Sulfonates amine alkylation

The electrophilic character of sulfur dioxide does not only enable addition to reactive nucleophiles, but also to electrons forming sulfur dioxide radical anions which possess the requirements of a captodative" stabilization (equation 83). This electron transfer occurs electrochemically or chemically under Leuckart-Wallach conditions (formic acid/tertiary amine - , by reduction of sulfur dioxide with l-benzyl-1,4-dihydronicotinamide or with Rongalite The radical anion behaves as an efficient nucleophile and affords the generation of sulfones with alkyl halides " and Michael-acceptor olefins (equations 84 and 85). 

Ethoxylated methylcarboxylates Propoxyethoxy glyceryl sulfonate Alkylpropoxyethoxy sulfate as surfactant, xanthan, and a copolymer of acrylamide and sodium 2-acrylamido-2-methylpropane sulfonate Carboxymethylated ethoxylated surfactants (CME) Polyethylene oxide (PEG) as a sacrificial adsorbate Polyethylene glycols, propoxylated/ethoxylated alkyl sulfates Mixtures of sulfonates and nonionic alcohols Combination of lignosulfonates and fatty amines Alkyl xylene sulfonates, polyethoxylated alkyl phenols, octaethylene glycol mono n-decyl ether, and tetradecyl trimethyl ammonium chloride Anionic sodium dodecyl sulfate (SDS), cationic tetradecyl trimethyl ammonium chloride (TTAC), nonionic pentadecylethoxylated nonylphenol (NP-15), and nonionic octaethylene glycol N-dodecyl ether Dimethylalkylamine oxides as cosurfactants and viscosifiers (N-Dodecyl)trimethylammonium bromide Petrochemical sulfonate and propane sulfonate of an ethoxylated alcohol or phenol Petrochemical sulfonate and a-olefin sulfonate... 

Primary alkyl phenols have been prepared by the reduction of acyl phenols 1 by the demethylation of the corresponding ethers 12 by the diazotization of the corresponding amines 3 and by the alkali fusion of sulfonates.4 Alkyl resorcinols have been prepared by the reduction of acyl resorcinols.1 5 6 Alkyl chlororesorcinols have been prepared from the corresponding acyl chlororesorcinols by reduction.7... 

When chromatographic resolution of species based on modifications located at the protein surface is desired, it may be advisable to use conditions that favor retention of native conformation.17 Here, the standard acidic conditions described in the preceding text may be inappropriate, and mobile phases buffered near neutrality may be required. Buffers based on ammonium acetate, ammonium bicarbonate, and triethylammonium phosphate may prove more useful in resolving polypeptide variants with differing posttranslational modifications, amino acid substitutions, or oxidation and deamidation products. The addition of more hydro-phobic ion-pairing agents may be needed to obtain polypeptide retention, and a variety of alkyl sulfonates and alkyl amines have been described for specific applications.17... 

The raw materials used to synthesize organic dyes are commonly referred to as dye intermediates. Largely, they are derivatives of aromatic compounds obtained from coal tar mixtures. The majority of these derivatives are benzene, naphthalene, and anthracene based compounds. This section provides an overview of the chemical reactions used to prepare the key intermediates employed in dye synthesis. In this regard, emphasis is placed on halogenated, aminated, hydroxy-lated, sulfonated, and alkylated derivatives of benzene, naphthalene, and anthraquinone. 

Aryl amine intermediates for azo and triphenylmethane dyes, as well as a number of vat dye (anthraquinone) intermediates, are made from compounds such as benzene, alkyl benzenes (toluene and higher homologues), phenol and naphthalene. A limited number of reactions are used to produce the most important dye intermediates, including nitration, reduction, halogenation, sulfonation, /V-alkylation, /V-acylation and alkali fusion33,34. 

The vast majority of ILs are usually prepared by simple N- or T-alkylation of amines, heteroaromatics, and phosphines, often employing alkyl halides or alkyl sulfonates as alkylating agents, followed by association with metal halides or anion metathesis (Scheme 1). 

Chemical interactions The chemical contribution may result from interactions such as covalent or complex bond formation between the surfactants and the surface sites. Surfactants such as fatty acids, alkyl sulfates, alkyl sulfonates, amines and alkylhydroxa-mates have been proposed to adsorb by means of chemical interactions on a variety of particles. In addition, surfactants containing hydroxyl, phenolic, carboxylic and amine groups can hydrogen-bond with the surface sites. Infrared spectroscopy has been used to understand the chemisorption of surfactants at the surface, by examining the shift in the characteristic peaks of the surfactants upon adsorption. 

The use of dry aryldiazonium salts of naphthalene-1-sulfonic [70], naphthalene-1,5-disulfonic [70], ZnCl2 complex [70], hexafluorophosphoric or tetrafluoroboric acid [61] in non-aqueous medium under as mild as possible reaction conditions is substantial to reach higher yields of biaryls. An alternative method for non-aqueous GBH reaction is the aprotic diazotation of aromatic amines with alkyl nitrites such as butyl or pentyl nitrite with subsequent arylation of aromatic compound, as demonstrated by Cadogan [71,72]. This method is realized by simple heating the mixture of aromatic amine, alkyl nitrite and liquid arene at an elevated temperature. When a mixture of 3-aminopyridine (46), benzene and pentyl nitrite is heated at reflux, 3-phenylpyridine (47) is obtained with a 55% yield [71], Scheme 16. 

