Sulfate, dimethyl

Boifing point 188 °C (with decomposition) Solubility in water g/100 g=2.8 at 18 °C Density of vapor (air= 1) 4.35 Elash point °C 83 Ignition temperatures °C 470 Explosive fimits vol.%  

Heat of vaporization at 25 °C =92.1 kcal/kg Specific gravity at 15 °C 1.33 (liquid) 

4 Sulfonating Agents and Derivatives Based on Suifuric Acid 

Dimethyl sulfate is manufactured by sulfonation of dimethyl ether. Liquid sulfur trioxide is fed by a metering pump to a reactor to which methanol is added through a catalytic converter as dimethyl ether. 

Crude DMS is further treated in a converter wherein the reaction is completed. This is then fed to a series of distillation kettles operating under vacuum. The vapors are condensed and the product DMS is transferred to day tanks wherein the quality is checked and sent to storage by gravity. The product is then filled into drums for 

---

The most stable protected alcohol derivatives are the methyl ethers. These are often employed in carbohydrate chemistry and can be made with dimethyl sulfate in the presence of aqueous sodium or barium hydroxides in DMF or DMSO. Simple ethers may be cleaved by treatment with BCI3 or BBr, but generally methyl ethers are too stable to be used for routine protection of alcohols. They are more useful as volatile derivatives in gas-chromatographic and mass-spectrometric analyses. So the most labile (trimethylsilyl ether) and the most stable (methyl ether) alcohol derivatives are useful in analysis, but in synthesis they can be used only in exceptional cases. In synthesis, easily accessible intermediates of medium stability are most helpful. 

J. Rebek, Jr., (1987) first developed a new synthesis of Kemp s acid and then extensively explored its application in model studies. The synthesis involves the straightforward hydrogenation (A. Steitz, 1968), esterification and methylation of inexpensive 1,3,5-benzenetricar-boxylic acid (trimesic acid 30/100 g). The methylation of the trimethyl ester with dimethyl sulfate, mediated by lithium diisopropylamide (V. J. Shiner, 1981), produced mainly the desired aff-cis-1,3,5-trimethyl isomer, which was saponified to give Kemp s acid. 

Sodium metal (0.23 g, 10 mmol) was dissolved in abs. EtOH (30 ml), Gramine (1.74g, 10 mmol) and diethyl formamidoinalonate (2.03 g, 10 mmol) were added, followed by slow addition of dimethyl sulfate (2.52 g). The solution was allowed to stand at room temperature for 4h, during which a precipitate formed. The mixture was poured into water and the product collected by filtration (99% yield). 

Alkylation of bis(4-methyl-2-thiazolyl)urea (257) with dimethyl sulfate gives product 258 dimethylated on the ring nitrogens (Scheme 154) (488). Alkylation of l-alkyl-3-(2-thiazolyl)urea from its derived anion formed by NaH gives 259 (Scheme 155). 

The reactivity of sulfathiazoles has been reviewed (65). Methylation in alkaline solution with dimethyl sulfate gives only the ring methylated derivative (85). Mixtures of products are obtained with diazomethane as alkylating agent (see p. 37). Other alkyl halides in aqueous alkali lead also to ring-alkylated products (85. 251, 650. 669-671). 

Some esters of inorganic acids such as dimethyl sulfate are used as reagents m syn thetic organic chemistry Certain naturally occurring alkyl phosphates play an important role m biological processes... 

Esters. Esters of inorganic acids are named as the salts for example, ( 113)2804, dimethyl sulfate. However, if it is desired to specify the constitution of the compound, the nomenclature for coordination compounds should be used. 

Nitromethane also is used in the synthesis of the antiulcer dmg, ranitidine [66357-35-5]. A two-step process utilizing nitromethane, carbon disulfide, potassium hydroxide, and dimethyl sulfate yields l,l-bis(methylthio)-2-nitroethene [13623-94 ] which reacts further to produce ranitidine. 

QuaterniZation. Quaternary ammonium compounds are formed by alkylation of alkyl, alkyl dimethyl, dialkyl, and dialkylmethyl fatty amines with methyl chloride, dimethyl sulfate, or benzyl chloride (1,3,7,12,29). 

V,/V-dimethy1amino)pheno1 (177). In addition, 3-aminophenol may be methylated with dimethyl sulfate under neutral conditions, or its hydrochloride salt heated with methanol at 170°C under pressure for 8 h to give the desired product (178). The compound is used primarily as an intermediate in the production of basic (Red 3 and Red 11) and mordant (Red 77) dyes. 

Fats, Oils, or Fatty Acids. The primary products produced direcdy from fats, oils, or fatty acids without a nitrile iatermediate are the quatemized amidoamines, imidazolines, and ethoxylated derivatives (Fig. 3). Reaction of fatty acids or tallow with various polyamines produces the iatermediate dialkylarnidoarnine. By controlling reaction conditions, dehydration can be continued until the imidazoline is produced. Quaternaries are produced from both amidoamines and imidazolines by reaction with methyl chloride or dimethyl sulfate. The amidoamines can also react with ethylene oxide (qv) to produce ethoxylated amidoamines which are then quaternized. 

