Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

And AIM

Bertini I, Luchinat C and Aime S 1996 NMR of Paramagnetic Substances (Amsterdam Elsevier)... [Pg.1516]

The reaction between urea and Aiming sulfuric acid is rapid and exothermic. It may proceed with violent boiling unless the reaction temperature is controlled. The reactants are strongly acidic. Therefore, operators should wear suitable protective gear to guard against chemical hazard. Special stainless steel, mbber lining, fiber-reinforced plastics, and polyvinyl chloride and carbon equipment are used. [Pg.63]

All these standards have since been adopted by the member countries as their national standards, fully or in slightly modified forms, to suit their own requirements and working conditions. These standards define and clarify the quality norms and aim at in-house quality disciplines, to automatically and continually produce a product, provide a service or programme to the stipulated specifications, quality norms and customer needs. They guarantee a product or service with a minimum quality. The envisaged quality systems thus aim at a work culture that pervades all those involved in different key activities or processes, to achieve the desired goal through carefully evolved systems. [Pg.248]

A management approach of an organization centered on quality, based on the participation of all its members, and aiming at longterm success through customer satisfaction and benefits to all members of the organization and to society (ISO 8402). [Pg.565]

Fig. 14.2 Relationship between the logarithm of the resistance of D and / Aims of a penta-erythritol alkyd paint, containing 6-1% iron oxide by volume, and the concentration of the potassium chloride solutions in which they were immersed (courtesy Bril. Polym. J., 3, 41... Fig. 14.2 Relationship between the logarithm of the resistance of D and / Aims of a penta-erythritol alkyd paint, containing 6-1% iron oxide by volume, and the concentration of the potassium chloride solutions in which they were immersed (courtesy Bril. Polym. J., 3, 41...
Paper four first appeared in the Journal of Chemical Education and aimed to highlight one of the important ways in which the periodic table is not fully explained by quantum mechanics. The orbital model and the four quantum number description of electrons, as described earlier, is generally taken as the explanation of the periodic table but there is an important and often neglected limitation in this explanation. This is the fact that the possible combinations of four quantum numbers, which are strictly deduced from the theory, explain the closing of electron shells but not the closing of the periods. That is to say the deductive explanation only shows why successive electron shells can contain 2, 8, 18 and 32 electrons respectively. [Pg.5]

Lanteri, H., Roche, M., and Aime, C., 2002, Penalized maximum likelihood image restoration with positivity constraints multiplicative algorithms. Inverse Problems 18, 1397... [Pg.421]

Advantages and aims of cross-cultural mentoring schemes... [Pg.87]

This paper discusses packaging derived fuel (PDF), and aims to provide indications of possibilities for cocombustion of PDF in several European countries. National energy profiles are reviewed in order to evaluate the amount of solid fuel used, then the sourcing and preparation of PDF is evaluated and the cost estimated. The paper then discusses the relevant available combustion technologies, including cost estimates for retrofit. Finally, the market potential for PDF is indicated. 4 refs. [Pg.89]

These so-called Pareto-based techniques do not force consolidation over multiple criteria in advance and aim to return a representation of the set of optimal compounds. They support discussion between team members who may have different views on the downstream impacts of different risk factors perhaps, for example, one team member may know that there is a reliable biomarker for one potential side-effect. This would then mean that assessing this risk need not consume much development time and cost, and the risk factor can have a reduced weighting within the target product profile being evolved by the team. [Pg.258]

D self-assembly of metal nanoparticles requires special conditions since 3D growth of any kind of material is preferred. Two principal strategies to generate 2D organizations of metal nanoparticles have been developed during the last 1-2 decades true self-assembly, guided self-assembly and aimed structures. [Pg.13]

The filtration equation (5.3-21) must be adopted if a centrifuge is used for separation. During centrifugation, the surface of the filter cake accessible for flow decreases since the cake builds up toward the axis of the centrifuge. Therefore, must be substituted by the product AcAim where is the average flow area and Aim is the logarithmic mean area through the cake. This yields ... [Pg.246]

Apart from the risk assessment models, there exist models for assessing impacts to human health and the environment in LCA. Both tools [risk assessment and life cycle impact assessment (LCIA)] have different purposes and aims that are summarized in Table 1 [7]. [Pg.99]

The key appreciation here is the difference between technique expertise and analytical competence. While retaining the necessary expertise on individual techniques, understanding of the customer questions and aims (the problem setting) is paramount. Understanding of the strengths, weaknesses and... [Pg.4]

