Acetic ester

Clearly, the nex.t step will be to investigate the physicochemical effects, such as charge distribution and inductive and resonance effects, at the reaction center to obtain a deeper insight into the mechanisms of these biochemical reactions and the finer details of similar reactions. Here, it should be emphasized that biochemical reactions arc ruled and driven basically by the same effects as organic reactions. Figure 10.3-22 compares the Claisen condensation of acetic esters to acctoacctic esters with the analogous biochemical reaction in the human body. 

Lewis acid promoted condensation of silyl ketene acetals (ester enolate equiv.) with aldehydes proceeds via "open" transition state to give anti aldols starting from either E- or Z- enolates. 

Arylamino-2-chloroprop-2- enoic esters (72) obtained from 2-chloroaceto acetic ester (71) and arylamines, react with thiourea to yidd substituted 2-aminothiazoles (73), probably by initial nucleophilic substitution of the chloro atom of 72, followed by cyclization with loss of aniline (Scheme 33) (729). 

Thiazole carboxylic acid hydrazides were prepared in a similar way (444, 445). Thus by refluxing thioacetamide or thiobenzamide with y-bromoaceto acetic ester arylhydrazones (83) for several hours in alcohol the 4-carboxythiazole derivatives (84) listed in Table II-ll were obtained (Scheme 36) (656). This reaction is presumed to proceed via dehydration of the intermediate, thiazoline-S-oxide. 

One approach called enzymatic resolution, involves treating a racemic mixture with an enzyme that catalyzes the reaction of only one of the enantiomers Some of the most commonly used ones are lipases and esterases enzymes that catalyze the hydrol ysis of esters In a typical procedure one enantiomer of the acetate ester of a racemic alcohol undergoes hydrolysis and the other is left unchanged when hydrolyzed m the presence of an esterase from hog liver... 

Figure 3 shows the production of acetaldehyde in the years 1969 through 1987 as well as an estimate of 1989—1995 production. The year 1969 was a peak year for acetaldehyde with a reported production of 748,000 t. Acetaldehyde production is linked with the demand for acetic acid, acetic anhydride, cellulose acetate, vinyl acetate resins, acetate esters, pentaerythritol, synthetic pyridine derivatives, terephthaHc acid, and peracetic acid. In 1976 acetic acid production represented 60% of the acetaldehyde demand. That demand has diminished as a result of the rising cost of ethylene as feedstock and methanol carbonylation as the preferred route to acetic acid (qv). 

The nameplate capacities for acetaldehyde production for the United States in 1989 are shown in Table 5 (120). Synthetic pyridine derivatives, peracetic acid, acetate esters by the Tischenko route, and pentaerythritol account for 40% of acetaldehyde demand. This sector may show strong growth in some products but all of these materials maybe prepared from alternative processes. 

Bromohydrins can be prepared direcdy from polyhydric alcohols using hydrobromic acid and acetic acid catalyst, followed by distillation of water and acetic acid (21). Reaction conditions must be carehiUy controlled to avoid production of simple acetate esters (22). The raw product is usually a mixture of the mono-, di-and tribromohydrins. 

Fig. 1. Acetyl value and combined acetic acid for acetate esters of cellulose. Designations are as follows CA = acetate(DS = 2.4) CELL = cellulose(DS = 0) CTA = triacetate(DS = 3.0). Combined acetic acid (%) = 6005(DS)/( 159.1 + 43.04(DS)) acetyl value...

First,/)-hydroxybenzoic acid (HBA) and 6-hydroxy-2-naphthoic acid (HNA) are acetylated to produce the low melting acetate esters which are molten at 200°C. In an inert gas, the two monomers are melted together at 200°C. The temperature is raised to 250—280°C and acetic acid is coUected for 0.5 to 3 h. The temperature is raised to 280—340°C and additional acetic acid is removed in vacuum for a period of 10 to 60 min. The opalescent polymer melt produced is extmded through a spinning jet, foUowed by melt drawdown. The use of the paraUel offset monomer, acetylated HNA, results in the formation of a series of random copolyesters of different compositions, many of which faU within the commercially acceptable melting range of... 

