Safety and health communications

Cover means of communicating health and safety information m all workplaces. Include illuminated signs, alarms, verbal communication, fire safety signs, marking of pipework, etc. 

These Regulations cover various means of communicating health and safety information. As well as the use of signs, they set out minimum requirements for acoustic signals, verbal communication and hand signals. 

Are bulletin boards used to communicate health and safety issues ... 

Outline four advantages and four disadvantages of using propaganda posters to communicate health and safety information to the workforce. 

Explain why it is important to use a variety of methods to communicate health and safety information in the workplace. 

For examples see, for instance, A.C.Neal and F.B.Wright, The European Communities health and safety legislation (Chapman Hall, 1992). 

Source Health and Safety Executive, Common Topic 3 Safety Critical Communications, Health and Safety Executive, London, 2007, p. 4. Reproduced under the terms of the Click-Use Licence. 

A few key concepts should be kept in mind when selecting a labeling system. First, the selected label must be readable at a glance. Quick identification of basic information is usually essential, but it must be balanced by information content. Second, labels should be scalable such that they are not forced to change format or content simply because of size constraints. Third, the label must communicate health and safety... 

Dr. Carlyn Muir is a research fellow at the Monash Injury Research Institute, which incorporates the Monash University Accident Research Centre (MUARC). She is a psychologist whose doctoral research examined driver licensing policy for people following brain injury. She has been involved in the development and review of public health policy not only from a research perspective, but also through direct policy implementation within state health services. Dr. Muir s current research involves the design and implementation of a range of injury prevention and public health projects, with a focus on community health and safety, policy, and evaluation. She has published journal articles, book chapters, and government reports across the community safety space. 

No matter if subcontractors are working for a general or main contractor or working directly for the client, when two or more prime contractors conduct activities at the same worksite, it is prudent that a common basis for health and safety rules and controls be established. Wlien one contractor performs an intrusive activity that increases the hazard level for all workers at a worksite, that information should be communicated to other contractors to permit them to plan and control their activities accordingly. 

Flazardous waste sites are divided into as many or as few zones as necessary to protect worker health and safety. Work zones are established to prevent the spread of hazardous substances from contaminated to clean areas. Radiological work zones should be considered compatible with hazardous waste work zones, differing only in terminology. Diagrams, sketches, and maps should be used as often as necessary and constantly updated and communicated so that workers can be sure that they are appropriately protected [3]. 

In the United Kingdom, the Health and Safety at Work Act (1974) and regulations made under it require occupiers to provide a safe plant and system of work and adequate instruction, training, and supervision. In the European community, occupiers of major hazard sites are required to produce a safety case, which describes how hazards have been assessed and are kept under control. Many other countries have similar legislation, though standards of enforcement vary. 

Managers responsible for services within works, offices or premises have an additional task in that when engaging service contractors they then have joint responsibility under the Health and Safety at Work, etc. Act 1974 for the health and safety of the contractor s employees while on their premises. When engaging contractors to carry out work within the premises, systems must be implemented by which the contractor s employee works in a safe manner and does not create a hazard to the premises occupants or staff while carrying out this work. This responsibility is greater when there is an employee or service contractor working alone, as in most instances the premises communications do not allow for such circumstances (e.g. the lone employee may be working in remote areas such as plant rooms). 

QA/QC plan Health and safety plan Management plan Sampling plan Community relations plan Data management plan... 

Deliverables required for all RI/FSs in which field investigations are planned consist of a work plan, an SAP, a health and safety plan (HSP), and a community relations plan (CRP). 

Council Directive 98/24/EC of 7 April, 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) , Official Journal of the European Communities, 41(L131), 11-23 (1998). 

T. Froke, Department of Environmental Health and Safety, South Dakota State University, personal communication, 2001. 

This information sheet from the Health and Safety Executive summaries the health hazards that can arise from exposure to styrene. It provides practical advance to FRP manufacturers on how to assess and control styrene levels in the workplace and how these control measures should be monitored and maintained in accordance with the Control of Substances Hazardous to Health Regulations 2002. The document applies mainly to contact moulding processes, and aims to define what level of control is currently recognised as being reasonably practicable. EUROPEAN COMMUNITY EUROPEAN UNION UK WESTERN EUROPE... 

Most drug users—the lucky ones, at least—are no strangers to coercion. People in need of drug treatment are fortunate if they run up against the compassionate coercion of family, friends, employers, the criminal justice system, and others. Such pressure needs no excuse the health and safety of the addicted individual, as well as that of the community, require it. ° [ bold emphasis added italics original ... 

Decision making Select closure alternative Establish schedule and funding profile Establish public and community communications program Develop schedule baseline Develop cost baseline and manpower estimates Develop health and safety plan Develop special technology Prepare facility closure plan Implement quality assurance plan Install special systems (e.g., CMS) Partial release of areas to EPA closure criteria learned ... 

ACGIH is a member-based organization and community of professionals that advances worker health and safety through education and the development and dissemination of scientific and technical knowledge. ... 

---