Lacquers chlorinated rubber

Chem. Descrip. Industrial colorants based on thermoplastic acrylic resin Uses Colorant for in-plant and machine tinting of high-performance, nonaq., industrial, and maintenance coatings Features Rec. for acrylics, alkyds, cellulosic lacquers, chlorinated rubber, epoxies, polyesters, PU, vinyl lacquers Chroma-Kote [DMV Int I. Pharma]... 

Solvents have been classified on various arbitrary bases (1) boiling point, (2) evaporation rate, (3) polarity, (4) industrial applications, (5) chemical composition, (6) proton donor and proton acceptor relationships, and (7) behavior toward a dye, Magdala Red, Thus on the basis of industrial application one can classify solvents as those for (1) acctyl-ccliulosc, (2) pyroxylin, 13) resins and lubber, (4) cellulose ether, (5) chlorinated rubber, (6) synthetic resins, and (7) solvents and blending agents for cellulose ester lacquers. Solvents classified according to chemical composition are noted below. 

Trichloroethane is used primarily as a chemical intermediate in the production of 1,2-dichloroe-thene and vinylidine chloride. It is also used in adhesives, lacquers, coating formulations, for chlorinated rubbers and polyesters, as a solvent for fats, oils, waxes, resins, and in the production of Teflon tubing. 

Use Ingredient of polishes, special lubricants, and coatings lubricants for metals and in textile and molding industries in wax polishes as dye solvent plasticizer for laminated fiber products rubber hydrochloride chlorinated rubber and cable lacquers carbon paper and inks emolhent in cosmetic and pharmaceutical products lipsticks damp proofer for concrete flavoring. 

Chlorinated Polyethylene and Polypropylene. Totally chlorinated polyethylene and polypropylene have a chlorine content of 64 68%. Their properties largely correspond to those of chlorinated rubber (see Section 2.3). Chlorinated polypropylenes can be used for chemical-resistant and weather-resistant coatings. These binders are important in adhesion priming coats and heat-sealing lacquers for polypropylene foils. 

Toluene [108-88-3] is mainly used in cellulose nitrate lacquers in heat-curing paints based on urea-, melamine-, or phenol - formaldehyde resins in alkyd resin paints and in paints based on chlorinated rubber, polystyrene, polyacrylates, or poly(vinyl acetate). Mixtures of toluene with esters are used to dissolve vinyl chloride copolymers and postchlorinated poly(vinyl chloride) [14.265]. 

Diisopropyl ketone [565-50-0] (DIPK, 2,4-dimethyl-3-pentanone) is a high-boiling solvent used in the production of cellulose nitrate emulsion lacquers for coating leather, chlorinated rubber paints, and diluents for poly(vinyl chloride) organosols [14.267]. 

Chem. Descrip. Phthalate ester of tech, hydroabietyl alcohol Uses Tackifier for NR, SBR, NBR, CR, chlorinated rubbers, EVA, acrylics, polyamides for cements, hot-melt and pressure-sensitive adhesives, sealants, tapes, laminants, specialty nitrocellulose lacquers, printing inks Properties Pale solid sol. in esters, ketones, higher alcohols, coal tar, petrol, hydrocarbons dens. 1.05 kg/l soften, pt. 63 C acid no. 6 sapon. no. 129 ref. index 1.527 Cellosize ER-15M [Dow]... 

Chem. Descrip. Acetyltriethyl dtrate CAS 77-894 EINECS/ELINCS 201-066-5 Uses Plasticizer for more polar resins such as cellulosics, polyaciylates, PVAc, polyvinyl butyral, PVC, PVP, PVdC, chlorinated rubber lightfastness for lacquer formulations solvent in household, I I cleaners solvent, film-fonner, plasticizer for inks, adhesives, coatings, food pkg. adhesives/coatings/paper/paperboard/polymers Features Environmentally friendly... 

Chem. Descrip. Thermoplastic methacrylate resin Uses Binder for PVC finishing lacquers, coatings for plastic substrates with exc. alcohol resist., foil lacquers, printing inks Features Very low m.w. compat. with most PVC copolymers, NC, chlorinated rubber... 

