Main Objectives

When the main object of the absorption is to remove impurities these columns are often referred to as scrubbers. ... 

The reservoir section is more consolidated and is the main objective to which the well is being drilled, hence the drilling process has to ensure that any productive interval is not damaged. 

Assessing the effectiveness and reliability of Acoustic Emission (AE) in continuous, on-line monitoring of the structural integrity of critical thermal power plant components, such as steam headers and steamline sections, is the main objective of the work reported in this paper. This is part of the work carried within the BRITE - EURAM 6056 "SIMON" Project from 10.1993 to 9.1997 with the support of the EU Commission. The "SIMON" Project Consortium included CISE [I, coordinator], MITSUI BABCOCK ENERGY [UK] HERIOT WATT University [UK], PROET / EDP[P]andENEL[I],... 

A Real Time X-Ray Inspection System is introduced to replace Film X-Ray. The main objective is to reduce the consumption of film and to reduce the environmental pollution due to lead intensifying screens and chemicals. Other benefits are the reduction of space to storage X-ray data and the shorter inspection time, which gives a faster feed back to production. 

The main objective of a structure model is to produce an image ol a molecule that invokes 3D information although it is physically two-dimensional. Additional lighting effects (such as shadows on the objects of the structure) may enhance... 

Many industrial processes involve a chemical reaction between two Hquid phases, for example nitration (qv), sulfonation (see Sulfonation and sulfation), alkylation (qv), and saponification. These processes are not always considered to be extractions because the main objective is a new chemical product, rather than separation (30). However these processes have many features in common with extraction, for example the need to maintain a high interfacial area with the aid of agitation and the importance of efficient phase separation after the reaction is completed. 

In addition to the Hquid—Hquid reaction processes, there are many cases in both analytical and industrial chemistry where the main objective of separation is achieved by extraction using a chemical extractant. The technique of dissociation extraction is very valuable for separating mixtures of weakly acidic or basic organic compounds such as 2,4-dichlorophenol [120-83-2] and 2,5-dichlorophenol [583-78-8] which are difficult to separate by... 

Industrial screening is used essentially for separations over 0.2 mm and in conjunction with cmshers because the efficiency decreases rapidly as particle size decreases. The main objective is to remove undersize material that should not be circulated back to the cmshers, or to remove (scalp) oversize material or trash that should not report to the subsequent processing step. Other appHcations of screening include production of a specification size material (as in quarrys), dewatering, and trash removal from processed material. 

Although the size separation/classification methods are adequate in some cases to produce a final saleable mineral product, in a vast majority of cases these produce Httle separation of valuable minerals from gangue. Minerals can be separated from one another based on both physical and chemical properties (Fig. 8). Physical properties utilized in concentration include specific gravity, magnetic susceptibility, electrical conductivity, color, surface reflectance, and radioactivity level. Among the chemical properties, those of particle surfaces have been exploited in physico-chemical concentration methods such as flotation and flocculation. The main objective of concentration is to separate the valuable minerals into a small, concentrated mass which can be treated further to produce final mineral products. In some cases, these methods also produce a saleable product, especially in the case of industrial minerals. 

The main objectives of RCRA ate to protect pubHc health and the environment and to conserve natural resources. The act requires EPA to develop and adininistet the following programs soHd waste disposal practices providing acceptable protection levels for pubHc health and the environment transportation, storage, treatment, and disposal of hazardous wastes practices that eliminate or minimize hazards to human health and the environment the use of resource conservation and recovery whenever technically and economically feasible and federal, state, and local programs to achieve these objectives. 

The main objection to the venture-premium method is that the assessment of the riskiness of a project may be too subjective. This could lead to the rejec tion of potentially attractive proposals and the acceptance of projects that merely appear to be risk-free. 

The main objective for calculating the number of theoretical stages (or mass-transfer units) in the design of a hquid-liquid extraction process is to evaluate the compromise between the size of the equipment, or number of contactors required, and the ratio of extraction solvent to feed flow rates required to achieve the desired transfer of mass from one phase to the other. In any mass-transfer process there can be an infinite number of combinations of flow rates, number of stages, and degrees of solute transfer. The optimum is governed by economic considerations. 

Once the options have been clearly defined it will be necessary to carry out a cost-benefit analysis of each option. This has two main objectives. First, the overall cost of the project will need to be assessed to determine whether or not it is financially viable and, second, to ensure that those who will be required to incur expenditure are fully aware of the commitment needed. The financial benefits to users of the waters for recreation, fisheries, navigation, etc., are relatively easy to determine, but monetary valuation of the environmental benefits such as conservation and general amenity will be more difficult to define. As yet this aspect of the cost-benefit analysis has not been fully developed in the UK. Having determined a range of options and costs for eutrophication control in a particular catchment, consultation on the details of the Action plan with all those involved is needed before any plan can be implemented. 

