Styrene copolymer elastomer

Uses U V absorber/stabilizer for plastics incl. thermoplastic PU, rigid and plasticized PVC, PVB, PMMA, PC, PVdC, EVOH, EVA, spin finishes for PA, PET, PU, PP fibers, latexes, waxes, adhesives, PS, styrenic copolymers, elastomers, polyolefins... [Pg.861]

Buna S or SS Butadiene/styrene copolymer (elastomer) HUls, Germany... [Pg.1135]

ABS plastics Abbreviated phrase referring to acrylonitrile-butadiene-styrene copolymers elastomer-modified styrene. [Pg.1091]

Acrylonitrile-butadiene-styrene copolymer/polyvinylchloride, ABS/PVC - ABS 860 Acrylonitrile-butadiene-styrene copolymer/elastomer, ABS/elastomer, ABS impact modified, e.g., 284, 495, 521, 723, Q130, 1146, 1152, Elite LGA... [Pg.220]

Nazhat SN, Parker S, Patel MP, Braden M. Isoprene-styrene copolymer elastomer and tetrahydro-furfuryl methacrylate mixtures for soft prosthetic applications. BiomaferiaZs 2001 22 2411-2416. [Pg.284]

Many synthetic latices exist (7,8) (see Elastomers, synthetic). They contain butadiene and styrene copolymers (elastomeric), styrene—butadiene copolymers (resinous), butadiene and acrylonitrile copolymers, butadiene with styrene and acrylonitrile, chloroprene copolymers, methacrylate and acrylate ester copolymers, vinyl acetate copolymers, vinyl and vinyUdene chloride copolymers, ethylene copolymers, fluorinated copolymers, acrylamide copolymers, styrene—acrolein copolymers, and pyrrole and pyrrole copolymers. Many of these latices also have carboxylated versions. [Pg.23]

I ew Rubber-Modified Styrene Copolymers. Rubber modification of styrene copolymers other than HIPS and ABS has been useful for specialty purposes. Transparency has been achieved with the use of methyl methacrylate as a comonomer styrene—methyl methacrylate copolymers have been successfully modified with mbber. Improved weatherability is achieved by modifying SAN copolymers with saturated, aging-resistant elastomers (88). [Pg.509]

Ban H.T., Kase T., Kawabe M., Miyazawa A., Ishihara T., Hagihara H., Tsunogae Y., Murata M. and Shiono T.A. New approach to styrenic thermoplastic elastomers S3Tithesis and characterization of crystalline styrene-butadiene-styrene triblock copolymers. Macromolecules, 39, 171, 2006. [Pg.155]

Hashimoto T., Order disorder transition in block copolymers. Thermoplastic Elastomers A Comprehensive Review (Legge N.R., Holden G., and Schroeder H.E., eds.), Hanser Publishers, Munich, 1987. Bianchi U. and Pedemonte E., Morphology of styrene butadiene styrene copolymer. Polymer, 11, 268, 1970. [Pg.161]

An elastomer is a polymer that is flexible, allowing it to be distorted from one shape to another. Polyisoprene (natural mbber), polybutadiene, and butadiene-styrene copolymer are the most important commercial elastomers. All contain some CDC bonds, and their bulk properties are affected by the varying geometries about the carbon atoms that make up the polymer backbone. [Pg.916]

The isoprene units in the copolymer impart the ability to crosslink the product. Polystyrene is far too rigid to be used as an elastomer but styrene copolymers with 1,3-butadiene (SBR rubber) are quite flexible and rubbery. Polyethylene is a crystalline plastic while ethylene-propylene copolymers and terpolymers of ethylene, propylene and diene (e.g., dicyclopentadiene, hexa-1,4-diene, 2-ethylidenenorborn-5-ene) are elastomers (EPR and EPDM rubbers). Nitrile or NBR rubber is a copolymer of acrylonitrile and 1,3-butadiene. Vinylidene fluoride-chlorotrifluoroethylene and olefin-acrylic ester copolymers and 1,3-butadiene-styrene-vinyl pyridine terpolymer are examples of specialty elastomers. [Pg.20]

