Low-temperature performance

Tris(2-ethylhexyl) phosphate shows good compatibiUty with PVC and also imparts good low temperature performance in addition to good fire retardancy. 2-Ethyhexyl diphenyl phosphate has widespread use in dexible PVC appHcations due to its combination of properties of plasticizing efficiency, low temperature performance, migration resistance, and fire retardancy. 

The iatroduction of a plasticizer, which is a molecule of lower molecular weight than the resia, has the abiUty to impart a greater free volume per volume of material because there is an iucrease iu the proportion of end groups and the plasticizer has a glass-transition temperature, T, lower than that of the resia itself A detailed mathematical treatment (2) of this phenomenon can be carried out to explain the success of some plasticizers and the failure of others. Clearly, the use of a given plasticizer iu a certain appHcation is a compromise between the above ideas and physical properties such as volatiUty, compatibihty, high and low temperature performance, viscosity, etc. This choice is appHcation dependent, ie, there is no ideal plasticizer for every appHcation. 

Low Temperature Performance. The abihty of plasticized PVC to remain flexible at low temperatures is of great importance in certain apphcations, eg, external tarpaulins or underground cables. Eor this property the choice of the acid constituent of the plasticizer ester is also important. The linear aUphatic adipic, sebacic, and azeleic acids give excellent low temperature flexibiUty compared to the corresponding phthalates and trimeUitates (Pig. 3). 

In the same way that natural mbber is predominandy used in blends, it is also predominandy used in tire manufacture. Its excellent building tack, low heat buildup, low rolling resistance, and good low temperature performance make it the polymer of choice for many parts of tire constmction, for both passenger and tmck vehicles. The effects of radiali2ation and demand for low rolling resistance and good low temperature performance have all tended to benefit natural mbber, especially in tmck tire constmction, as shown in Table 9. 

The choice of macrodiol influences the low temperature performance, whereas the modulus, ie, hardness, stiffness, and load-beating properties, increases with increasing hard-segment content. 

In cases where the copolymers have substantially lower glass-transition temperatures, the modulus decreases with increasing comonomer content. This results from a drop in crystallinity and in glass-transition temperature. The loss in modulus in these systems is therefore accompanied by an improvement in low temperature performance. However, at low acrylate levels (< 10 wt %), T increases with comonomer content. The brittle points in this range may therefore be higher than that of PVDC. 

By selection of those chlorinated paraffins specifically developed for the PVC industry to match the properties of primary plasticizers, reductions in costs can be achieved without significant change in properties. However, certain aspects can be improved by the inclusion of chlorinated paraffin such as flame resistance, chemical and water resistance, low temperature performance, and the viscosity aging stabiUty in plastisols. 

Introduction of linear low density polyethylene in the 1970s and 1980s offered yet another design parameter, giving chlorosulfonated products with the advantages of linear types but with improved low temperature performance (8). 

A.C7ylonitnk Content. Standard grades available ia the market contain between 15 to 50% acrylonitrile. The acrylonitrile content of nitrile mbber has a significant effect on two properties chemical resistance and low temperature performance. As the acrylonitrile content of the polymer is iacreased, the chemical resistance is improved whereas the low temperature properties are diminished. 

The polarity of the polyethers makes them incompatible with hydrocarbon-type plasticizers, which tend to bleed. Effective plasticizers are ethers such as di(butoxyethoxyethyl)formal [143-29-3] (Thiokors TP-90B), esters such as di(2-ethylhexyl) phthalate [117-81-7] dioctyl phthalate (DOP), polyesters such as Paraplex G50 (Rohm and Haas), and ether—esters such as di(butoxyethoxyethyl) adipate [114-17-3] (Thiokol s TP-95). The lower mol wt plasticizers, DOP, TP-90B, and TP-95 improve vulcanizate low temperature performance. The polymeric plasticizers maintain higher temperature and long-term aging properties. Epoxidized plasticizers should be avoided because they interfere with vulcanization. 

Plasticizers can be classified according to their chemical nature. The most important classes of plasticizers used in rubber adhesives are phthalates, polymeric plasticizers, and esters. The group phthalate plasticizers constitutes the biggest and most widely used plasticizers. The linear alkyl phthalates impart improved low-temperature performance and have reduced volatility. Most of the polymeric plasticizers are saturated polyesters obtained by reaction of a diol with a dicarboxylic acid. The most common diols are propanediol, 1,3- and 1,4-butanediol, and 1,6-hexanediol. Adipic, phthalic and sebacic acids are common carboxylic acids used in the manufacture of polymeric plasticizers. Some poly-hydroxybutyrates are used in rubber adhesive formulations. Both the molecular weight and the chemical nature determine the performance of the polymeric plasticizers. Increasing the molecular weight reduces the volatility of the plasticizer but reduces the plasticizing efficiency and low-temperature properties. Typical esters used as plasticizers are n-butyl acetate and cellulose acetobutyrate. 

