High oxidation

Oxygen bonds covalently to many non-metals, and in many oxides, both with metals and non-metals, the other element achieves a high oxidation state, for example... 

This ability to bring out high oxidation states is exhibited also by fluorine it is to be attributed to the high electronegativities of oxygen and fluorine.)... 

An important reason for low coordination of iodide ions is that high coordination implies a high oxidation state of the central atom, which often (but not always) means high oxidising power— and this means oxidation of the easily oxidised iodide ligands. Thus the nonexistence of, for example, phosphorus(V) pentaiodide is to be explained by the oxidation of the iodide ligands and reduction of phosphorus to the -(-3 state, giving only PI3, not PI5. 

Chlorine reacts with most elements, both metals and non-metals except carbon, oxygen and nitrogen, forming chlorides. Sometimes the reaction is catalysed by a trace of water (such as in the case of copper and zinc). If the element attacked exhibits several oxidation states, chlorine, like fluorine, forms compounds of high oxidation state, for example iron forms iron(III) chloride and tin forms tin(IV) chloride. Phosphorus, however, forms first the trichloride, PCI3, and (if excess chlorine is present) the pentachloride PCI5. 

Bromine has a lower electron affinity and electrode potential than chlorine but is still a very reactive element. It combines violently with alkali metals and reacts spontaneously with phosphorus, arsenic and antimony. When heated it reacts with many other elements, including gold, but it does not attack platinum, and silver forms a protective film of silver bromide. Because of the strong oxidising properties, bromine, like fluorine and chlorine, tends to form compounds with the electropositive element in a high oxidation state. 

Halogens can act as ligands and are commonly found in complex ions the ability of fluorine to form stable complex ions with elements in high oxidation states has already been discussed (p. 316). However, the chlorides of silver, lead(Il) and mercury(l) are worthy of note. These chlorides are insoluble in water and used as a test for the metal, but all dissolve in concentrated hydrochloric acid when the complex chlorides are produced, i.e. [AgCl2] , [PbC ] and [Hg Clj]", in the latter case the mercury(I) chloride having also disproportionated. 

Vigorous oxidation leads to the formation of a carboxylic acid but a number of meth ods permit us to stop the oxidation at the intermediate aldehyde stage The reagents most commonly used for oxidizing alcohols are based on high oxidation state transition met als particularly chromium(VI)... 

Fluorine is the most electronegative element and thus can oxidize many other elements to their highest oxidation state. The small size of the fluorine atom facihtates the arrangement of a large number of fluorines around an atom of another element. These properties of high oxidation potential and small size allow the formation of many simple and complex fluorides in which the other elements are at their highest oxidation states. 

Oxides of nitrogen, NO, can also form. These are generally at low levels and too low an oxidation state to consider water scmbbing. A basic reagent picks up the NO2, but not the lower oxidation states the principal oxide is usually NO, not NO2. Generally, control of NO is achieved by control of the combustion process to minimize NO, ie, avoidance of high temperatures in combination with high oxidant concentrations, and if abatement is required, various approaches specific to NO have been employed. Examples are NH injection and catalytic abatement (43). 

The titanium oxide film consists of mtile or anatase (31) and is typically 250-A thick. It is insoluble, repairable, and nonporous in many chemical media and provides excellent corrosion resistance. The oxide is fully stable in aqueous environments over a range of pH, from highly oxidizing to mildly reducing. However, when this oxide film is broken, the corrosion rate is very rapid. Usually the presence of a small amount of water is sufficient to repair the damaged oxide film. In a seawater solution, this film is maintained in the passive region from ca 0.2 to 10 V versus the saturated calomel electrode (32,33). 

Aerobic, Anaerobic, and Combined Systems. The vast majority of in situ bioremediations ate conducted under aerobic conditions because most organics can be degraded aerobically and more rapidly than under anaerobic conditions. Some synthetic chemicals are highly resistant to aerobic biodegradation, such as highly oxidized, chlorinated hydrocarbons and polynuclear aromatic hydrocarbons (PAHs). Examples of such compounds are tetrachloroethylene, TCE, benzo(a)pyrene [50-32-8] PCBs, and pesticides. 

Barium sulfide solutions undergo slow oxidation in air, forming elemental sulfur and a family of oxidized sulfur species including the sulfite, thiosulfate, polythionates, and sulfate. The elemental sulfur is retained in the dissolved bquor in the form of polysulfide ions, which are responsible for the yellow color of most BaS solutions. Some of the mote highly oxidized sulfur species also enter the solution. Sulfur compound formation should be minimized to prevent the compounds made from BaS, such as barium carbonate, from becoming contaminated with sulfur. 

This reaction is cataly2ed in solution by complexes of tungsten, molybdenum, or rhenium in high oxidation states, eg, Re ". Examples of active catalysts are... 

The performance of many metal-ion catalysts can be enhanced by doping with cesium compounds. This is a result both of the low ionization potential of cesium and its abiUty to stabilize high oxidation states of transition-metal oxo anions (50). Catalyst doping is one of the principal commercial uses of cesium. Cesium is a more powerflil oxidant than potassium, which it can replace. The amount of replacement is often a matter of economic benefit. Cesium-doped catalysts are used for the production of styrene monomer from ethyl benzene at metal oxide contacts or from toluene and methanol as Cs-exchanged zeofltes ethylene oxide ammonoxidation, acrolein (methacrolein) acryflc acid (methacrylic acid) methyl methacrylate monomer methanol phthahc anhydride anthraquinone various olefins chlorinations in low pressure ammonia synthesis and in the conversion of SO2 to SO in sulfuric acid production. 

Some hypochlorites, either as solutions or soflds, are much more stable than hypochlorous acid, and because of thek high oxidation potential and ready hydrolysis to the parent acid, find wide use in bleaching and sanitizing appHcations. One of the novel uses of hypochlorites was for disinfection of ApoUo Eleven on its return from the moon (136). 

Smectite [12199-37-0] from an oxidized outcrop is stained light blue by a dilute solution of benzidine hydrochloride. The color does not arise from smectite specifically, but from reaction of a high oxidation state of elements such as Fe " and Mn " (46)46. 

F). Alkalies have little effect on this alloy, but it will not stand up against very highly oxidizing or reducing environments. 

Molybdenum High melting point less dense than tungsten or tantalum moderately ductile at room temperature Extremely high oxidation rate (volatile oxide)... 

Due to high oxidation ability of Ce(IV), special attention is to be paid to retaining its valence state unchanged in the dissolution process of the analyzed samples which contain microquantities of the detenuined component. 

---