Hazardous substances hazard types

Rank Substance name Type of waste (S = solid, F = liquid, G = gas) Biotechnological treatment with formation of nonhazardous or less hazardous products... 

NIOSH conducts research aimed at improving health and safety in the workplace. A major goal of NIOSH research is to provide the scientific basis for setting exposure standards. The Registry of toxic ects of chemical substances (RTECS), is published and regularly updated by NIOSH. RTECS lists all known toxic substances, the types of toxicity seen at different concentrations, and current US regulatory standards. At the request of an employer, employee or employee representative, NIOSH will conduct a site investigation into possible health effects from exposure to hazardous substances. 

Ventilation Ventilation is useful for airborne contaminants. There are two types of ventilation for controlling hazardous substances. One type of ventilation is general ventilation. The second type is local exhaust ventilation. Chapter 25 gives details on ventilation. 

Table 28-1 indicates the four main types of hazardous material, with examples of substances of each type. Not presented in Table 28-1 are radioactive materials, which are considered as a separate type of hazardous waste (5). 

The technical differences between site problems at RCRA facilities and CERCLA sites sometimes may be difficult to distinguish, owing to similarities in present or past uses of the site, in hydrogeologic setting, and/or in the types of substances disposed, spilled, or otherwise managed at the site. Consequently, many technical aspects of the study and remediation of releases of hazardous wastes and constituents from RCRA facilities often will closely parallel those at Superfund sites, and cleanups under both statutes must achieve similar goals for protection of public health and the environment. Additionally, activities which would be termed removal actions or expedited response actions under CERCLA may be undertaken by owners and operators under RCRA. In the RCRA context, such actions are termed interim measures, as will be discussed in subsequent chapters. 

Container - Provide the corresponding code for the type of container in which the reportable substance is stored. If you have a container other than the ones listed on the Code Sheet, you should use Code 34, "other". If a hazardous substance is present in different contacts, provide an individual report for each type of storage container, giving the corresponding codes. For example, if a solvent is stored in th 55-gallon steel drums and glass bottles, two separate reports should be made for that solvent. 

Medically evaluating, training, qualifying, and fit-testing workers for specific respirator types, checking 29 CFR 1910, Subpart Z, Toxic and Hazardous Substances, for any special respiratory protection requirements (e.g., for asbestos, lead, or cadmium) [3]... 

The new hand protection standard resulted from OSHA s belief that many hand injuries result from not wearing hand protection or wearing protection for the wrong type of hazards. Employers should evaluate and provide hand protection when there are hazards to hands from absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, and harmful temperature extremes. 

In 29 CER 1910.120 (a)(3) it is stated that responses to incidental releases of hazardous substances where the substance can be absorbed, neutralized, or otherwise controlled at the time of release by employees in the immediate release area, or by maintenance personnel, are not considered to be emergency responses in the scope of the standard (HAZWOPER). The term incidental is the key term. Workers need to be trained as to what type of situations would be considered incidental. In general, if the employees actions to clean or control the release do not and likely would not put them in jeopardy (from a safety and health viewpoint), the act would be considered incidental. 

This is a situation where a plant appears to be operating successfully, without a major human error problem. However, management are interested in assessing the systems in the plant from the point of view of minimizing the error potential. This type of exercise is particularly relevant for plants dealing with substances or processes with high hazard potential, for example, in terms of... 

Since 1970 tlie field of healtli risk assessment Itas received widespread attention witliin both tlie scientific and regulatoiy committees. It has also attracted tlie attention of the public. Properly conducted risk assessments have received fairly broad acceptance, in part because they put into perspective the terms to. ic, Itazard, and risk. Toxicity is an inlierent property of all substances. It states tliat all chemical and physical agents can produce adverse healtli effects at some dose or under specific exposure conditions. In contrast, exposure to a chemical tliat lias tlie capacity to produce a particular type of adverse effect, represents a health hazard. Risk, however, is tlie probability or likelihood tliat an adverse outcome will occur in a person or a group tliat is exposed to a particular concentration or dose of the hazardous agent. Tlierefore, risk can be generally a function of exposure and dose. Consequently, healtli risk assessment is defined as tlie process or procedure used to estimate tlie likelihood that... 

Type of actual products manufactured on the site, and information about specifically toxic or hazardous substances handled, mentioning the way they are manufactured (in dedicated facilities or on a campaign basis). 

In Part Two will be found a presentation of NFPA reactivity codes (when these are different from 0). The table below gives twenty substances which have the different NFPA degrees. These will later be used as examples when comparing the different types of classification of instability hazard. 

In 1980, the U.S. Congress enacted the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), the first comprehensive federal law addressing the protection of the environment from the threat of hazardous substances. The primary goal of CERCLA is to establish an organized cost-effective mechanism for response to abandoned or uncontrolled hazardous waste sites that pose a serious threat to human health and the environment.8 9 To accomplish this goal, two types of response capabilities are mandated by CERCLA13 ... 

To reduce the accidental spread of hazardous substances by workers from a contaminated area to a clean area, zones should be delineated on the site where different types of operations will occur, and the flow of personnel among the zones should be controlled. The establishment of work zones will help ensure that personnel are properly protected against the hazards present where they are working, that work activities and contamination are confined to the appropriate areas, and that personnel can be located and evacuated in an emergency. 

The actual movement of a specific deep-well-injected hazardous substance depends on the types of processes that act on the waste and on the ways in which different processes interact. Figure 20.3 shows the expected change in concentration over time of a deep-well-injected organic compound in an observation well at an unspecified distance from the original point of injection. 

An application of transport and compartment-type models to hazard analysis is described in the paper by Honeycutt and Ballantine (19). The compound CGA-72662 running off from agricultural areas into surface waters was modeled in order to set safe application procedures consistent with the protection of aquatic environments. Patterson, et al (2 0) have adapted the UTM model to a software package that is generally applicable to fate assessments of toxic substances in air, water, soil and biota. Their work, now in working draft form, is being used by Dr. William Wood and Dr. Joan Lefler in the Office of Toxic Substances of the U.S. Environmental Protection Agency. 

Where two or more elements or compounds are involved in a reactive hazard, and an intermediate or product of reaction is identifiable as being responsible for the hazard, both reacting substances are normally cross-referred to the identified product. The well-known reaction of ammonia and iodine to give explosive nitrogentriodide-ammonia is an example of this type. The two entries Ammonia Halogens Iodine Ammonia... 

If you are exposed to a hazardous substance such as acrylonitrile, several factors will determine whether harmful health effects will occur and what the type and severity of those health effects will be. These factors include the dose (how much), the duration (how long), the route or pathway by which you are exposed (breathing, eating, drinking, or skin contact), the other chemicals to which you are exposed, and your individual characteristics such as age, sex, nutritional status, family traits, life style, and state of health. 

---