Maleic anhydride amines

METHYL ETHYL SULPHIDE N-PROPYL AMINE ISOPROPYL AMINE TRIMETHYL AMINE MALEIC ANHYDRIDE VINYL ACETYLENE... 

Makrolon 2659 Makrolon 2805 Makrolon 2807 Makrolon 2808 Makrolon 2809 Makrolon 2858 Makrolon 3100 Makrolon 3103 Makrolon 3105 Makrolon 3107 Makrolon 3108 Makrolon 3109 Makrolon 3118 Makrolon 3119 Makrolon 3158 Makrolon 3200, Makrolon 3203 Makrolon 3205 Makrolon 3207 Makrolon 3208 Makrolon 3258 Makrolon 6030, 6603 Makrolon 6255 Makrolon 6355 Makrolon 6357 Makrolon 6385 Makrolon 6455 Makrolon 6457 Makrolon 6485 Makrolon 6550, 6560 Makrolon 6553 Makrolon 6555 Makrolon 6557 Makrolon 6650 Makrolon 6653 Makrolon 6655 Makrolon 6680 Makrolon 6870 Makrolon AL-2247 1068 Tint Makrolon AL-2447 1068 Tint Makrolon AL-2647 1068 Tint Makrolon DP1-1243 Makrolon DPI-1416 Makrolon DPI-1452 Makrolon DPI-1805 Makrolon FCR-2405 Makrolon FCR-2407, FCR-2458 Makrolon FCR-6255 Makrolon FCR-6257 Makrolon HMS-3117 Makrolon HMS-3118 Makrolon LQ-2847 Makrolon LQ-3147 Makrolon LQ-3187 Makrolon LTG-2623 Makrolon LTG-26271112 Tint, Makrolon LTG-3123 1112 Tint, Makrolon LTG-31271112 Tint, Makrolon MAS-140 Makrolon Rx-25301118 Tint, Makrolon T-7435 Makrolon T-7855 Makrolon T-7955. See Polycarbonate MALA. See Allyl amine Maleic anhydride Malachite green Malachite green chloride. See Basic green 4... 

Shaw and coworkers developed a novel one-pot, four-component reaction between amines, maleic anhydrides, aldehydes, and thiols, which could form tetra- and penta-substituted y-lactams 91 with high diastereoselectivities (Scheme 2.24) [39],... 

Like butadiene, allene undergoes dimerization and addition of nucleophiles to give 1-substituted 3-methyl-2-methylene-3-butenyl compounds. Dimerization-hydration of allene is catalyzed by Pd(0) in the presence of CO2 to give 3-methyl-2-methylene-3-buten-l-ol (1). An addition reaction with. MleOH proceeds without CO2 to give 2-methyl-4-methoxy-3-inethylene-1-butene (2)[1]. Similarly, piperidine reacts with allene to give the dimeric amine 3, and the reaction of malonate affords 4 in good yields. Pd(0) coordinated by maleic anhydride (MA) IS used as a catalyst[2]. 

Maleic anhydride Alkali metals, amines, KOH, NaOH, pyridine... 

Ethyl and butyl esters of poly(vinyl methyl ether)/maleic anhydride (PVM/MA) copolymer were introduced in the early 1960s for use in hair sprays. These polymers also have free carboxy acid groups that can be neutralized. Recommended neutralization is 10%, but products can be found in the range of 5—30%, and recommended neutralizers include ammonium hydroxide, aminomethyl propanol, and triisopropano1 amine. These were the most widely used polymers in hair sprays before their use decreased dramatically in the early 1990s. 

Amidation. Reaction of maleic anhydride or its isomeric acids with ammonia [7664-41-7] (qv), primary amines (qv), and secondary amines produces mono- or diamides. The monoamide derivative from the reaction of ammonia and maleic anhydride is called maleamic acid [557-24-4] (8). Another monoamide derivative formed from the reaction of aniline [62-53-3] and maleic anhydride is maleanilic acid [555-59-9] (9). 

The reactions of primary amines and maleic anhydride yield amic acids that can be dehydrated to imides, polyimides (qv), or isoimides depending on the reaction conditions (35—37). However, these products require multistep processes. Pathways with favorable economics are difficult to achieve. Amines and pyridines decompose maleic anhydride, often ia a violent reaction. Carbon dioxide [124-38-9] is a typical end product for this exothermic reaction (38). 