Sytrene-butadiene (Buna-S) and styrene-acrylonitrile (SAN) (Buna-N) copolymer elastomers Melamine-formaldehyde (ME) resins Nylon-6 (Schlack)... [Pg.743]

Copolymerization allows the synthesis of an almost unlimited number of different products by variations in the nature and relative amounts of the two monomer units in the copolymer product. A prime example of the versatility of the copolymerization process is the case of polystyrene. More than 11 billion pounds per year of polystyrene products are produced annually in the United States. Only about one-third of the total is styrene homopolymer. Polystyrene is a brittle plastic with low impact strength and low solvent resistance (Sec. 3-14b). Copolymerization as well as blending greatly increase the usefulness of polystyrene. Styrene copolymers and blends of copolymers are useful not only as plastics but also as elastomers. Thus copolymerization of styrene with acrylonitrile leads to increased impact and solvent resistance, while copolymerization with 1,3-butadiene leads to elastomeric properties. Combinations of styrene, acrylonitrile, and 1,3-butadiene improve all three properties simultaneously. This and other technological applications of copolymerization are discussed further in Sec. 6-8. [Pg.465]

Methacrylonitrile (1) differs from 2 only in that it has a methyl (CH3) group on the a-carbon atom. It too is widely used in the preparation of homopolymers and copolymers, elastomers, and plastics and as a chemical intermediate in the preparation of acids, amides, amines, esters, and other nitriles. In a study conducted by the NTP in which 1 was administered orally to mice for 2 years, there was no evidence that it caused cancer, although other less serious toxic effects were noted [27]. Because 1 does not cause cancer, but undergoes many of the same nucleophilic addition reactions as 2 at the (3-carbon, it is sometimes used as a safer commercial replacement for 2, such as in the manufacture of an acrylonitrile-butadiene-styrene-like polymer that provides improved barrier properties to gases such as carbon dioxide in carbonated beverage containers. [Pg.12]

HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HNS NTO NTO/HMX NTO/HMX NTO/HMX PETN PETN PETN PETN PETN PETN PETN PETN PETN PETN RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX TATB/HMX Cariflex (thermoplastic elastomer) Hydroxy-terminated polybutadiene (polyurethane) Hydroxy-terminated polyester Kraton (block copolymer of styrene and ethylene-butylene) Nylon (polyamide) Polyester resin-styrene Polyethylene Polyurethane Poly(vinyl) alcohol Poly(vinyl) butyral resin Teflon (polytetrafluoroethylene) Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Cariflex (block copolymer of butadiene-styrene) Cariflex (block copolymer of butadiene-styrene) Estane (polyester polyurethane copolymer) Hytemp (thermoplastic elastomer) Butyl rubber with acetyl tributylcitrate Epoxy resin-diethylenetriamine Kraton (block copolymer of styrene and ethylene-butylene) Latex with bis-(2-ethylhexyl adipate) Nylon (polyamide) Polyester and styrene copolymer Poly(ethyl acrylate) with dibutyl phthalate Silicone rubber Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Epoxy ether Exon (polychlorotrifluoroethylene/vinylidine chloride) Hydroxy-terminated polybutadiene (polyurethane) Kel-F (polychlorotrifluoroethylene) Nylon (polyamide) Nylon and aluminium Nitro-fluoroalkyl epoxides Polyacrylate and paraffin Polyamide resin Polyisobutylene/Teflon (polytetrafluoroethylene) Polyester Polystyrene Teflon (polytetrafluoroethylene) Kraton (block copolymer of styrene and ethylene-butylene)... [Pg.12]

Early investigations of crosslinked polymeric materials observed line width changes with cure. An increase in the line width is observed in vulcanized elastomers at room temperature, compared with the unvulcanized samples 13). The effect of vulcanization on line widths of butadiene-styrene copolymers in a temperature range near the glass transition (Tg), was interpreted in terms of the formation of cooperative domains, which lead to larger linewidths (Av)14). Both, an increase in Av and shift of the transition range to higher temperatures due to the restriction of molecular mobility... [Pg.11]

