Polyvinyl acetate plastic

NS 5%(suitable for ignition rather than for detonation) and b)K chlorate 55 Pb thiocyanate 45% E)Colored smokes K chlorate 22-33, dye 30-50, Na or K bicarbonate 3-10, confectioner s sugar or lactose 20-35, kerosene or paraffin oil 2-4, kieselguhr 0-4 red iron oxide 0-3% F) Plastic Bonded colored smoke K chlorate 23, dye 51, sugar 18 K bicarbonate 8% combined with 2.2 parts of polyvinyl acetate plasticized by dichloro-methane and dried by evapn G) Cap mixtures a)K chlorate 67, red P 27, S 3 pptd Ca carbonate 3%, bound with unspecified amt of gum water and b)K chlorate 61, red P 4, black Sb sulfide 21,pptd Ca carbonate 2 animal glue 12% H)Railroad torpedo K chlorate 40, S 16, sand(60 mesh) 37, binder 5 8r neutralizer 2% I)Whistling compns K chlorate 73-77, gallic acid 24-19 red gum 3-4%(Ref 26,pp 270-80)... 

Note 1 PVAC/P/C Polyvinyl acetate/plasticizer/chlorhexidine Note 2 PB/P/C Polybutyral/plasticizer/chlorhexidine Note 3 P Plasticizer (ethylene glycol dibenzoate)... 

Sealants and caulks based on vinyl acetate homo- and copolymers have been on the market since the late 1950s. Use of these lower-performance materials has been mostly in residential areas—bathtub caulking, wall tile joints, wallboard joints, etc. Latex caulks based on polyvinyl acetate plasticized with dibutyl phthalate, or on one of the newer vinyl acetate-acrylic emulsion copolymers, have the same ease of application as the acrylic emulsion caulks but are less flexible, harden on aging, and have inferior exterior durability. ... 

Cellular organic plastics. Elastomer, polystyrene, polyisocyanate, polyisocyanurate, and polyvinyl acetate. 

Group of plastics composed of resins derived from vinyl monomers, excluding those that are covered by other classifications (i.e., acrylics and styrene plastics). Examples include PVC, polyvinyl acetate, polyvinyl butyral, and various... 

More than 65% of the acetic acid produced in the United States goes into vinyl acetate. Nearly all the vinyl acetate ends up as polyvinyl acetate, used to make plastics, latex paints, and adhesives. About 12% of acetic acid is converted to acetic anhydride that is mostly used to make cellulose acetate, the white stuff in cigarette filters. It is also used in the manufacture of plastic sheeting and film and in formulating lacquers. 

Uses Preparation of sodium and butyl benzoates, benzoyl chloride, phenol, caprolactum, and esters for perfume and flavor industry plasticizers manufacture of alkyl resins preservative for food, fats, and fatty oils seasoning tobacco dentifrices standard in analytical chemistry antifungal agent synthetic resins and coatings pharmaceutical and cosmetic preparations plasticizer manufacturing (to modify resins such as polyvinyl chloride, polyvinyl acetate, phenol-formaldehyde). 

Uses In polyvinyl acetate to improve fiber-tear properties plasticizer for polystyrene in epoxy resins and polyvinyl acetate to improve adhesion and resistance to chemical attack as an insulator fluid for electric condensers and as an additive in very high pressure lubricants. In fluorescent and high-intensity discharge ballasts manufactured prior to 1979 (U.S. EPA, 1998). 

The most widely used polyvinyl acetal is polyvinyl butyrai (PVB). This transparent amorphous plastic is used as a plasticized polymer in the inner lining of safety windshield glass (Saflex). Because of the presence of hydroxyl groups, the commercial product, which is produced from 75% hydrolyzed PVAc, has a Tg of about 49 C and has excellent adhesion to glass. 

Polyvinyl acetate phthalate (PYAP) dissolves at pH higher than 5 and is soluble in ethanol. Plasticizers that are used with PVAP include triethyl citrate, glyceryl triacetate, and acetyltriethyl citrate. 

Oyanagi,Y., Ferry, J.D. Viscoelastic properties of polyvinyl acetates. IV. Creep studies of plasticized fractions. J. Colloid Sci. 21, 547-559 (1966). 

Standard Oil Co. claims the use of polyisobutylene as a plasticizer for polyvinyl acetate. Copolymers of isobutylene with vinyl ethers and other monomers are mentioned in several patents. For synthetic rubbers, oligomers of butadiene are claimed. Rubberlike polyolefins (10 to 50% is sufficient) are used extensively for plasticizing phenolic resins to increase impact strength. 

Heat-setting resins cannot be plasticized by low molecular weight plasticizers. Polyvinyl acetals have been claimed for these products. American Cyanamid Co. has suggested polyvinyl acetals or butyrals in an amount of 10 to 25% of the resin for urea and melamine resins. For varnishes and adhesives, combinations of phenolic resins and polyvinyl formal are recommended. Polyvinyl acetals with higher alkyl radicals are suitable for cellulose esters and improve elasticity as well as resistance against water. 

