Film, photographic

The major features for advanced photo-systems relative to the base film are a small-size thrust cartridge and return inside the cartridge. These features require low core-set curl values and high mechanical strength. The cellulose triacetate (CTA), polycarbonate and PET materials currently used in the photographic industry are not able to satisfy these requirements. Some newly developed film materials, such as modified-PET and syndiotactic polystyrene, were also unable to satisfy such requirements. It is known that annealing films just below the Tg (BTA treatment) could reduce core-set curl tendencies. BTA treatments of 

PEN films provide specifications that meet the requirements. PEN shows high mechanical properties, low fogging during manufacture and storage, and excellent thermal dimensional stability, and can be made photo-reactive with the gelatin being reactive. Consequently, it is a good support material for advanced photosystems [55, 56], 

---

The image printer or recorder which prints the processed image on a photographic film or a transparent foil ... 

Polonium can be mixed or alloyed with beryllium to provide a source of neutrons. The element has been used in devices for eliminating static charges in textile mills, etc. however, beta sources are both more commonly used and less dangerous. It is also used on brushes for removing dust from photographic films. The polonium for these is carefully sealed and controlled, minimizing hazards to the user. 

Photocurable materials for photographic films contain pentaerythritol and dialkylamino and/or nitrile compounds, which have good adhesion and peelabihty of the layers, and produce clear transfer images (97,98). 

Based on estimates of resin sales for film and sheet. Includes estimate of captive use for photographic film and pressure-sensitive tape. Table 7. U.S. Manufacturers or Distributors of Film and Sheet ... 

Uses of gelatin are based on its combination of properties reversible gel-to-sol transition of aqueous solution viscosity of warm aqueous solutions abUity to act as a protective coUoid water permeabUity and insolubUity in cold water, but complete solubUity in hot water. It is also nutritious. These properties are utilized in the food, pharmaceutical, and photographic industries. In addition, gelatin forms strong, uniform, clear, moderately flexible coatings which readily sweU and absorb water and are ideal for the manufacture of photographic films and pharmaceutical capsules. 

Other Borohydrides. Potassium borohydride was formerly used in color reversal development of photographic film and was preferred over sodium borohydride because of its much lower hygroscopicity. Because other borohydrides are made from sodium borohydride, they are correspondingly more expensive. Generally their reducing properties are not sufficiently different to warrant the added cost. Zinc borohydride [17611-70-0] Zn(BH 2> however, has found many appHcations in stereoselective reductions. It is less basic than NaBH, but is not commercially available owing to poor thermal stabihty. It is usually prepared on site in an ether solvent. Zinc borohydride was initially appHed to stereoselective ketone reductions, especially in prostaglandin syntheses (36), and later to aldehydes, acid haHdes, and esters (37). 

Photopolymers and photothermoplasts are mentioned only in connection with holographic data storage (see Holography). The classical method of optical data storage in silver haUde films (photographic film, microfiche technique) is not discussed (see Photography). 

Compared to photographic films, BR is handicapped due to its very low light sensitivity. Also, as a possible material for disk-shaped digital optical information storage, BR does not offer an advantage over estabUshed magnetooptical materials ia spite of its higher line resolutioa, because ia both cases... 

Soft x-rays with wavelengths of 1—10 nm ate used for scanning x-ray microscopy. A zone plate is used to focus the x-ray beam to a diameter of a few tens of nanometers. This parameter fixes and limits the resolution. Holographic x-ray microscopy also utilizes soft x-rays with photoresist as detector. With a strong source of x-rays, eg, synchrotron, resolution is in the 5—20-nm range. Shadow projection x-ray microscopy is a commercially estabflshed method. The sample, a thin film or thin section, is placed very close to a point source of x-rays. The "shadow" is projected onto a detector, usually photographic film. The spot size is usually about 1 ]lni in diameter, hence the resolution cannot be better than that. 

---