-methacrylate-functionalized ethylene copolymer E-EA-GMA, ethylene-ethyl acrylate-glycidyl methacrylate (72/20/8) terpolymer E-EA, ethylene-ethyl acrylate EPR, ethylene propylene rubber MA-GPR, maleic anhydride grafted ethylene propylene rubber MBS, poly(methyl methacrylate)-g-poly(butadiene/styrene) BuA-C/S, poly(butyl acrylate-g-poly(methyl methacrylate) core/shell rubber. Data taken from Akkapeddi etal. [26]...

PS (polystyrene), PVC [poly(vinyl chloride)], PC (bisphenol A polycarbonate) PMMA [poly (methyl methacrylate)], PB (polybutadiene), SAN (styrene-acrylonitrile copolymer),NBR (acrylonitrile-butadiene rubber), PPE (polyphenylene ether), SBR (styrene-butadiene rubber)... 

Butadiene is used primarily in the production of synthetic rubbers, including styrene-butadiene rubber (SBR), polybutadiene nibber (BR), styrene-butadiene latex (SBL), chloroprene rubber (CR) and nitrile rubber (NR). Important plastics containing butadiene as a monomeric component are shock-resistant polystyrene, a two-phase system consisting of polystyrene and polybutadiene ABS polymers consisting of acrylonitrile, butadiene and styrene and a copolymer of methyl methacrylate, butadiene and styrene (MBS), which is used as a modifier for poly(vinyl chloride). It is also used as an intermediate in the production of chloroprene, adiponitrile and other basic petrochemicals. The worldwide use pattern for butadiene in 1981 was as follows (%) SBR + SBL, 56 BR, 22 CR, 6 NR, 4 ABS, 4 hexamethylenediamine, 4 other, 4. The use pattern for butadiene in the United States in 1995 was (%) SBR, 31 BR, 24 SBL, 13 CR, 4 ABS, 5 NR, 2 adiponitrile, 12 and other, 9 (Anon., 1996b). 

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... 

MC MDI MEKP MF MMA MPEG MPF NBR NDI NR OPET OPP OSA PA PAEK PAI PAN PB PBAN PBI PBN PBS PBT PC PCD PCT PCTFE PE PEC PEG PEI PEK PEN PES PET PF PFA PI PIBI PMDI PMMA PMP PO PP PPA PPC PPO PPS PPSU Methyl cellulose Methylene diphenylene diisocyanate Methyl ethyl ketone peroxide Melamine formaldehyde Methyl methacrylate Polyethylene glycol monomethyl ether Melamine-phenol-formaldehyde Nitrile butyl rubber Naphthalene diisocyanate Natural rubber Oriented polyethylene terephthalate Oriented polypropylene Olefin-modified styrene-acrylonitrile Polyamide Poly(aryl ether-ketone) Poly(amide-imide) Polyacrylonitrile Polybutylene Poly(butadiene-acrylonitrile) Polybenzimidazole Polybutylene naphthalate Poly(butadiene-styrene) Poly(butylene terephthalate) Polycarbonate Polycarbodiimide Poly(cyclohexylene-dimethylene terephthalate) Polychlorotrifluoroethylene Polyethylene Chlorinated polyethylene Poly(ethylene glycol) Poly(ether-imide) Poly(ether-ketone) Polyethylene naphthalate Polyether sulfone Polyethylene terephthalate Phenol-formaldehyde copolymer Perfluoroalkoxy resin Polyimide Poly(isobutylene), Butyl rubber Polymeric methylene diphenylene diisocyanate Poly(methyl methacrylate) Poly(methylpentene) Polyolefins Polypropylene Polyphthalamide Chlorinated polypropylene Poly(phenylene oxide) Poly(phenylene sulfide) Poly(phenylene sulfone)... 

FIG. 18.3 Activation energy of diffusion as a function of Tg for 21 different polymers from low to high temperatures, ( ) odd numbers (O) even numbers 1. Silicone rubber 2. Butadiene rubber 3. Hydropol (hydrogenated polybutadiene = amorphous polyethylene) 4. Styrene/butadiene rubber 5. Natural rubber 6. Butadiene/acrylonitrile rubber (80/20) 7. Butyl rubber 8. Ethylene/propylene rubber 9. Chloro-prene rubber (neoprene) 10. Poly(oxy methylene) 11. Butadiene/acrylonitrile rubber (60/40) 12. Polypropylene 13. Methyl rubber 14. Poly(viny[ acetate) 15. Nylon-11 16. Poly(ethyl methacrylate) 17. Polyethylene terephthalate) 18. Poly(vinyl chloride) 19. Polystyrene 20. Poly (bisphenol A carbonate) 21. Poly(2,6 dimethyl-p.phenylene oxide). 