Features Shortens setting time prevents streaking during painting and spraying of chlorinated rubber and coatings prevents chilling of nitrocellulose lacquers... 

Uses Plasticizer for polyvinyl and cellulosic resins inch NC lacquers and films, PVC flooring/plastisols, PVAc adhesives/sealants/caulks, acrylic coatings, chlorinated rubber, cellulose propionate, polyamide, castable PU organic intermediate film-former, plasticizer in cosmetics plasticizer in food-contact polymers in food-pkg. adhesives in paper/pa-perboard in contact with aq./fatty/dry foods solvent for adjuvants in food-contact crosslinked polyesters Features High-solvating... 

Uses Plasticizer for heat-seal applies., food wrappers/labels, pharmaceutical labels, foil lacquers, cellophane lacquers, nitrocellulose, eth-ylcellulose, chlorinated rubber, PVAc, PVC, food-contact polymers, printing Inks for paper/vinyl/textiles In food-pkg. adhesives In paper/ paperboard In contact with aq./fatty foods In cellophane for food pkg. Regulatory FDA 21 CFR 175.105,176,170,176.180,177.1200,178.3740 ManuUDistrib. Aldrich Alfa Chem Bayer ChemServIce Morflex P.A.T. Prods. Schwelzerhall Unitex... 

What is a lacquer It is a finish, clear or pigmented, which consists primarily of a hard linear polymer in solution. It dries by simple evaporation of solvents (lacquer dry). It is thus possible to make a lacquer from any soluble linear polymer, such as chlorinated rubber,... 

Uses Synthetic flavoring agent in foods and pharmaceuticals solvent for nitrocellulose and other cellulose derivs., natural and syn. resins, lacquers, plastics, printing inks, chlorinated rubber, heat-reactive phenolics, cosmetics, pharmaceuticals fragrance ingred. in perfumes organic synthesis lab reagent in recovery of acetic acid from dil. aq. sol ns. in cellophane for food pkg. 

Di(2-ethylhexyl) isophthalate (dioctyl iso-phthalate, DIOP) n. A primary plasticizer for PVC, most notable for low volatility and its resistance to marring by nitrocellulose lacquers, in addition to good general-purpose properties. It is also compatible with polyvinyl butyral, vinyl chloride-acetate copolymers, cellulosic resins, polystyrene, and chlorinated rubber. 

Diisodecyl adipate (DIDA) n. (-C2H4 COOCioH2i)2. a plasticizer for PVC in lower concentrations, e.g. up to 30 phr, at which it imparts low-temperature flexibility and resistance to lacquer marring. It is often used in combination with phthalate and phosphate plasticizers. DIDA is completely compatible with vinyl chloride-acetate copolymers, cellulose acetate-butyrate with high butyral content, cellulose nitrate, ethyl cellulose, and chlorinated rubber. In polystyrene, it may be used up to 25 phr. 

Chlorinated rnbber is a thermoplastic material notable for its high resistance to corrosive chemicals as well as to gasoline, air, moisture, and mineral oils. In chlorinated solvents, chlorinated rubber makes a useful vehicle for modified aUcyd resins formulated for air drying or low-bake enamels, as well as paints and lacquers. 

Plasticized, it produces a film highly impermeable to water and water vapor. Chlorinated rubber is chiefly used in the production of heat- and chemical-resistant paints, varnishes, and lacquers. Films, impregnating solutions, adhesives, and (with the addition of plasticizers) molding powders can also be made. 

Ethyl acetate is an important solvent for nitrocellulose lacquers, as an active solvent for adhesives, coatings, and inks. The resins used in the coatings and inks include ethyl cellulose, cellulose acetate butyrate, polymethylmethacrylate, polyvinyl acetate, polyvinyl butyral, polystyrene, and certain chlorinated rubbers. Other applications include manufacture of photographic film, coated papers, and adhesives. Ethyl acetate also is used as a process solvent in the pharmaceutical industry and as an extraction solvent. 

---