Etherification. The reaction of alkyl haUdes with sugar polyols in the presence of aqueous alkaline reagents generally results in partial etherification. Thus, a tetraaHyl ether is formed on reaction of D-mannitol with aHyl bromide in the presence of 20% sodium hydroxide at 75°C (124). Treatment of this partial ether with metallic sodium to form an alcoholate, followed by reaction with additional aHyl bromide, leads to hexaaHyl D-mannitol (125). Complete methylation of D-mannitol occurs, however, by the action of dimethyl sulfate and sodium hydroxide (126). A mixture of tetra- and pentabutyloxymethyl ethers of D-mannitol results from the action of butyl chloromethyl ether (127). Completely substituted trimethylsilyl derivatives of polyols, distillable in vacuo, are prepared by interaction with trim ethyl chi oro s il an e in the presence of pyridine (128). Hexavinylmannitol is obtained from D-mannitol and acetylene at 25.31 MPa (250 atm) and 160°C (129). 

The diesters are moderately polar and therefore are miscible with most common organic solvents. SolubiHty in water is low-to-insoluble, with dimethyl sulfate having a water solubiHty of 2.8 g/100 mL at 18.0°C (2). 

All lation. In alkylation, the dialkyl sulfates react much faster than do the alkyl haHdes, because the monoalkyl sulfate anion (ROSO ) is more effective as a leaving group than a haHde ion. The high rate is most apparent with small primary alkyl groups, eg, methyl and ethyl. Some leaving groups, such as the fluorinated sulfonate anion, eg, the triflate anion, CF SO, react even faster in ester form (4). Against phenoxide anion, the reaction rate is methyl triflate [333-27-7] dimethyl sulfate methyl toluenesulfonate [23373-38-8] (5). Dialkyl sulfates, as compared to alkyl chlorides, lack chloride ions in their products chloride corrodes and requires the use of a gas instead of a Hquid. The lower sulfates are much less expensive than lower bromides or iodides, and they also alkylate quickly. 

The nitrogen of aHphatic and aromatic amines is alkylated rapidly by alkyl sulfates yielding the usual mixtures. Most tertiary amines and nitrogen heterocycles are converted to quaternary ammonium salts, unless the nitrogen is of very low basicity, eg, ia tn phenylamine. The position of dimethyl sulfate-produced methylation of several heterocycles with more than one heteroatom has been examined (22). Acyl cyanamides can be methylated (23). Metal cyanates are converted to methyl isocyanate or ethyl isocyanate ia high yields by heating the mixtures (24,25). 

Carbon is alkylated ia the form of enolates or as carbanions. The enolates are ambident ia activity and can react at an oxygen or a carbon. For example, refluxing equimolar amounts of dimethyl sulfate and ethyl acetoacetate with potassium carbonate gives a 36% yield of the 0-methylation product, ie, ethyl 3-methoxy-2-butenoate, and 30% of the C-methylation product, ie, ethyl 2-methyl-3-oxobutanoate (26). Generally, only one alkyl group of the sulfate reacts with beta-diketones, beta-ketoesters, or malonates (27). Factors affecting the 0 C alkylation ratio have been extensively studied (28). Reaction ia the presence of soHd Al O results mosdy ia C-alkylation of ethyl acetoacetate (29). 

Carbanions ia the form of phenyllithium, sodium naphthalene complex, sodium acetyHde, or aromatic Grignard reagents react with alkyl sulfates to give a C-alkyl product (30—33). Grignard reagents require two moles of dimethyl sulfate for complete reaction. 

Sulfates having alkyl groups from methyl to pentyl have been examined. With methyl as an example, the hydrolysis rate of dimethyl sulfate iacreases with the concentration of the sulfate. Typical rates ia neutral water are first order and are 1.66 x lO " at 25°C and 6.14 x lO " at 35°C (46,47). Rates with alkaH or acid depend on conditions (42,48). Rates for the monomethyl sulfate [512-42-5] are much slower, and are nearly second order ia base. Values of the rate constant ia dilute solution are 6.5 X 10 L/(mol-s) at 100°C and 4.64 X 10 L/(mol-s) at 138°C (44). At 138°C, first-order solvolysis is ca 2% of the total. Hydrolysis of the monoester is markedly promoted by increasing acid strength and it is first order. The rate at 80°C is 3.65 x lO " ... 

Alkaline solvolysis has been studied by a calorimetric method (49). Heat of hydrolysis of dimethyl sulfate to the monoester under alkaline conditions is 106 kj/mol (25 kcal/mol) (51). 

CycHc esters show accelerated hydrolysis rates. Ethylene sulfate compared to dimethyl sulfate is twice as fast ia weak acid (first order) and 20 times as fast ia weak alkaH (second order) (50). Catechol sulfate [4074-55-9] is 2 x 10 times faster than diphenyl sulfate ia alkaline solution (52). Alcoholysis rates of several dialkyl sulfates at 35—85°C are also known (53). 

---