Chloroprene copolymers

This is the preferred designation for all chloroprene polymers and copolymers. Chloroprene rubber was first introduced commercially in 1931 by DuPont and their trade name, originally DuPrene, later Neoprene, has almost become a generic term for all such rubber. See Chlorobutadiene. 

Butadiene Polybutadiene, copolymers, chloroprene, adipodinitrile, sulfolene 9 (2009)... 

Polymers of chloroprene (structure [XII]) are called neoprene and copolymers of butadiene and styrene are called SBR, an acronym for styrene-butadiene rubber. Both are used for many of the same applications as natural rubber. Chloroprene displays the same assortment of possible isomers as isoprene the extra combinations afforded by copolymer composition and structure in SBR offsets the fact that structures [XIIll and [XIV] are identical for butadiene. 

Many synthetic latices exist (7,8) (see Elastomers, synthetic). They contain butadiene and styrene copolymers (elastomeric), styrene—butadiene copolymers (resinous), butadiene and acrylonitrile copolymers, butadiene with styrene and acrylonitrile, chloroprene copolymers, methacrylate and acrylate ester copolymers, vinyl acetate copolymers, vinyl and vinyUdene chloride copolymers, ethylene copolymers, fluorinated copolymers, acrylamide copolymers, styrene—acrolein copolymers, and pyrrole and pyrrole copolymers. Many of these latices also have carboxylated versions. 

Finally, block copolymers have been made in a two-step process. First a mixture of chloroprene and -xylenebis-Ai,Ar-diethyldithiocarbamate is photopolymerized to form a dithiocarbamate terminated polymer which is then photopolymerized with styrene to give the block copolymer. The block copolymer has the expected morphology, spheres of polystyrene domains in a polychloroprene matrix (46). 

Alternating copolymers of chloroprene have been prepared from a number of donor acceptor complexes in the presence of metal haUdes. 

The process for manufacture of a chloroprene sulfur copolymer, Du Pont type GN, illustrates the principles of the batch process (77,78). In this case, sulfur is used to control polymer molecular weight. The copolymer formed initially is carried to fairly high conversion, gelled, and must be treated with a peptising agent to provide a final product of the proper viscosity. Key control parameters are the temperature of polymerisation, the conversion of monomer and the amount/type of modifier used. 

During World War II, polychloroprene was chosen as a replacement for natural rubber because of its availability. Two copolymers of chloroprene and sulphur which contain thiuram disulphide were available (Neoprene GN and CG). One of the first successful applications of these polychloroprene adhesives was for temporary and permanent sole attachment in the shoe industry. However, these polychloroprene cements show a decrease in viscosity on ageing and a black discolouration appears during storage in steel drums. Discolouration was produced by trace amounts of hydrochloric acid produced by oxidation of polychloroprene... 

Neoprene latex 115 contains a copolymer of chloroprene and methacrylic acid, stabilized with polyvinyl alcohol [15], With respect to other polychloroprene latices, this latex has two major advantages (1) excellent colloidal stability, which gives high resistance to shear and a broad tolerance to several materials ... 

Park et al. [20] reported on the synthesis of poly-(chloroprene-co-isobutyl methacrylate) and its compati-bilizing effect in immiscible polychloroprene-poly(iso-butyl methacrylate) blends. A copolymer of chloroprene rubber (CR) and isobutyl methacrylate (iBMA) poly[CP-Co-(BMA)] and a graft copolymer of iBMA and poly-chloroprene [poly(CR-g-iBMA)] were prepared for comparison. Blends of CR and PiBMA are prepared by the solution casting technique using THF as the solvent. The morphology and glass-transition temperature behavior indicated that the blend is an immiscible one. It was found that both the copolymers can improve the miscibility, but the efficiency is higher in poly(CR-Co-iBMA) than in poly(CR-g-iBMA),... 

A chloro-substituted cycloalkene, 1-chloro-l, 5-cyclooctadiene, has also been converted by metathesis into a polymer, the perfectly alternating copolymer of butadiene and chloroprene (29). 

Emulsion polymerization is the most important process for production of elastic polymers based on butadiene. Copolymers of butadiene with styrene and acrylonitrile have attained particular significance. Polymerized 2-chlorobutadiene is known as chloroprene rubber. Emulsion polymerization provides the advantage of running a low viscosity during the entire time of polymerization. Hence the temperature can easily be controlled. The polymerizate is formed as a latex similar to natural rubber latex. In this way the production of mixed lattices is relieved. The temperature of polymerization is usually 50°C. Low-temperature polymerization is carried out by the help of redox systems at a temperature of 5°C. This kind of polymerization leads to a higher amount of desired trans-1,4 structures instead of cis-1,4 structures. Chloroprene rubber from poly-2-chlorbutadiene is equally formed by emulsion polymerization. Chloroprene polymerizes considerably more rapidly than butadiene and isoprene. Especially in low-temperature polymerization emulsifiers must show good solubility and... 

II. B polyethylene glycol, ethylene oxide, polystyrene, diisocyanates (urethanes), polyvinylchloride, chloroprene, THF, diglycolide, dilac-tide, <5-valerolactone, substituted e-caprolactones, 4-vinyl anisole, styrene, methyl methacrylate, and vinyl acetate. In addition to these species, many copolymers have been prepared from oligomers of PCL. In particular, a variety of polyester-urethanes have been synthesized from hydroxy-terminated PCL, some of which have achieved commercial status (9). Graft copolymers with acrylic acid, acrylonitrile, and styrene have been prepared using PCL as the backbone polymer (60). 

Chloroprene monomer will autoxidise very rapidly with air, and even at 0°C it produces an unstable peroxide (a mixed 1,2- and 1,4-addition copolymer with oxygen), which effectively will catalyse exothermic polymerisation of the monomer. The kinetics of autoxidation have been studied [1], It forms popcorn polymer at a greater rate than does butadiene [2],... 

