Phenolic resins manufacture

Phenolic novolacs, 18 760-761 Phenolic resin adhesives, 18 783-784 Phenolic resin can coatings, 18 38 Phenolic resin composites, 18 792-794 Phenolic resin drying-oil varnishes, 18 783 Phenolic resin fibers, 18 797-798 mechanical properties of, 18 798 Phenolic resin foam, 18 795-796 Phenolic resin manufacturers, U.S., 18 774 Phenolic resin polymerization, 18 760-765 alkaline catalysts in, 18 762-765 neutral catalysts in, 18 761-762 strong-acid catalysts in, 18 760-761 Phenolic resin prepregs, 18 793 Phenolic resin production unit, 18 766 Phenolic resins, 10 409 18 754-755, 756-802 22 10 26 763 in abrasive materials, 18 786-787 in air and oil filters, 18 790 additional reactants in, 18 759 analytical methods for, 18 774-779 applications of, 18 781-798 batch processes for, 18 766 from biomass and biochemical processes, 18 769-770... 

PET production in, 20 20 petrochemical industry in, 24 254 petroleum refineries in, 24 258 phenol producers in, 18 752t phenolic resin manufacturers in, 18 774 phosphate rock production by, 19 17 phosphate rock statistics for, 19 15t phosphorus compound production in, 19 67t, 68t... 

Hexamethylenetetramine (HMTA) has important uses in modifying phenolic resin manufacture and is an intermediate in explosive manufacture. Although it is a complex three-dimensional structure, it is easily made by the condensation of formaldehyde and ammonia. 

U.S. phenolic resin manufacturers include Ashland, Borden Chemical, Cytec Fiberite, Durez, FiberCote Industries, H.B. Fuller, P.D. George, Georgia-Pacific,... 

Albertol, Alberlat n Modified phenolic resins. Manufactured by Chem. Werke Albert, Germany. 

Amino and Phenolic Resins. The largest use of formaldehyde is in the manufacture of urea—formaldehyde, phenol—formaldehyde, and melamine—formaldehyde resins, accounting for over one-half (51%) of the total demand (115). These resins find use as adhesives for binding wood products that comprise particle board, fiber board, and plywood. Plywood is the largest market for phenol—formaldehyde resins particle board is the largest for urea—formaldehyde resins. Under certain conditions, urea—formaldehyde resins may release formaldehyde that has been alleged to create health or environmental problems (see Amino RESINS AND PLASTICS). 

Paraformaldehyde is used by resin manufacturers seeking low water content or more favorable control of reaction rates. It is often used in making phenol—, urea—, resorcinol—, and melamine—formaldehyde resins. 

Phenols. The first stable ozone oxidation product of phenol in water is ds ds-raucomc acid, which requires - 2 mol O /mol phenol. In practice, larger dosage levels of ozone are required because other ozone-reactive substances are present in most wastes. Ozone oxidation of phenoHc effluents is employed in paper mills, coke mills, oil refineries, and thermoplastic resin manufacture, producing effluents that are safe to freshwater biota (122,123) (see Lignin Pulp). 

Ammonia is used in the fibers and plastic industry as the source of nitrogen for the production of caprolactam, the monomer for nylon 6. Oxidation of propylene with ammonia gives acrylonitrile (qv), used for the manufacture of acryHc fibers, resins, and elastomers. Hexamethylenetetramine (HMTA), produced from ammonia and formaldehyde, is used in the manufacture of phenoHc thermosetting resins (see Phenolic resins). Toluene 2,4-cHisocyanate (TDI), employed in the production of polyurethane foam, indirectly consumes ammonia because nitric acid is a raw material in the TDI manufacturing process (see Amines Isocyanates). Urea, which is produced from ammonia, is used in the manufacture of urea—formaldehyde synthetic resins (see Amino resins). Melamine is produced by polymerization of dicyanodiamine and high pressure, high temperature pyrolysis of urea, both in the presence of ammonia (see Cyanamides). 

Paint and varnish manufacturing Resin manufacturing closed reaction vessel Varnish cooldng-open or closed vessels Solvent thinning Acrolein, other aldehydes and fatty acids (odors), phthalic anhydride (sublimed) Ketones, fatty acids, formic acids, acetic acid, glycerine, acrolein, other aldehydes, phenols and terpenes from tall oils, hydrogen sulfide, alkyl sulfide, butyl mercaptan, and thiofen (odors) Olefins, branched-chain aromatics and ketones (odors), solvents Exhaust systems with scrubbers and fume burners Exhaust system with scrubbers and fume burners close-fitting hoods required for open kettles Exhaust system with fume burners... 