Sealants - [ELASTOMERSSYNTHETIC - POLYISOPRENE] (Vol 9) - [SEALANTS] (Vol 21) -acrylics [ACRYLICESTERPOLYMERS - SURVEY] (Voll) -barium compds in [BARIUM COMPOUNDS] (Vol 3) -based on liquid polysulfides [POLYMERS CONTAINING SULFUR - POLYSULFIDES] (Vol 19) -defoamersin [DEFOAMERS] (Vol 7) -fiom fluorosilicones [FLUORINE COMPOUNDS,ORGANIC - POLY(FLUOROSILICONES)] (Volll) -hydrocarbon resins in [HYDROCARBON RESINS] (Vol 13) -lecithin in (LECITHIN] (Vol 15) -organolithiumcmpdsinprdnof [LITHIUM AND LITHIUM COMPOUNDS] (Vol 15) -polysulfide curing [PEROXIDES AND PEROXIDE COMPOUNDS - INORGANIC PEROXIDES] (Vol 18) -propylene oxide in mfg of [PROPYLENE OXIDE] (Vol 20) -PVB m [VINYL POLYMERS - VINYL ACETAL POLYMERS] (Vol 24) -rheological measurements [RHEOLOGICAL MEASUREMENTS] (Vol 21) -from styrenic block copolymers [ELASTOMERS SYNTHETIC - THERMOPLASTIC ELASTOMERS] (Vol 9) -use of dispersants [DISPERSANTS] (Vol 8)... [Pg.874]

RUBBER (Synthetic). Any of a group of manufactured elastomers that approximate one or more of the properties of natural rubber. Some of these aie sodium polysulfide ( Thiokol ). polychloiopiene (neoprene), butadiene-styrene copolymers (SBR), acrylonitrilebutadiene copolymers (nitril rubber), ethvlenepropylene-diene (EPDM) rubbers, synthetic poly-isoprene ( Coral, Natsyn ), butyl rubber (copolymer of isobutylene and isoprene), polyacrylonitrile ( Hycar ). silicone (polysiloranei. epichlorohy-drin, polyurethane ( Vulkollan ). [Pg.1452]

Elastomeric graft copolymers of methyl methacrylate upon diene and acrylic rubbers were prepared by R. G. Bauer and co-workers. These elastomers are compatible with rigid methyl methacrylate-styrene copolymers of identical refractive index, yielding transparent polyblends. [Pg.11]

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... [Pg.958]

Although butadiene/styrene copolymers (manufactured by free radical polymerisation processes) are elastomers of great technical importance, rather little... [Pg.316]

Styrene-Butadiene Copolymer Elastomers. SBR elastomers are employed in low-cost contact adhesives suitable for less-demanding applications—such as when exposure to elevated temperature is not likely, and when a bond of moderate strength is adequate. They can be dissolved in aliphatic hydrocarbon solvents and used to bond solvent-sensitive substrates like expanded polystyrene. [Pg.95]

Styrene-Diene. These ( styrenic ) thermoplastic elastomers are block copolymers of styrene with butadiene (SBS) or isoprene (SIS) in about 30/70 monomer ratio. [Pg.654]

In addition to the relative ratio of the monomers, the arrangement of the units in the chain is important. This arrangement is referred to as the copolymer sequence distribution. In the previous discussion, the assumption was made that the comonomer units were well mixed in the polymer chain. If this is not the case, parts of the chain can reflect properties of the corresponding homopolymer. It is thus possible to produce polymers that have significantly different properties in different parts of the polymer chain. A most dramatic example of this can be found in styrene-butadiene-styrene or styrene-isoprene-styrene thermoplastic elastomers. The properties of these unique materials will be discussed in the section Thermoplastic Elastomers. ... [Pg.692]

Semifluorinated block copolymers, (I), were previously prepared by the author [1] and then blended with styrene-ethylene/butylene-styrene thermoplastic elastomers to provide surface-active block copolymers. [Pg.110]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...