In addition to high aqueous solubility (7% at 30°C and 38% at 100°C), HgCl2 is very soluble in methyl alcohol (53% at 36°C), ethyl alcohol (34% at 31°C), and amyl alcohol (ca 10% at 30°C). It also is soluble in acetone, formic acid, the lower acetate esters, and other polar organic solvents. 

Ced rwood. Many varieties of cedarwood oil are obtained from different parts of the world. They are produced mainly by steam distillation of chipped heartwood, but some are also produced by solvent extraction. The oils, which vary significantly ia chemical composition, are used ia perfumes as such, but the main uses are as distillation fractions and chemical derivatives. For the latter purposes the most used oils, which are similar ia composition, are from Texas ia the United States (Juniperus mexicand) and from China Cupressusfunebris). The principal constituents of these oils are cedrene [11028-42-5] (4), thujopsene [470-40-6] (5), and cedrol [77-53-2] (6). The first two of these are obtained together by distillation and used mostiy ia the form of acetylated derivatives. Cedrol is used as such and, to a greater extent, as its acetate ester. 

Although all four tocopherols have been synthesized as their all-rac forms, the commercially significant form of tocopherol is i7//-n7i a-tocopheryl acetate. The commercial processes ia use are based on the work reported by several groups ia 1938 (15—17). These processes utilize a Friedel-Crafts-type condensation of 2,3,5-trimethylhydroquinone with either phytol (16), a phytyl haUde (7,16,17), or phytadiene (7). The principal synthesis (Fig. 3) ia current commercial use iavolves condensation of 2,3,5-trimethylhydroquiQone (13) with synthetic isophytol (14) ia an iaert solvent, such as benzene or hexane, with an acid catalyst, such as ziac chloride, boron trifluoride, or orthoboric acid/oxaUc acid (7,8,18) to give the all-rac-reaction with acetic anhydride. Purification of tocopheryl acetate is readily accompHshed by high vacuum molecular distillation and rectification (<1 mm Hg) to achieve the required USP standard. 

Cellulose acetate ester plastics are produced largely in the United States, Western Europe, and Japan. World consumption is assumed to be approximately equivalent to production of cellulose ester plastics in these three regions. Courtesy of CEH Estimates. 

Biodegradable film (148), foam-molding compositions, eg, sponges (149), tobacco substitutes (150), and microencapsulated dmg-deHvery systems (151) are potentially new and usefiil appHcations for ceUulose acetate esters. 

Esters of cinnamic acid are used more extensively than the acid itself, and can be converted to the acid by standard hydrolysis protocols. The Claisen condensation between benzaldehyde and the appropriate acetate ester provides a direct, high yield route to the simple esters. 

Ketene, like acid anhydrides, reacts with alcohols to form (acetate) esters ... 

The use of a catalytic quantity of alkah equivalent to only a small fraction of the acetate has the advantage that contamination of the poly(vinyl alcohol) with salts, which are difficult to remove, is minimized. A variant of the process is the use of a mixture of alcohol with the acetate ester produced by the alcoholysis as the alcoholyzing agent. This provides a means of controlling the completeness of removal of the acetate groups from the poly(vinyl acetate) (111). 

Methyl metacrylates, alcohols, aromatic and aliphatic carbohydrates, acetic ester acids are detected using he vapour-phase method. 

The benzoylformate ester can be prepared from the 3 -hydroxy group in a deoxy-ribonucleotide by reaction with benzoyl chloroformate (anh. Pyr, 20°, 12 h, 86% yield) it is cleaved by aqueous pyridine (20°, 12 h, 31% yield), conditions that do not cleave an acetate ester. ... 

The adamantoate ester is formed selectively from a primary hydroxyl group (e.g., from the 5 -OH in a ribonucleoside) by reaction with adamantoyl chloride, Pyr (20°, 16 h). It is cleaved by alkaline hydrolysis (0.25 N NaOH, 20 min), but is stable to milder alkaline hydrolysis (e.g., NH3, MeOH), conditions that cleave an acetate ester. ... 

Formate Ester 3. Acetate Ester 6. Trichloroacetate Ester 10. Phenoxyacetate Ester 19. Isobutyrate Ester... 

The most satisfactory derivatives for phenols that are of low molecular weight or monohydric are the benzoate esters. (Their acetate esters are generally liquids or low-melting solids.) Acetates are more useful for high molecular weight and polyhydric phenols. 

---