Electrolytes, cadmium potassium

The nickel—cadmium cell (nicad cell) is a conunou storage battery. It is a voltaic cell consisting of an anode of cadmium and a cathode of hydrated nickel oxide (approximately NiOOH) on nickel the electrolyte is potassium hydroxide. Nicad batteries are used in calculators, portable power tools, shavers, and toothbrushes. The half-cell reactions during discharge are... 

An interesting application of these results is to the direct quantitative separation of copper and cadmium. The copper is first deposited in acid solution the solution is then made slightly alkaline with pure aqueous sodium hydroxide, potassium cyanide is added until the initial precipitate just re-dissolves, and the cadmium is deposited electrolytically. 

Pipette lOmL of a cadmium sulphate solution (1.0gCd2+ L-1) into a 100 mL graduated flask, add 2,5 mL of 0.2 per cent gelatin solution, 50 mL of 2 M potassium chloride solution and dilute to the mark. The resulting solution (A) will contain 0.100gCd2+ L-1 in a base solution (supporting electrolyte) of 1 M potassium chloride with 0.005 per cent gelatin solution as suppressor. 

In acidic electrolytes only lead, because it forms passive layers on the active surfaces, has proven sufficiently chemically stable to produce durable storage batteries. In contrast, in alkaline medium there are several substances basically suitable as electrode materials nickel hydroxide, silver oxide, and manganese dioxide as positive active materials may be combined with zinc, cadmium, iron, or metal hydrides. In each case potassium hydroxide is the electrolyte, at a concentration — depending on battery systems and application — in the range of 1.15 - 1,45 gem"3. Several elec-... 

In 1899, the nickel-cadmium battery, the first alkaline battery, was invented by a Swedish scientist named Waldmar Jungner. The special feature of this battery was its potential to be recharged. In construction, nickel and cadmium electrodes in a potassium hydroxide solution, it was the first battery to use an alkaline electrolyte. This battery was commercialized in Sweden in 1910 and reached the Unites States in 1946. The first models were robust and had significantly better energy density than lead-acid batteries, but nevertheless, their wide use was limited because of the high costs. 

Subcategory A encompasses the manufacture of all batteries in which cadmium is the reactive anode material. Cadmium anode batteries currently manufactured are based on nickel-cadmium, silver-cadmium, and mercury-cadmium couples (Table 32.1). The manufacture of cadmium anode batteries uses various raw materials, which comprises cadmium or cadmium salts (mainly nitrates and oxides) to produce cell cathodes nickel powder and either nickel or nickel-plated steel screen to make the electrode support structures nylon and polypropylene, for use in manufacturing the cell separators and either sodium or potassium hydroxide, for use as process chemicals and as the cell electrolyte. Cobalt salts may be added to some electrodes. Batteries of this subcategory are predominantly rechargeable and find application in calculators, cell phones, laptops, and other portable electronic devices, in addition to a variety of industrial applications.1-4 A typical example is the nickel-cadmium battery described below. 

A nicad cell has a cadmium electrode and another electrode that contains nickel(lll) oxyhydroxide, NiO(OH). When the cell is discharging, cadmium is the anode. When the cell is recharging, cadmium is the cathode. The electrolyte is a base, sodium hydroxide or potassium hydroxide. 

Phenylacetamide has been obtained by a wide variety of reactions from benzyl cyanide with water at 250-260° 6 from benzyl cyanide with water and cadmium oxide at 240° 6 from benzyl cyanide with sulfuric acid 7 8 by saturation of an acetone solution of benzyl cyanide with potassium hydrosulfide 9 from benzyl cyanide with sodium peroxide 10 by electrolytic reduction of benzyl cyanide in sodium hydroxide 11 from ethyl phenyl-acetate with alcoholic 12 or aqueous 13 ammonia from phenyl-acetic acid with ammonium acetate 14 or urea 15 from diazoacetophenone with ammoniacal silver solution 16 from phenyl-acetic acid imino ether hydrochloride and water 17 from acetophenone with ammonium poly sulfide at 215° 18 from benzoic acid 19 and by heating the ammonium salt of phenyl-acetic acid.20... 

As in the nickel-cadmium cell, the electrolyte is concentrated potassium hydroxide. Depending on the metal alloy used, the emf has a value usually in the range 1.32-1.35 V, which turns out to be almost the same as that of the nickcl-cadmium cell. Note that the electrolyte composition is completely invariant during cycling. Unlike the situation with the nickel-cadmium cell, water is not involved in the cell reaction. 