The free maleic acid content in maleic anhydride is determined by direct potentiometric titration (166). The procedure involves the use of a tertiary amine, A/-ethylpipetidine [766-09-6J, as a titrant. A tertiary amine is chosen as a titrant since it is nonreactive with anhydrides (166,167). The titration is conducted in an anhydrous solvent system. Only one of the carboxyhc acid groups is titrated by this procedure. The second hydrogen s dissociation constant is too weak to titrate (166). This test method is not only used to determine the latent acid content in refined maleic acid, but also as a measure of the sample exposure to moisture during shipping. 

Maleic Anhydride. The ACGIH threshold limit value in air for maleic anhydride is 0.25 ppm and the OSHA permissible exposure level (PEL) is also 0.25 ppm (181). Maleic anhydride is a corrosive irritant to eyes, skin, and mucous membranes. Pulmonary edema (collection of fluid in the lungs) can result from airborne exposure. Skin contact should be avoided by the use of mbber gloves. Dust respirators should be used when maleic anhydride dust is present. Maleic anhydride is combustible when exposed to heat or flame and can react vigorously on contact with oxidizers. The material reacts exothermically with water or steam. Violent decompositions of maleic anhydride can be catalyzed at high temperature by strong bases (sodium hydroxide, potassium hydroxide, calcium hydroxide, alkaU metals, and amines). Precaution should be taken during the manufacture and use of maleic anhydride to minimize the presence of basic materials. 

Lubrication oil additives represent another important market segment for maleic anhydride derivatives. The molecular stmctures of importance are adducts of polyalkenyl succinic anhydrides (see Lubrication and lubricants). These materials act as dispersants and corrosion inhibitors (see Dispersants Corrosion and corrosion control). One particularly important polyalkenyl succinic anhydride molecule in this market is polyisobutylene succinic anhydride (PIBSA) where the polyisobutylene group has a molecular weight of 900 to 1500. Other polyalkenes are also used. Polyalkenyl succinic anhydride is further derivatized with various amines to produce both dispersants and corrosion inhibitors. Another type of dispersant is a polyester produced from a polyalkenyl succinic anhydride and pentaerythritol [115-77-5]. 

Poly(phenylene oxide)s undergo many substitution reactions (25). Reactions involving the aromatic rings and the methyl groups of DMPPO include bromination (26), displacement of the resultant bromine with phosphoms or amines (27), lithiation (28), and maleic anhydride grafting (29). Additional reactions at the open 3-position on the ring include nitration, alkylation (30), and amidation with isocyanates (31). 

Most elastomers that are used for nylon modification contain a small amount of maleic anhydride (0.3 to 2%). In the melt blending process, these elastomers react with the primary amine end groups in nylon, giving rise to nylon grafted elastomers. These grafts reduce the interfacial tension between the phases and provide steric stabili2ation for the dispersed mbber phase. Typically, thermally stable, saturated mbbers such as EPR, EPDM, and styrene—ethylene/butylene—styrene (SEBS) are used. 

Maleic anhydride, maleic acid, and fumaric acid), foUowed by amine neutraH2ation. Baking primers made with such resins provide the same corrosion... 

Amines and other bases cataly2e the exothermic decomposition of molten maleic anhydride [108-31-6] at temperatures above 150°C, accompanied by the rapid evolution of gaseous products (44,45). The rate of reaction reportedly increases with the basicity of the amine and higher initial temperatures. The reaction mixture can become explosive. 

By virtue of their unique combination of reactivity and basicity, the polyamines react with, or cataly2e the reaction of, many chemicals, sometimes rapidly and usually exothermically. Some reactions may produce derivatives that ate explosives (eg, ethylenedinitrarnine). The amines can cataly2e a mnaway reaction with other compounds (eg, maleic anhydride, ethylene oxide, acrolein, and acrylates), sometimes resulting in an explosion. 

The epoxidised polybutadiene resins available to date are more viscous than the diglycidyl ethers except where volatile diluents are employed. They are less reactive with amines but have a similar reactivity with acid anhydride hardeners. Cured resins have heat distortion temperatures substantially higher than the conventional amine-cured diglycidyl ether resins. A casting made from an epoxidised polybutadiene hardened with maleic anhydride and cured for two hours at 50°C plus three hours at 155°C plus 24 hours at 200°C gave a heat... 

