Sugar composition

B. Quemener, M. Lahaye, and F. Metro, Assessment of methanolysis for the determination of composite sugars of gelling carrageenans and agarose by HPLC, Carbohydr. Res., 266 (1995) 53-64. 

Ester formation is associated with yeast growth in the early phase of fermentation. Acetate esters are produced via the reaction between an alcohol and acetyl Co-A, which is catalysed by the enzyme alcohol acetyl transferases (ATFl and ATF2). Ethanol, branched-chain alcohols and 2-phenylethanol are the common moieties of acetate esters. Ethyl esters of medium-chain fatty adds are formed through the reaction between ethanol and respective fatty acyl Co-A, which is catalysed by the enzyme alcohol acyl transferases. Saccharomyces cerevisiae strains also produce esterases that hydrolyse esters, and thus the final concentration of esters in beers is the net balance between ester synthesis and hydrolysis. Strains of brewing yeasts produce predominantly ethyl esters of fatty acids, particularly ethyl octanoate, with relatively little formation of acetate esters. Ester production in beer is regulated by a number of factors such as yeast strain, temperature, hydrostatic pressure, wort composition, sugar type and concentration, type and amount of yeast-assimilable nitrogen, aeration, and unsaturated fatty acids (Hiralal, Olaniran, PiUay, 2014 Pires et al., 2014). 

In this study, we aimed at obtaining a heteropolysaccharide fraction in high yield by performing a hydrolytic pre-treatment step on wood chips followed by a room temperature extraction. Pre-treatment conditions involved acetic acid (AcOH), sulphur dioxide (SO2) and high temperature water. The isolated fractions were analysed for yield, chemical composition (sugars, uronic acids, and lignin) and molecular mass. 

Port-type ted dessert wines require skin contact time to extract the anthocyanins, but the fermentation must be short to retain the sugar level neat the 6—10% level desired. The winemaker cannot always achieve desired composition in individual lots. In order to teach the desired standard, it is necessary to make new lots to enable blending to that standard. The right volume of a tedder, less sweet wine will need to be made to bring to standard a lot with low color and mote sugar, for example, while keeping the alcohol also within the desired limits. 

Insulation Boa.rd. The panel products known as insulation board were the earliest commodity products made from fibers or particles in the composite panel area. These are fiber-base products with a density less than 500 kg/m. Early U.S. patents were obtained in 1915 and production began soon thereafter. The initial production used wood fiber as a raw material, but later products were made of recycled paper, bagasse (sugar cane residue), and straw. Schematics of the two major processes still ia use are shown ia Figure 4. 

Acetone was originally observed about 1595 as a product of the distillation of sugar of lead (lead acetate). In the nineteenth century it was obtained by the destmctive distillation of metal acetates, wood, and carbohydrates with lime, and pyrolysis of citric acid. Its composition was determined by Liebig and Dumas in 1832. 

LPC Product Quality. Table 10 gives approximate analyses of several LPC products. Amino acid analyses of LPC products have been pubhshed including those from alfalfa, wheat leaf, barley, and lupin (101) soybean, sugar beet, and tobacco (102) Pro-Xan LPC products (100,103) and for a variety of other crop plants (104,105). The composition of LPCs varies widely depending on the raw materials and processes used. Amino acid profiles are generally satisfactory except for low sulfur amino acid contents, ie, cystine and methionine. 

Most nuts for commercial use are characteri2ed by high oil and protein contents (see Proteins) as well as a low percentage of carbohydrates (qv). However, some varieties, mostly inedible tree nuts such as acorn, horse chestnut, and chufa, contain at least as much sugar and/or starch as protein. The edible water chestnut is also in this category, as is the cashew nut, which contains starch in addition to a rich store of oil. The proximate composition of a number of nuts and of some nut products are given in Table 2 (3). 

Composition. Molasses composition depends on several factors, eg, locality, variety, sod, climate, and processing. Cane molasses is generally at pH 5.5—6.5 and contains 30—40 wt % sucrose and 15—20 wt % reducing sugars. Beet molasses is ca 7.5—8.6 pH, and contains ca 50—60 wt % sucrose, a trace of reducing sugars, and 0.5—2.0 wt % raffinose. Cane molasses contains less ash, less nitrogenous material, but considerably more vitamins than beet molasses. Composition of selected molasses products is Hsted in Table 7. Procedures for molasses analysis are avadable (59). 

The elemental and vitamin compositions of some representative yeasts are Hsted in Table 1. The principal carbon and energy sources for yeasts are carbohydrates (usually sugars), alcohols, and organic acids, as weU as a few other specific hydrocarbons. Nitrogen is usually suppHed as ammonia, urea, amino acids or oligopeptides. The main essential mineral elements are phosphoms (suppHed as phosphoric acid), and potassium, with smaller amounts of magnesium and trace amounts of copper, zinc, and iron. These requirements are characteristic of all yeasts. The vitamin requirements, however, differ among species. Eor laboratory and many industrial cultures, a commercial yeast extract contains all the required nutrients (see also Mineral nutrients). 

---