The addition of cathodically active elements to pure lead was the main objective of investigations to improve its corrosion resistance to H2SO4 [42,44]. Best known is copper-lead with 0.04 to 0.08% Cu. By adding combinations of alloying elements, it was possible to produce lead alloys that not only had much better corrosion resistance, but also had greater high-temperature strength. Lead alloy with 0.1% Sn, 0.1% Cu and 0.1% Pd is an example [45]. 

Liquid production is usually the main objective of any gas plant. Reductions in liquid production result in reductions in plant revenue. Revenue reduction is a major concern and is often what initiates a redesign project. 

The estimator s main objective should be to include all the known costs and keep the contingency for unknown and unexpected items to a reasonable level. 

The main objective of air quality guidelines and standards is the protection of human health. Since fme particulates (PM,) are more likely to cause adverse health effects than coarse particulates, guidelines and standards referring to fine particulate concentrations are preferred to those referring to TSP, which includes coarse particulate concentrations. Scientific studies provide ample evidence of the relationship between exposure to short-term and long-term ambient particulate concentrations and human mortality and morbidity effects. However, the dose-response mechanism is not yet fully understood. Furthermore, according to the WHO, there is no safe threshold level below which health damage does not occur. 

In determining the proper size and number of cyclones required for a given application, two main objectives must be considered. The first is the classification or separation that is required, and the second is the volume of feed slurry to be handled. In the case of hydroclones, before determining whether these objectives can be achieved, it is necessary to establish a base condition as follows Feed liquid - water at 20 C. Feed solids - spherical particles of 2.65 specific gravity Feed concentration - less than 1 % solids by volume Pressure drop - 69 kPa (10 psi) Cyclone geometry - "standard cyclone" as described above. 

Many other combinations exist but will not be described here. In small cabins, for storage or work, it is possible to supply and exhaust air in a controlled way to have a defined climate. There are also special sluices, where air is used to rinse the clothes from settled contaminants before a person proceeds to the next, cleaner room. In this case, very high air velocities are used, which could cause discomfort to the person. The residence time for the person usually is less than a couple of minutes and the main objective is to clean the clothes (and sometimes the skin) and therefore the high velocities do not matter. 

The main object in reducing carbonyl derivatives is to perform the overall transformation ... 

Panagiotopoulos et al. [16] studied only a few ideal LJ mixtures, since their main objective was only to demonstrate the accuracy of the method. Murad et al. [17] have recently studied a wide range of ideal and nonideal LJ mixtures, and compared results obtained for osmotic pressure with the van t Hoff [17a] and other equations. Results for a wide range of other properties such as solvent exchange, chemical potentials and activity coefficients [18] were compared with the van der Waals 1 (vdWl) fluid approximation [19]. The vdWl theory replaces the mixture by one fictitious pure liquid with judiciously chosen potential parameters. It is defined for potentials with only two parameters, see Ref. 19. A summary of their most important conclusions include ... 

Zeeuwen et al. (1983) observed the atmospheric dispersion and combustion of large spills of propane (1000-4000 kg) in open and level terrain on the Musselbanks, located on the south bank of the Westerscheldt estuary in The Netherlands. Thermal radiation effects were not measured because the main objective of this experimental program was to investigate blast effects from vapor cloud explosions. 

In this fashion, the way in which the workers reach decisions and deal with problems can be recorded. The problem with this technique is that the representation of the event is artificial and this may distort the data collection. The main objection is that the information offered to the worker is usually limited to easily identified information sources. It is quite feasible that workers can encode several sources of information in a display in a quite novel way which they cannot describe and which the analyst cannot anticipate. 

The main objective of the In-Plant Reliability Data System (IPRDS) was to develop a comprehensive and component-specific data base for PRA and other component reliability-related statistical analysis. Data base personnel visited selected plants and copied all the plant maintenance wor)c requests. They also gathered plant equipment lists and plant drawings and in some cases interviewed plant personnel for Information on component populations and duty cycles. Subsequently, the maintenance records were screened to separate out the cases of corrective maintenance applying to particular components these were reviewed to determine such things as failure modes, severity, and, if possible, failure cause. The data from these reports were encoded into a computerized data base. 

Since a considerable amount of review articles on both theoretical frameworks and calculated results have been reported[15-25], the main objective of the present study is placed on the comparisons with experimental results. The organization of the present report is as follows In the next section, for the sake of completeness, a brief theoretical description of the PPM is summarized from the previous articles. In the third section, disorder-LIq transition is focused and visualized atomic (spin) configuration is compared with recent high resolution electron micrograph. In the fourth section, ordering relaxation... 

The main objective of a shutdown is to accomplish, at the lowest possible costs, the maximum quality and quantity of work that can be completed within a limited time, defined as the outage. Shutdown activities should be concentrated on work that can only be performed during shutdown or when production systems are idle. A well-organized and adequately planned and scheduled shutdown is the best insurance for lower maintenance and high reliability of equipment. 

---