NaC103 31, plasticizer (0.5 lkg polyvinyl acetate in 1 liter of liq DNT) 24% This compn is fairly water resistant and suitable for use in mines... 

While unaffected by water, styrofoam is dissolved by many organic solvents and is unsuitable for high-temperature applications because its heat-distortion temperature is around 77°C. Molded styrofoam objects are produced commercially from expandable polystyrene beads, but this process does not appear attractive for laboratory applications because polyurethane foams are much easier to foam in place. However, extruded polystyrene foam is available in slabs and boards which may be sawed, carved, or sanded into desired shapes and may be cemented. It is generally undesirable to join expanded polystyrene parts with cements that contain solvents which will dissolve the plastic and thus cause collapse of the cellular structure. This excludes from use a large number of cements which contain volatile aromatic hydrocarbons, ketones, or esters. Some suitable cements are room-temperature-vulcanizing silicone rubber (see below) and solvent-free epoxy cements. When a strong bond is not necessary, polyvinyl-acetate emulsion (Elmer s Glue-All) will work. 

Poly(vinyl acetate vinyl alcohol) - A water plasticized polyvinyl acetate with minor hydrolysis to form vinyl alcohol sites to a molecular weight of -50,000 g/ mole plasticized with mono/diethylene glycol dibenzoate. This material was dissolved in ethanol for application purposes. 

Polyvinyl acetate-vinyl alcohol - This plasticized polymer formulation is insoluble in water and was dissolved in ethanol and quickly (-5 min) formed... 

In spite of Baekeland s success, it was another two decades before the Age of Polymers can really be said to have been born. The 1920s and 1930s saw the invention and/or commercialization of a number of new polymeric products ("plastics") that most consumers now consider to he essential chemicals in their lives. These products include the urea formaldehyde plastics (1923), polyvinyl chloride (PVC 1926), polystyrene (1929), nylon (1930), polymethylmethacrylate (acrylics 1931), polyethylene (1933), the melamine plastics (1933), polyvinylidene chloride (Saran 1933), polyvinyl acetate (PVA 1937), and tetrafluoroethylene (Teflon 1938). 

Acetylcholineesterase Miniaturized multichannel transduc-tor with planar Au electrode which was first covered with a choline-selective liquid membrane made from 66% PVC-polyvinyl acetate (PVA), 33% 2-nitrophenyl octyl ether plasticizer and 1% ion-pair choline phosphotungstate. A second layer of 2% AChE in the PVA-polyethylene dispersion was spread on the top. The electrode was used as working electrode versus Ag/AgCl for potentiometric measurement of Ch and ACh in 0.1 M Tris buffer at 7.4. Optimum pH range for the sensor was 7-9. The calibration graph was linear from 0.02-10 mm ACh and detection limit was 5 pM. Response time was 3-5 min. Sensor was suitable for determination of ACh in biological fluids. [86]... 

Vinyls are one of the most versatile families of plastics. The term vinyl usually identifies the major very large production of polyvinyl chloride (PVC) plastics. The vinyl family, in addition to PVCs, consists of polyvinyl acetals, polyvinyl acetates, polyvinyl alcohols, polyvinyl carbazoles, polyvinyl chloride-acetates, and polyvinylidene chlorides. As a family, they are strong and abrasion resistant. They are unaffected, for the most part, by prolonged exposure to water, common chemicals,... 

To improve the properties of PLA, plasticizers, special additives such as chain-extenders, polymer blends, and composites are commonly investigated. Martin and Averous (10) have studied the effects of various plasticizers on the properties of PLA. Pilla et al. (11-12) have investigated the effects of chain-extenders on the foaming properties of PLA. In addition, a vast number of studies have been conducted to enhance the properties of PLA by blending it with various polymers such as polyethylene oxide (PEO), polypropylene oxide (PPO), polyvinyl acetate, polyolefins, polystyrene, HIPS (high impact polystyrene), polyacetals, polycarbonate, and acrylonitrile butadiene styrene (ABS) (13-26). 

Polyvinyl acetate emulsions for manual application in the production of adhesive bound books were examined for stability. It was found, among other things, that plasticized homopolymers had poor or moderate stability, while copolymer types showed very high stability. The addition of calcium carbonate and calcium acetate could improve the lasting qualities of unstable materials but had little effect on the very stable ones. The addition of these buffering agents made the adhesive less acid and less damaging to papers (6). 

Polyvinyl chloride (PVC) and polyvinyl acetate (PVA) are considered to be the first synthetic polymers created. Safe-handling cellulose acetate soon replaced explosive cellulose nitrate. Polyacrylonitrile and polyamides (Nylon) soon followed. American companies such as DuPont pioneered the development of plastics. England was responsible for the early development of polyester polymerization. 

---