The original compound, maleimide (2,5-dioxo-A -pyrroline), is synthesized by the cyclo-condensation of ammonia and maleic acid. Similarly, primary amine is added to maleic anhydride, followed by cyclocondensation, to form N-substituted maleimide (Fig. 2). This reaction is applied to the preparation of bis-maleimides (BMl) [1]. At first, BMI was used as a crosslinking agent for natural rubber (NR). An o-dichlorobenzene solution of NR was crosslinked by BMI at I08-150°C in the presence of peroxides. The radicals generated from peroxides react with the double bonds of both BMI and NR [ 1 ]. 

Blends based on polyolefins have been compatibilized by reactive extrusion where functionalized polyolefins are used to form copolymers that bridge the phases. Maleic anhydride modified polyolefins and acrylic acid modified polyolefins are the commonly used modified polymers used as the compatibilizer in polyolefin-polyamide systems. The chemical reaction involved in the formation of block copolymers by the reaction of the amine end group on nylon and anhydride groups or carboxylic groups on modified polyolefins is shown in Scheme 1. 

Coran and Patel [74] investigated the reactive com-patibilization of PP-NBR and HDPE-NBR blends using phenolic modified polyolefin, maleic anhydride modified polyolefin, and amine terminated nitrile rubber as reactive components. Dynamic vulcanization was also inves-... 

Potassium ferricyanide in oxidative decarboxylation, 40, 86 Potassium permanganate for oxidation of (trialkylmethyl)amines to tri-alkylnitromethanes, 43,87 Pregnenolone acetate, conversion to 3/3-acetoxyetienic acid, 42, 5 Propane, 2,2-dibotoxy-, 42,1 Propargylsuccinic anhydride, by-product in addition of maleic anhydride to allcne, 43, 27... 

The preferred catalysts are salts of inorganic and organic acids as well as tertiary amines. Phthalic anhydride, succinic anhydride and maleic anhydride are typical acid anhydrides, while ethylene oxide, propylene oxide, epichlorohydrin and phenyl glycidyl ether are typical epoxides. The synthesis of a ladder polymer was carried out by using bisanhydrides264. ... 

Calculated Degree of Maleic Anhydride Grafting Required to Obtain a Solubility Parameter of 18.0 (J/cm ) , Assuming Full Conversion of the Grafted Anhydride with the Amines Listed, and Corresponding Glass Transition Temperatures (Tg)... 

Oil swell for EPM grafted with maleic anhydride (EPM-g-MA) (13 wt% grafted MA) capped with stoichiometric amount of amine. 

With aliphatic amines, the decomposition catalysis is moderate with heterocyclic aromatic amines (pyridine, quinoline), 0.1 % of amine is sufficient to cause maleic anhydride to decompose. An accident has also been mentioned with NaOH. This decomposition also takes place in the presence of sodium, lithium, ammonium, potassium, calcium, barium, magnesium and beryllium cations. 

A corrosion inhibitor with excellent film-forming and film-persistency characteristics is produced by first reacting Cig unsaturated fatty acids with maleic anhydride or fumaiic acid to produce the fatty acid Diels-Alder adduct or the fatty acid-ene reaction product [31]. This reaction product is further reacted in a condensation or hydrolyzation reaction with a polyalcohol to form an acid-anhydride ester corrosion inhibitor. The ester may be reacted with amines, metal hydroxides, metal oxides, ammonia, and combinations thereof to neutralize the ester. Surfactants may be added to tailor the inhibitor formulation to meet the specific needs of the user, that is, the corrosion inhibitor may be formulated to produce an oil-soluble, highly water-dispersible corrosion inhibitor or an oil-dispersible, water-soluble corrosion inhibitor. Suitable carrier solvents may be used as needed to disperse the corrosion inhibitor formulation. 

Similarly, a salt of an ethoxylated amine and a reaction product of an alcohol and a fatty acid maleic anhydride adduct produced by a reaction between maleic anhydride and an unsaturated fatty acid has been described [511]. 

In copolymers containing the styrene sulfonate moiety and maleic anhydride units, the maleic anhydride units can be functionalized with alkyl amine [1411-1416]. The water-soluble polymers impart enhanced deflocculation characteristics to the mud. Typically, the deflocculants are relatively low-molecular-weight polymers composed of styrene sodium sulfonate monomer maleic anhydride, as the anhydride and/or the diacid and a zwitterionic functionalized maleic anhydride. Typically the molar ratio of styrene sulfonate units to total maleic anhydride units ranges from 3 1 to 1 1. The level of alkyl amine functionalization of the maleic anhydride units is 75 to 100 mole-percent. The molar concentrations of sulfonate and zwitterionic units are not necessarily equivalent, because the deflocculation properties of these water-soluble polymers can be controlled via changes in their ratio. 

---