The presence of halogen atoms appears to exert little, if any, effect on catalyst activity, but it can influence the course of the metathesis reaction. Vinylic halides are unreactive, as exemplified by the ring-opening polymerization of l-chloro-l,5-cyclooctadiene, which afforded a perfectly alternating copolymer of butadiene and chloroprene (7/2) via polymerization exclusively through the unsubstituted double bond. 

Chloroprene-dichlorobutadiene copolymers, 79 843 Chloroprene elastomers, 27 767 Chloroprene peroxides, 79 829 Chloroprene (Ml) reactivity ratios, 79 832t Chloroprene rubber, 9 561-562 79 828 Chloroprene-sulfur copolymerization, 79 833-834... 

Copolymerization. See also Copolymers of acrylonitrile, 11 202-204 anionic, 7 624-626 catalytic, 7 627-632 cationic, 7 626-627 chloroprene-sulfur, 19 833-834 of cyclic olefins, 16 112-113 with depropagation, 7 617-619 free-radical, 7 611-624 heterogeneous, 11 203-204 homogenous, 11 202-203 with metallocene catalysts, 16 111... 

Chloroprene-SO- Copolymers. The second copolymer system to be discussed is the chloroprene-S02 system. This presents potential complications beyond that of the styrene-SO, system because the chloroprene may enter the chain in 1,4-cis, 1,4-trans, 1,2 or 3,4 fashion ... 

We have prepared a series of copolymers under the conditions shown in Table 2. The monomer feed was always a 50 50 ratio of chloroprene to sulfur dioxide. Copolymerizations were carried out in bulk at temperatures from -78 to 100°. Initiators were tertiary butyl hydroperoxide at low temperatures, where it forms a redox system with the SO2 and is more effective than one might otherwise expect. Silver nitrate was used at 0° and 25°, azoiso-butyronitrile at 40° and 60°, and azodicyclohexanecarbonitrile... 

Figure 6. A 90-MHz C-13 spectrum of chloroprene-SOi copolymer prepared at 40°C and having an R value of 1.64...

I have discussed two cases of chain microstructure determination in SO2 copolymers. First, the styrene-S02 system, which exhibits the general kinetic and compositional behavior of such systems, particularly as a function of polymerization temperature. Second, and considerably more complicated, is the chloroprene-S02 system. This one represents the limit of what can be handled and more or less completely solved at the present time. To do so requires about all o ir resources at superconducting frequen-... 

Over 5.5 billion pounds of synthetic rubber is produced annually in the United States. The principle elastomer is the copolymer of butadiene (75%) and styrene (25) (SBR) produced at an annual rate of over 1 million tons by the emulsion polymerization of butadiene and styrene. The copolymer of butadiene and acrylonitrile (Buna-H, NBR) is also produced by the emulsion process at an annual rate of about 200 million pounds. Likewise, neoprene is produced by the emulsion polymerization of chloroprene at an annual rate of over 125,000 t. Butyl rubber is produced by the low-temperature cationic copolymerization of isobutylene (90%) and isoprene (10%) at an annual rate of about 150,000 t. Polybutadiene, polyisoprene, and EPDM are produced by the anionic polymerization of about 600,000, 100,000, and 350,000 t, respectively. Many other elastomers are also produced. 

When the NMR spectrum of a 30% (w./v.) solution of peroxide in toluene was recorded at 34°C., absorption was observed between 8 2.74 and 5.46. There were seven main resonances, all multiplets, which were interpreted in terms of aliphatic hydrogen shifted by oxygen. Resonance from ethylenic hydrogen amounted to only a fraction of a proton. However, the sample darkened while in the instrument and probably decomposed extensively. When the spectrum of a solution of peroxide prepared by oxidation to 10.4 mole % was recorded using a cold probe at —35°C. a different picture was obtained. There was complex absorption from both ethylenic and saturated hydrogen which was interpreted as arising from a mixture of 1,2 and 1,4 oxygen copolymers in an approximate jatio of 1 to 2. In this sample the residual chloroprene amounted to 0.15% of the monomer units in the peroxide and dimers of chloroprene to 0.6% of the peroxide. 

Fig. 20. Composition of copolymers formed by rubber mastication (A0, B0,C0) initial molar fractions of styrene, methyl methacrylate, and chloroprene, respectively. (Full lines) calculated compositions based on r, and r2 values of 0.50 and 0.44 for styrene and methyl methacrylate and of 0.083 and 6.12 for methyl methacrylate and chloroprene (69)...

Butadiene is used primarily in the production of synthetic rubbers, including styrene-butadiene rubber (SBR), polybutadiene nibber (BR), styrene-butadiene latex (SBL), chloroprene rubber (CR) and nitrile rubber (NR). Important plastics containing butadiene as a monomeric component are shock-resistant polystyrene, a two-phase system consisting of polystyrene and polybutadiene ABS polymers consisting of acrylonitrile, butadiene and styrene and a copolymer of methyl methacrylate, butadiene and styrene (MBS), which is used as a modifier for poly(vinyl chloride). It is also used as an intermediate in the production of chloroprene, adiponitrile and other basic petrochemicals. The worldwide use pattern for butadiene in 1981 was as follows (%) SBR + SBL, 56 BR, 22 CR, 6 NR, 4 ABS, 4 hexamethylenediamine, 4 other, 4. The use pattern for butadiene in the United States in 1995 was (%) SBR, 31 BR, 24 SBL, 13 CR, 4 ABS, 5 NR, 2 adiponitrile, 12 and other, 9 (Anon., 1996b). 

Neoprene - Originally the trade name, now the generic name of polymers and copolymers based on chloroprene. ASTM designation CR. 

---