Alkanolamides Alkyl sulfonates Amine oxides Amphoteric surfactants Anionic surfactants Cocoamidopropyl betaine Betaine derivatives Amido guanidines Disulfonates... 

Introduction of the NH group ortho to the sulfone bridge of the poly(ethersulfone) was performed via a method developed by Guiver et al. [73,74]. The poly(ether sulfone amine) was then stepwise alkylated to the secondary and the tertiary polymeric amine by sequential addition of n-BuLi and CH3I [43]. 

Chem. Descrip. Blend of lautyl sulfates, alkyl aryl sulfonates, amine condensates, coupling and rinsing aids... 

Three generations of latices as characterized by the type of surfactant used in manufacture have been defined (53). The first generation includes latices made with conventional (/) anionic surfactants like fatty acid soaps, alkyl carboxylates, alkyl sulfates, and alkyl sulfonates (54) (2) nonionic surfactants like poly(ethylene oxide) or poly(vinyl alcohol) used to improve freeze—thaw and shear stabiUty and (J) cationic surfactants like amines, nitriles, and other nitrogen bases, rarely used because of incompatibiUty problems. Portiand cement latex modifiers are one example where cationic surfactants are used. Anionic surfactants yield smaller particles than nonionic surfactants (55). Often a combination of anionic surfactants or anionic and nonionic surfactants are used to provide improved stabiUty. The stabilizing abiUty of anionic fatty acid soaps diminishes at lower pH as the soaps revert to their acids. First-generation latices also suffer from the presence of soap on the polymer particles at the end of the polymerization. Steam and vacuum stripping methods are often used to remove the soap and unreacted monomer from the final product (56). 

Sulfonic acids are prone to reduction with iodine [7553-56-2] in the presence of triphenylphosphine [603-35-0] to produce the corresponding iodides. This type of reduction is also facile with alkyl sulfonates (16). Aromatic sulfonic acids may also be reduced electrochemicaHy to give the parent arene. However, sulfonic acids, when reduced with iodine and phosphoms [7723-14-0] produce thiols (qv). Amination of sulfonates has also been reported, in which the carbon—sulfur bond is cleaved (17). Ortho-Hthiation of sulfonic acid lithium salts has proven to be a useful technique for organic syntheses, but has Httie commercial importance. Optically active sulfonates have been used in asymmetric syntheses to selectively O-alkylate alcohols and phenols, typically on a laboratory scale. Aromatic sulfonates are cleaved, ie, desulfonated, by uv radiation to give the parent aromatic compound and a coupling product of the aromatic compound, as shown, where Ar represents an aryl group (18). 

SuIfona.tlon, Sulfonation is a common reaction with dialkyl sulfates, either by slow decomposition on heating with the release of SO or by attack at the sulfur end of the O—S bond (63). Reaction products are usually the dimethyl ether, methanol, sulfonic acid, and methyl sulfonates, corresponding to both routes. Reactive aromatics are commonly those with higher reactivity to electrophilic substitution at temperatures > 100° C. Tn phenylamine, diphenylmethylamine, anisole, and diphenyl ether exhibit ring sulfonation at 150—160°C, 140°C, 155—160°C, and 180—190°C, respectively, but diphenyl ketone and benzyl methyl ether do not react up to 190°C. Diphenyl amine methylates and then sulfonates. Catalysis of sulfonation of anthraquinone by dimethyl sulfate occurs with thaHium(III) oxide or mercury(II) oxide at 170°C. Alkyl interchange also gives sulfation. 

Manufacturing procedures for producing dye dispersions are generally not disclosed. The principal dispersants in use include long-chain alkyl sulfates, alkaryl sulfonates, fatty amine—ethylene oxide condensates, fatty alcohol—ethylene oxide condensates, naphthalene—formaldehyde—sulfuric acid condensates, and the lignin sulfonic acids. 

The kinetics of formation and hydrolysis of /-C H OCl have been investigated (262). The chemistry of alkyl hypochlorites, /-C H OCl in particular, has been extensively explored (247). /-Butyl hypochlorite reacts with a variety of olefins via a photoinduced radical chain process to give good yields of aUyflc chlorides (263). Steroid alcohols can be oxidized and chlorinated with /-C H OCl to give good yields of ketosteroids and chlorosteroids (264) (see Steroids). /-Butyl hypochlorite is a more satisfactory reagent than HOCl for /V-chlorination of amines (265). Sulfides are oxidized in excellent yields to sulfoxides without concomitant formation of sulfones (266). 2-Amino-1, 4-quinones are rapidly chlorinated at room temperature chlorination occurs specifically at the position adjacent to the amino group (267). Anhydropenicillin is converted almost quantitatively to its 6-methoxy derivative by /-C H OCl in methanol (268). Reaction of unsaturated hydroperoxides with /-C H OCl provides monocyclic and bicycHc chloroalkyl 1,2-dioxolanes. 

Cl Disperse Blue 87 (107) and related dyestuffs are also prepared from l-oxo-3-imino-4,7-diamino-5,6-phthaloyhsoiQdoline [13418-50-3] (111) by alkylation with corresponding alkyl haUdes (122), sulfonic esters (123), or alkyl amines (124), ie, X of RX = halogen, -toluenesulfonyloxy, or NH2. 

---