At one time the requirement for phenol (melting point 41°C), eould be met by distillation of eoal tar and subsequent treatment of the middle oil with eaustic soda to extraet the phenols. Such tar acid distillation products, sometimes containing up to 20% o-cresol, are still used in resin manufacture but the bulk of phenol available today is obtained synthetically from benzene or other chemicals by such processes as the sulphonation process, the Raschig process and the cumene process. Synthetic phenol is a purer product and thus has the advantage of giving rise to less variability in the condensation reactions. 

A number of other phenols obtained from coal tar distillates are used in the manufacture of phenolic resins. Of these the cresols are the most important... 

The method for producing formaldehyde was described in Chapter 19. In aminoplastics manufacture it is used in the form of formalin (36-37% w/w CH2O). As in the case of phenolic resin production, formalin with both high and low methanol content is used according to the needs of the manufacturer. The low methanol content formalin is more reactive but is also less stable and must be used soon after its preparation. For this reason some resin manufacturers prefer to use formalin with a high 7-10%) methanol content. 

Since both phenol and acetone are available and the bis-phenol A is easy to manufacture, this intermediate is comparatively inexpensive. This is one of the reasons why it has been the preferred dihydric phenol employed in epoxide resins manufacture. Since most epoxide resins are of low molecular weight and because... 

In this section the rosins and rosin derivative resins, coumarone-indene and hydrocarbon resins, polyterpene resins and phenolic resins will be considered. The manufacture and structural characteristics of natural and synthetic resins will be first considered. In a second part of this section, the characterization and main properties of the resins will be described. Finally, the tackifier function of resins in rubbers will be considered. 

There was significant interest in developing commercial processes based on phenolic resins in the 1890-1910 era. By this time, cellulose nitrate, vulcanized rubber, and viscose rayon had all found places in commerce [24]. Smith patented processes for manufacture of commercially useful molded articles from phenolic in 1899-1900 [2,25-28]. His products were made with phenol, paraldehyde (2,4,6-trimethyl-1,3,5-trioxane) or parafonnaldehyde, and additives in the presence of HCl at elevated temperatures. 

By far the preponderance of the 3400 kt of current worldwide phenolic resin production is in the form of phenol-formaldehyde (PF) reaction products. Phenol and formaldehyde are currently two of the most available monomers on earth. About 6000 kt of phenol and 10,000 kt of formaldehyde (100% basis) were produced in 1998 [55,56]. The organic raw materials for synthesis of phenol and formaldehyde are cumene (derived from benzene and propylene) and methanol, respectively. These materials are, in turn, obtained from petroleum and natural gas at relatively low cost ([57], pp. 10-26 [58], pp. 1-30). Cost is one of the most important advantages of phenolics in most applications. It is critical to the acceptance of phenolics for wood panel manufacture. With the exception of urea-formaldehyde resins, PF resins are the lowest cost thermosetting resins available. In addition to its synthesis from low cost monomers, phenolic resin costs are often further reduced by extension with fillers such as clays, chalk, rags, wood flours, nutshell flours, grain flours, starches, lignins, tannins, and various other low eost materials. Often these fillers and extenders improve the performance of the phenolic for a particular use while reducing cost. 

It is traditional to divide phenolics into two main categories. These are novolacs and resoles. This system of classification is consistent with the division of applications as well as the compositions and conditions of resin manufacture. Novolacs are used primarily in the molding industries and electronics applications. Resoles are used primarily as binders for other materials. 

Historically, the outbreak of the first World War provided a stimulus for the industrial preparation of large amounts of synthetic phenol, which was needed as a raw material to manufacture the explosive picric acid (2,4,6-trinitrophenol). Today, more than 2 million tons of phenol is manufactured each year in the United States for use in such products as Bakelite resin and adhesives for binding plywood. 

The basic materials are sufficiently stable in sulfuric acid not to require the expensive phenolic resin impregnation. Traces of adhesive are applied to hold the glass mat in order to achieve the total thickness. This separation system may be expensive to manufacture, a fact certainly largely balanced by savings in positive active mass, but it also has some indisputable advantages. 

Heterogeneous catalysts, particularly zeolites, have been found suitable for performing transformations of biomass carbohydrates for the production of fine and specialty chemicals.123 From these catalytic routes, the hydrolysis of abundant biomass saccharides, such as cellulose or sucrose, is of particular interest. The latter disaccharide constitutes one of the main renewable raw materials employed for the production of biobased products, notably food additives and pharmaceuticals.124 Hydrolysis of sucrose leads to a 1 1 mixture of glucose and fructose, termed invert sugar and, depending on the reaction conditions, the subsequent formation of 5-hydroxymethylfurfural (HMF) as a by-product resulting from dehydration of fructose. HMF is a versatile intermediate used in industry, and can be derivatized to yield a number of polymerizable furanoid monomers. In particular, HMF has been used in the manufacture of special phenolic resins.125... 

---