EVA-based adhesives machine more cleanly and are less expensive. For optimum lay-flat and low temperature performance, moisture-curing polyurethane-... 

Phenolic-neoprene contact cements are used for structural metal-metal bonding. especially where fatigue resistance and low temperature performance are important [209]. They are also used for bonding textiles, wood, rubbers, plastics, ceramics, and glass to metal and to one another. Solvent toxicity and flammability has greatly reduced the use of contact cements in the wood products industry. Water-based contact cements persist, but generally do not perform as well as the solvent systems, thus allowing market erosion by alternative binders. 

Paraffinic oils are the least efficient as processing additives but the resulting vulcanizates have good aging and color retention properties and give the best low temperature performance. 

The hydroisomerization of heavy linear alkanes is of a great interest in petroleum industry. Indeed, the transformation of long chain n-alkanes into branched alkanes allows to improve the low temperature performances of diesel or lubricating oils [1-3]. On bifunctional Pt-exchanged zeolite catalysts, n-CK, transformed into monobranched isomers, multibranched isomers and cracking products [4], The HBEA zeolite based catalyst was more selective for isomerization than those containing MCM-22 or HZSM-5 zeolites [4], This was explained on one hand by a rapid diffusion of the reaction intermediates inside the large HBEA channels, and on the other hand by the very small crystallites size of this zeolite (0.02 pm). 

The absence of any polar grouping gives this material superior low temperature performance when compared to the epichlorohydrin terpolymers, but this is at the expense of oil resistance. The unsaturated nature of the main chain confers excellent resistance to oxygen, ozone and UV light. 

Little comment can be made on the uses of this material except that it is used in some mouldings where the advantages of heat resistance, low temperature performance and oil resistance, roughly equivalent to that of polychloroprene, can be utilised. It has been investigated for use in engine mounts and transmission belting. 

These grades give superior low temperature performance. Commercial grades are generally peroxide curable. 

High heat resistance and oil resistance. Superior low temperature performance when compared to the other fluorocarbon types. Self extinguishing. Relatively poor cold performance. High cost. 

The thermoplastic polyurethanes are available in a more limited hardness range than the styrenics, and are characterised by excellent strength and toughness, and oil resistance. Of the two major types available, polyester (TPAU) and polyether (TPEU), the latter exhibits superior hydrolytic stability and low temperature performance. 

As well as aiding processing, a major function of plasticisers is to extend the operating temperature range by improving low temperature flexibility. The majority of demand in CR and NBR is satisfied by general purpose phthalate plasticisers di-2-ethylhexyl phthalate (DEHP), diisononyl phthalate (DINP) and diisodecyl phthalate (DIDP). However, a wide variety of speciality plasticisers, mainly esters, are marketed within the rubber industry. The majority of these have linear molecular structures giving them better low temperature performance than the phthalates. Examples of such plasticisers are di-2-ethylhexyl adipate (DOA), butyl carbitol adipate, di(butoxyethoxyethyl) adipate (BCA), and di-2-ethylhexyl sebacate (DOS). 

Cost The cost of the battery is determined by the materials used in its fabrication and the manufacturing process. The manufacturer must be able to make a profit on the sale to the customer. The selling price must be in keeping with its perceived value (tradeoff of the ability of the user to pay the price and the performance of the battery). Alkaline primary Zn—MnOz is perceived to be the best value in the United States. However, in Europe and Japan the zinc chloride battery still has a significant market share. In developing countries, the lower cost Leclanche carbon—zinc is preferred. Likewise, lead acid batteries are preferred for automobile SLI over Ni—Cd with superior low-temperature performance but with a 10 times higher cost. 

With few exceptions, these new electrolyte solvents focus on possible improvements in low-temperature performance, while new salts are intended to offer higher thermal stability. This divided directions of pursuit after the targeted improvements is apparently created by the fact that solvent and salt, respectively, impose the upper and lower temperature limits of the current state-of-the-art electrolytes. 

II = CHa, CH2CH3, CH2CH2CH3, CH2CF3 = CH2CF3, CH(CF3)2 fluorinated carbonates Better low-temperature performance better SEI-formation ability lower inflammability. 466... 

---