Because removal of the plastic plug lowers the initial pressure, the range of the rocket when fired nonlectrically will be a little reduced and aiming should be a little higher. [Pg.55]

Langeland and Werstuik <2003CJC525> used ab initio and AIM (atoms-in-molecules) methods to study the structures and reactivity of various phosphate ozonides. Activation energies of the bicyclic complexes (4-ethyl-l-phospha-2,6,7-trioxabicyclo[2.2.2]octane ozonide, l-phospha-2,6,7-trioxabicyclo[2.2.2]octane ozonide, and 1-phos-pha-2,8,9-trioxadamantane ozonide) were found to be significantly higher than the monocyclic structures studied. [Pg.530]

In addition to these numerous results, two other points are discussed by the authors fatty acid speciation and oil identification. These two aspects are developed in another publication written by the same authors [Keune et al. 2005]. The fatty acid speciation is based on the positive ion ToF-SIMS analysis and aims to prove if the fatty acids detected exist as free fatty acids, ester bound fatty acids or metal soaps. On account of the study of different standards, it is shown that when free fatty acids are present, the protonated molecular ion and its acylium ([M-OH]+) ion are detected. In cases of ester-bound fatty acid only the... [Pg.446]

Unusual arene-cadmium 7r-complexes have been recently prepared and structurally characterized. For example, the /w /zz-bcn/i porphyrin complex 194, which can be obtained by reaction of the free base with CdCl2, possesses a cadmium atom that is bound to the Mfez-phcnylcnc unit of the ligand in an apparent /-fashion (Figure 32). The resulting Cd-C distance of 2.71 A is shorter than the sum of the van der Waals radii.252 Despite this relatively short contact, DFT calculations and AIM analysis point to the weakness of the interaction. Comparable weak arene-cadmium 7r-interactions are also observed in the /wra-benziporphyrin cadmium chloride complex 195.253... [Pg.465]

The I.G. was a great factor in German commercial pohcy. A statesman once coined the words, "Without the I.G. and without coal, I can have no foreign pohcy." We were always concerned with a mutual exchange of experiences and aims.. . . Since the first World War I beheved that in international science and understanding lay the solution to the economic illnesses of Europe and Asia. [Pg.242]


See other pages where And AIM is mentioned: [Pg.108]    [Pg.194]    [Pg.631]    [Pg.233]    [Pg.8]    [Pg.20]    [Pg.51]    [Pg.256]    [Pg.111]    [Pg.79]    [Pg.664]    [Pg.172]    [Pg.32]    [Pg.312]    [Pg.239]    [Pg.293]    [Pg.560]    [Pg.1296]    [Pg.154]    [Pg.72]    [Pg.388]    [Pg.37]    [Pg.47]    [Pg.55]    [Pg.234]    [Pg.204]    [Pg.417]    [Pg.235]    [Pg.460]    [Pg.536]    [Pg.212]    [Pg.212]   
See also in sourсe #XX -- [ Pg.7 , Pg.18 , Pg.19 , Pg.44 , Pg.45 , Pg.47 , Pg.104 , Pg.136 , Pg.137 , Pg.143 , Pg.144 , Pg.145 , Pg.179 , Pg.181 , Pg.184 ]

See also in sourсe #XX -- [ Pg.7 , Pg.18 , Pg.19 , Pg.44 , Pg.45 , Pg.47 , Pg.104 , Pg.136 , Pg.137 , Pg.143 , Pg.144 , Pg.145 , Pg.179 , Pg.181 , Pg.184 ]




SEARCH



AIM

AIMS Testing Results and Discussion

Aim and Relevance

Aim and Results of CMT Measurements

Aim of the Project and Coordination

Aims and Objectives

Aims and Organization

Aims and Principles of Organic Poultry Production

Aims and Scope

Aims and aspirations of nuclear astrophysics

Aims and principles

Biodegradable Polymer-based Nanocomposites Nanostructure Control and Nanocomposite Foaming with the Aim of Producing Nano-cellular Plastics

Broad Motivation and Aim - Graph Theory

Concepts and Aims of Biofunctional Material Surfaces

Definitions and Aims

Future Aims and Present Problems

Outlook and Future Aims

Performance Studies—Aims and Principles

Research Aims and Outline

Target Ligands and Aims of this Chapter

Tasks and Aims

The Rationale and Aims of Pharmacogenetics

The aim and structure of this book

© 2024 chempedia.info