Glass coated

Fig. X-4. Water contact angle of titania-coated glass after treatment with trimethyloc-tadecylammonium chloride as a function of the number of coating treatments with 1.1% polydibutyl titanate. (From Ref. 51.)...

When surfactant-coated glass fibers are included to improve product flexibility and reduce thermal expansion, these semibatch processes are termed reinforced reaction injection mol ding (RRIM). 

Asphalt-coated glass fiber venting base sheet with fine mineral surfacing on the top side and coarse granules on the bottom side perforated/embossed or not. The coarse granules provide an open, porous channel in the horizontal plane (5,11). 

ASTM D4601, Asphalt-Coated Glass Fiber Base Sheet Used in Roofing, ASTM, Philadelphia, Pa. 

Phenohc/adhesives adhesives / sealants / gaskets abrasives and break pad binders printed circuit boards stmctural composites /laminates Metal/glass binders metal oxide binders retroreflective coatings glass optical coatings Hard copy printing inks toners... 

The changes in the optical absorption spectra of conducting polymers can be monitored using optoelectrochemical techniques. The optical spectmm of a thin polymer film, mounted on a transparent electrode, such as indium tin oxide (ITO) coated glass, is recorded. The cell is fitted with a counter and reference electrode so that the potential at the polymer-coated electrode can be controlled electrochemically. The absorption spectmm is recorded as a function of electrode potential, and the evolution of the polymer s band stmcture can be observed as it changes from insulating to conducting (11). 

Titanium Dioxide. The recrystallization of titanium dioxide in a cover-coat glass is very important to the development of thin, highly opaque finish coats. Titania, Ti02, is the primary opacifying agent for white finish coats. Two polymorphic forms of titania, anatase and mtile, may be present in... 

Figure 4 Data plus Herstions 1,2, and 7 in regression analysis (data fit) for the optical coating glass/TI02/Ag/TI02-...

Mattauch-Herzog geometry, which simultaneously focuses all resolved masses onto one plane, allowing the integrating properties of an ion-sensitive emulsion to be used as the detector. Although electrical detection with an electron multiplier can be applied, the ion-sensitive emulsion-coated glass photographic plate is the most common method of detection and will be described in this article. 

The first commercial applications of polypyromellitimides were as wire enamels, as insulating varnishes and for coating glass-cloth (Pyre.ML, Du Pont). In film form (Kapton) many of the outstanding properties of the polymer may be more fully utilised. These include excellent electrical properties, solvent resistance, flame resistance, outstanding abrasion resistance and exceptional heat resistance. After 1000 hours exposure to air at 300°C the polymer retained 90% of its tensile strength. 

If the rf source is applied to the analysis of conducting bulk samples its figures of merit are very similar to those of the dc source [4.208]. This is also shown by comparative depth-profile analyses of commercial coatings an steel [4.209, 4.210]. The capability of the rf source is, however, unsurpassed in the analysis of poorly or nonconducting materials, e.g. anodic alumina films [4.211], chemical vapor deposition (CVD)-coated tool steels [4.212], composite materials such as ceramic coated steel [4.213], coated glass surfaces [4.214], and polymer coatings [4.209, 4.215, 4.216]. These coatings are used for automotive body parts and consist of a number of distinct polymer layers on a metallic substrate. The total thickness of the paint layers is typically more than 100 pm. An example of a quantitative depth profile on prepainted metal-coated steel is shown as in Fig. 4.39. 

Hydrazine in air Lab method using sampling either onto acid-coated glass-fibre filters followed by solvent desorption or into specially constructed impingers. Linal analysis by derivatization and high performance liquid chromatography 86... 

Two processes, referred to as sputtered and pyrolitic, were developed to produce large volumes of quality, low-e coated glass. Pyrolitic coatings are incorporated into float glass production and tend to be more durable. Sputtered systems use a stand-alone vacuum deposition process to produce coatings that are have lower emissivities but that are softer and need more protection than pyrolitic coatings. 

Rigid toom core sandwich with rigid plastics skin vinyl-coated glass Insect screening... 

Both dynein and MAP2 interact with microtubules at the same binding sites, namely, the C termini of a- and p-tubulin. Also, MAP2 inhibits the microtubule-activated ATPase of dynein and prevents microtubule gliding on dynein-coated glass coverslips. Thus, MAP2 and other fibrous MAPs may be regulators of microtubule-based motility in vivo (Paschal et al., 1989). 

Dimethyltin dichloride is used in the glass industry as an alternative to stannic chloride for coating glass with a thin film of stannic oxide 562). The dialkyltin compound vapor is brought into contact with the glass surface at temperatures of 500-600°C, where decomposition and oxidation occurs. 

The mono- and disubstituted organotins considered here are used as stabilizers in PVC or as catalysts for the production of electrodeposited coatings (mainly in motor vehicle primers), sihcone rubbers, esterification and powder coatings, and polyurethanes, as well as for coating glass. 

FIG. 14 Measurements on monolayers and LB films of CdSe nanoparticles of narrow size distribution (a) II-A isotherms for Langmuir monolayers of CdSe nanoparticles of diameter 2.5 run (curve a), 3.0 mn (curve b), 3.6 mn (curve c), 4.3 mn (curve d), and 5.3 mn (curve e). The area per nanoparticle was determined by dividing the trough area by the estimated number of particles deposited on the surface, (b) Absorbance and photoluminescence spectra of the nanoparticles in solution (A, B) and in monolayers on sulfonated polystyrene-coated glass sbdes (C. D). The nanoparticle diameters are 2.5 nm (curves labeled a), 3.6 nm (curves labeled b), and 5.3 nm (curves labeled c). The excitation wavelengths are (a) 430 nm, (b) 490 nm, and (c) 540 nm. (Reproduced with permission from Ref. 158. Copyright 1994 American Chemical Society.)... 

The photoelectrochemical properties of CdS nanoparticles formed in LB films of cadmium arachidate on ITO glass (indium tin oxide-coated glass) were investigated [188]. The CdS particles were formed by exposure to H2S gas, and then the cadmium arachidate structure was regenerated by exposing the gas-treated films with aqueous solutions of CdCL. Gassing/immersion cycling increased the particle size from 2.3 0.7 nm after one cycle to 9.8 2.4 nm after five cycles. The 9.8-nm particles showed UV-visible ab-... 

Because a wide variety of TLC plates are available commercially, the most appropriate type of plate should be chosen considering several important factors such as the efficiency of the resolution of the lipid species of interest, cost of the plate, the size of the sample to be applied on the plate, and commercial availability of PTLC, depending on the amount of material to be separated. Silica plates are most commonly used for the analysis of hpids. If a large amount of sample material is needed to be separated, plates with a thicker layer of silica should be used. Commercial PTLC plates are available, and thicknesses of 200 to 2000 pm and 250 to 1000 pm are most commonly used in PTLC. Silica-coated glass plates can be of various sizes ... 

---