The rechargeable nickel-cadmium (Ni-Cad) batteries are used in a variety of cordless appliances such as telephones, battery operated tools, and portable computers. During discharge, cadmium metal (Cd) acts as the anode, and nickel dioxide (Ni02) as the cathode. Both metals form insoluble hydroxides due to the presence of the potassium hydroxide electrolyte. The cell reaction during discharge is... 

Ni-Cd cells — The nickel-cadmium cell is a secondary - battery that has a nominal cell potential of 1.20-1.25 V. The negative electrode comprises nickel hydroxide-nickel oxyhydroxide, the positive electrode is cadmium, and the electrolyte solution is based on aqueous potassium hydroxide (KOH, 32% in water). At the anode, the discharge reaction is the oxidation of cadmium metal to cadmium hydroxide with the release of two electrons [i] ... 

A metal hydride battery similar to the nickel-cadmium battery has been developed by Sharp corporation. The battery is shaped in the form of a button of 20 mm diameter and can give 1.2 V. The anode in the battery is made of La-Ni-Sn alloy hydride, and the cathode is nickel oxide. Potassium hydroxide solution in polyamide-resin is the electrolyte. The battery exhibits high energy density (i.e.) 1.5 to 2.0 times that of the Ni-Cd battery, good cycling life and superior low temperature behaviours. 

In 1899, Waldmar Jungner (Sweden) invented the nickel-cadmium battery (Ni/Cd) [6]. The battery used nickel for the cathode, cadmium for the anode, and an aqueous solution of potassium hydroxide for the electrolyte. The applications of these batteries were limited because of the high cost of the materials compared to other battery systems (lead acid). In 1901, Edison (USA) modified the design of the battery by replacing the anode material with iron [7]. This design is known as the... 

Nickel-cadmium (Ni-Cd) batteries were invented in 1899 by Jungner. They use nickel hydroxide as cathode active material, cadmium and iron as anode, and an aqueous solution of potassium hydroxide as electrolyte. Materials such as polystyrene, nonwoven nylon, and cellulose are used as... 

Nickel-cadmium batteries use a hydrate nickel oxide as positive electrode, a metallic cadmium as negative electrode and an aqueous solution of potassium hydroxide as electrolyte [17]. The production of electrons at the negative plate during discharge occurs via the following semi-reaction ... 

Nickel hydroxide, NiO(OH), is the active cathode material, cadmium, Cd, is the active anode material, and aqueous potassium hydroxide, KOH, is the electrolyte. 

The positive electrode, the cathode, is similar to that in nicad cells and consists of a mixture of NiO(OH)/Ni(OH)3 and Ni(OH)2. An alloy that supports hydride formation replaces the cadmium as the negative anode. The alloy most commonly used is derived from LaNis, in which a mixture of other lanthanides replaces the lanthanum, and a nickel-rich alloy replaces the nickel, to give a general formula LnA/5. The anode is composed of an agglomeration of alloy powder. A small amount of potassium hydroxide is added as an electrolyte. The cell voltage is 1.3 V, making these cells suitable for the direct replacement of nicad batteries. The cell construction is identical to that of the nicad cell (Figure 9.10), with the cadmium replaced by metal hydride. The approximate cell reactions are as follows. 

Batteries that require a liquid electrolyte are called wet batteries. Corrosive battery fluid refers to either acid electrolytes syn. battery acid, like the common lead-acid automobile battery which uses a solution of sulphuric acid, or alkali electrolytes syn. alkaline corrosive battery fluid, like potassium hydroxide (1310-58-3) solutions in nickel-cadmium and other alkaline battery systems. Dry batteries or dry cells, like all primary batteries, use electrolytes immobilized in pastes, gels, or absorbed into separator materials. Some batteries are loaded with a dry, solid chemical (e.g., potassium hydroxide) which is diluted with water to become a liquid electrolyte. The hazards associated with handling and transportation prior to use are thereby reduced. 

The negative electrodes in nickel-cadmium batteries are made up of finely distributed cadmium. The positive electrodes are composed of Ni(III) oxide hydroxide (with graphite or Ni powder added to enhance the conductivity). The electrolyte is usually a 20 % potassium hydroxide solution. 

---