Not surprisingly, as the science of macromolecules emerged, a large number of synthetic polymers went into commercial production for the first time. These include polystyrene, poly(methyl methacrylate), nylon 6.6, polyethylene, poly(vinyl chloride), styrene-butadiene rubber, silicones and polytetrafluoroethylene, as well as many other. From the 1950s onwards regular advances, too numerous to mention here, have continued to stimulate both scientific and industrial progress. 

The polymers of rubber plastics have unsaturated hydrocarbon chain structure, since they are polymerized from alkadienes. The general formula of poly(l,3-butadiene) or butadiene rubber (BR) and polyisoprene or natural rubber (NR) is drawn in Scheme 12.5, where X is hydrogen in BR and methyl group in synthetic polyisoprene or NR. The free radical mechanism of thermal decomposition starts by homolytic scission of the alkyl C-C bonds. Two primary macroradicals (4 and 5) are formed for which the rearrangement... 

Emulsion polymerization is the basis of many industrial processes, and the production volume of latex technologies is continually expanding—a consequence of the many environmental, economic, health, and safety benefits the process has over solvent-based processes. A wide range of products are synthesized by emulsion polymerization, including commodity polymers, such as polystyrene, poly(acrylates), poly (methyl methacrylate), neoprene or poly(chloroprene), poly(tetrafluoroethylene), and styrene-butadiene rubber (SBR). The applications include manufacture of coatings, paints, adhesives, synthetic leather, paper coatings, wet suits, natural rubber substitutes, supports for latex-based antibody diagnostic kits, etc. ... 

Abbreviations ABS, acrylonitrile-butadiene-styrene terpolymer PB, polybutadiene PC, polycarbonate PS, polystyrene PET, poly(ethylene terephthalate) PBT, poly(butylene terephthalate) SBR, styrene-butadiene rubber TEA, V-trifluoroacetylated polyamides PMMA, poly(methyl methacrylate) SAN, poly(styrene-acrylonitrile) SBS, poly(styrene-butadiene-styrene) PVA, poly(vinyl acetate) PVB, poly(vinyl butyral) PVC, poly(vinyl chloride) PDMS, poly(dimethyl siloxane) PE, polyethylene EVA, poly(ethylene-vinyl acetate) UHMWPE, ultra high molecular weight polyethylene PP, polypropylene. 

During World War I, poly (dimethyl butadiene) was manufactured under the name methyl rubber as a substitute for the natural rubber that the Central Axis Powers lacked. H-type poly(dimethyl butadiene) was obtained by letting the monomer stand for three months in ventilated metal drums. The white, solid crystalline material thus obtained by popcorn polymerization becomes... 

Figure 5.28 shows the unit cell of cw-1,4-poly (2-methyl butadiene), also known as c -polyisoprene or natural rubber. This second isomer of polyisoprene (see... 

During World War I, poly(dimethyl butadiene) (methyl rubber) was manufactured as a substitute for the natural rubber that the Central Powers lacked when the war ended, its production was curtailed because of its relatively poor properties and high cost. 2,3-Dimethyl butadiene is produced from acetone via pinnacol ... 

In spite of the great discoveries by Ziegler and Natta, most synthetic polymers are still made by free-radical reactions. Some of the important homopolymers are poly (vinyl chloride), poly (methyl methacrylate), polystyrene, and low-density polyethylene. Other important polymers made by free-radical reactions contain two or more monomers, for example, the styrene-butadiene rubbers, and the acrylonitrile-butadiene-styrene plastics. Most of these polymers are not stereoregular. A few that are represent the subject of this section. 

All the commercial PBT/PC and PET/PC blends also contain typically 10-20 wt% of an additional elastomeric impact modifier. The exact nature and the content of the impact modifier is kept proprietary and often forms the basis for a particular blend patent. Typically, core-shell rubbers such as poly(methyl methacrylate)-grafted butadiene-styrene rubber (MBS) or an all acrylic core-shell rubber such as poly (MMA-g-n-BuA) are used (Nakamura et al. 1975 Chung et al. 1985). ABS (with high polybutadiene content >50 %) or ASA rubber (>50 % aciylate rubber) have also been used. The presence of such a rubber component is definitely needed to obtain high notched Izod impact strengths (>500 J/m) in these blends. 

Absorption measiu-ements as a fiinction of temperature have been made over moderate temperature ranges for a variety of polymers, including vulcanized rubbers (91,119,120), poly(methyl methacrylate) (128), poly(4-methyl-l-pentene) (105), poly(acrylonitrile-butadiene-styrene) (ABS) (105), epoxy polymers (47,77),... 

---