Barrier glass-coating

Barrier layer for Sn02 films for glass coating.P l... 

Plasma processing technologies ate used for surface treatments and coatings for plastics, elastomers, glasses, metals, ceramics, etc. Such treatments provide better wear characteristics, thermal stability, color, controlled electrical properties, lubricity, abrasion resistance, barrier properties, adhesion promotion, wettability, blood compatibility, and controlled light transmissivity. 

Waterproof. Waterproofing barrier systems may be either hot- or cold-appHed. The hot-appHed generaUy involve a bituminous material such as asphalt used in conjunction with a reinforcing fabric such as roofing felt, cotton, or glass cloth. Cold-appHed can be bituminous or elastomeric materials either in Hquid or sheet form, with or without fabric reinforcement. Liquid elastomeric treatments include neoprene, polyurethanes, and blends of these or epoxies with bituminous materials. Among the commonly used precured elastomeric sheet materials are neoprene, polyisobutylene, EPDM mbber, and plasticized PVC. Polyethylene and PVC films and nonwoven plastic or glass fabric coated with bituminous materials also find use (78). Because these... 

Recent applications of e-beam and HF-plasma SNMS have been published in the following areas aerosol particles [3.77], X-ray mirrors [3.78, 3.79], ceramics and hard coatings [3.80-3.84], glasses [3.85], interface reactions [3.86], ion implantations [3.87], molecular beam epitaxy (MBE) layers [3.88], multilayer systems [3.89], ohmic contacts [3.90], organic additives [3.91], perovskite-type and superconducting layers [3.92], steel [3.93, 3.94], surface deposition [3.95], sub-surface diffusion [3.96], sensors [3.97-3.99], soil [3.100], and thermal barrier coatings [3.101]. 

Another available product has two faces of aluminum foil over a core of glass scrim webbing it is coated with asphalt. The membrane is 0.012 in. thick. This material has not been tested as a barrier against diffusive flow of radon, but its performance should be similar to that of other foil-faced products. Seams are sealed with aluminum tape. 

The adhesive was developed for application to seal food containers with alumina foils and to seal glass plates. In this case, the vinyl polymerization step can be carried out by UV light radiation through the already mounted glass plates with a photoactive radical initiator to cure the viscous adhesive material. Another application of this material is the development of diffusion barrier containing protective coatings on medieval stained glasses (31). 

The flame retardant mechanism for phosphorus compounds varies with the phosphorus compound, the polymer and the combustion conditions (5). For example, some phosphorus compounds decompose to phosphoric acids and polyphosphates. A viscous surface glass forms and shields the polymer from the flame. If the phosphoric acid reacts with the polymer, e.g., to form a phosphate ester with subsequent decomposition, a dense surface char may form. These coatings serve as a physical barrier to heat transfer from the flame to the polymer and to diffusion of gases in other words, fuel (the polymer) is isolated from heat and oxygen. 

---