Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cytec-Fiberite

Prototype fuselage panel by Cytec Fiberite carbon fibre reinforced PEEK and PEI. [Pg.842]

The authors wish to thank Cytec Fiberite Pic and Dr. D.R. Moore (ICI Pic) for the supply of materials and Mr Christian Murphy (Imperial College London) and Dr D.D.R. Cartie (Cranfield University) for the contribution of test data and photographs. Comments by Dr. M. Barbezat (EMPA) are also gratefully acknowledged. [Pg.444]

BP Chemicals (Hitco) Inc., Gardena, California, USA—British Petroleum (BP), UK acquired Bristol Composite Materials in 1979, but sold to GKN-Westland in 1997. In 1986, acquired Hitco from Owens Corning and sold to SGL Carbon in 1997. BP Amoco s carbon fiber business was sold to Cytec Fiberite in September, 2001. [Pg.1121]

Cytec Fiberite Occidental Chemical Plastics Engineering Company Plaslok Corporation Rogers Corporation... [Pg.155]

Major suppliers of epoxy resins include Akzo Nobel Chemical Inc. Ciba Specialty Chemicals Cytec Fiberite Inc. Dow Plastics Epic Resins Magnolia Plastics Inc. Resyn Corp. Shell Chemicals Thermoset Plastics, Inc. Union Carbide Corp. and United Resin Corp. [Pg.164]

Phenolic resins are available in various grades for compression, transfer, and injection molding. Major suppUers of phenolic resins include Cytec Fiberite (Enduron), Occidental (Durez), Plastics Engineering (Plenco), Lockport (Valite), Plaslok, Rogers, and Resinoid. [Pg.399]

Silicone molding compounds are available as compression, injection molding, extrusion, and transfer molding grades. Major suppliers include Dow Coming, GE Silicones, Bayer (Baysilone), Transene, Cytec Fiberite, and Wacker... [Pg.508]

Electronic Electronic Cytec Fiberite Cytec Fiberite... [Pg.641]

Cytec Fiberite Cytec Fiberite Emerson ETW Devcon... [Pg.641]

Cytec Fiberite Patent Plastics Perstorp Plastics Mfg. [Pg.653]

Cytec Fiberite Cytec Fiberite Amoco Amoco... [Pg.653]

Cytec Fiberite Bayer Corp. Amoco Electronic ... [Pg.653]

Cylon, Prepregs, thermoplastic and thermoset, Cytec Fiberite Inc. [Pg.900]

Endnron, Phenolic sheet molding compound, Cytec Fiberite Molding Compounds... [Pg.905]

U.S. phenolic resin manufacturers include Ashland, Borden Chemical, Cytec Fiberite, Durez, FiberCote Industries, H.B. Fuller, P.D. George, Georgia-Pacific,... [Pg.5525]

At the time of going to press the future of this company remains unsure, although likely on the latest evidence to be acquired by Cytec Industries Inc. of West Paterson, NJ, USA, and to be called Cytec Fiberite Inc. Hence known contact addresses for both Fiberite and C] ec Industries Inc have been included in the Directory section. [Pg.120]

When the substrate was reinforced with carbon fibre, the plateau results obtained depended heavily on the type of adhesive being used Cytec-Fiberite film adhesive FM -73M (curing at 120°C) and room-temperature curing Loctite Aerospace paste adhesive EA 9309. The composite matrix chemistry exerted significantly less influence. [Pg.205]

The laminates consist of alternate layers aluminium (0.2-0.5 mm thick], which has been anodised and then primed with Cytec-Fiberite s BR-127 corrosion-inhibiting primer, bonded together with fibre-rich, epoxy-based adhesive-prepregs (about 0.125 mm thick]. The reinforcing fibre is usually unidirectional in nature, although woven fabric is occasionally used. Generally two or three sheets of adhesive separate each sheet of aluminium this can be in the 0° direction or laid up in a cross-plied orientation. [Pg.246]

Phenolic-epoxy adhesives were developed in the mid-1950s by Ciba (ARL) Limited (now Hexcel Composites) and American Cyanamid (now Cytec-Fiberite). These phenolic-epoxy formulations were initially developed for bonding components exposed to a much higher service temperature than the 70°C limit for Redux 775. [Pg.300]

Although the Hidux range has long since been withdrawn the Cytec-Fiberite, HT -424, is still on the market. A brief examination of some of the current areas of application shows how advanced the phenolic-epoxy adhesives were for their time. These include the flight control surfaces on the B 52 bomber and the Sidewinder missile, components within the navigation base of the Space Shuttle, applications within the Motorola Mk 45 missile and the wings on the Teledyne Ryan Firebrand missile. [Pg.301]

Phenolic-epoxy structural adhesives for the aerospace industry are available [33] from Cytec-Fiberite. [Pg.301]

See other pages where Cytec-Fiberite is mentioned: [Pg.434]    [Pg.38]    [Pg.1123]    [Pg.1123]    [Pg.149]    [Pg.1159]    [Pg.561]    [Pg.561]    [Pg.562]    [Pg.591]    [Pg.641]    [Pg.653]    [Pg.653]    [Pg.655]    [Pg.701]    [Pg.701]    [Pg.703]    [Pg.705]    [Pg.733]    [Pg.900]    [Pg.932]    [Pg.5]    [Pg.18]    [Pg.245]    [Pg.152]    [Pg.156]    [Pg.216]   
See also in sourсe #XX -- [ Pg.246 , Pg.256 , Pg.317 , Pg.321 , Pg.323 ]



SEARCH



Cytec

© 2024 chempedia.info