Rubber-modified styrene-acrylonitrile

Acrylonitrile-styrene-acrylate (ASA) constitutes a versatile member of the group of styrenic copolymers used for housings, covers and other applications which require excellent surface appearance and environmental stability combined with high impact resistance and stiffness. It consists of a poly(styrene-acrylonitrile) matrix modified with small rubber particles. [Pg.341]

This chapter discusses the dynamic mechanical properties of polystyrene, styrene copolymers, rubber-modified polystyrene and rubber-modified styrene copolymers. In polystyrene, the experimental relaxation spectrum and its probable molecular origins are reviewed further the effects on the relaxations caused by polymer structure (e.g. tacticity, molecular weight, substituents and crosslinking) and additives (e.g. plasticizers, antioxidants, UV stabilizers, flame retardants and colorants) are assessed. The main relaxation behaviour of styrene copolymers is presented and some of the effects of random copolymerization on secondary mechanical relaxation processes are illustrated on styrene-co-acrylonitrile and styrene-co-methacrylic acid. Finally, in rubber-modified polystyrene and styrene copolymers, it is shown how dynamic mechanical spectroscopy can help in the characterization of rubber phase morphology through the analysis of its main relaxation loss peak. [Pg.666]

Acrylate styrene acrylonitrile Acrylate modified styrene acrylonitrile Acrylic acid ester rubber Acrylonitrile butadiene rubber or nitrile butadiene rubber Acrylonitrile butadiene styrene Acrylonitrile styrene/chlorinated polyethylene Acrylonitrile methyl methacrylate Acrylonitrile styrene/EPR rubber or, acrylonitrile ethylene propylene styrene Alpha methyl styrene Atactic polypropylene Butadiene rubber or, cis-1,4-polybutadiene rubber or, polybutadiene rubber Butadiene styrene block copolymer Butyl rubber Bulk molding compound Casein formaldehyde Cellulose acetate Cellulose acetate butyrate Cellulose acetate propionate Cellulose nitrate Chlorinated polyethylene Chlorinated polyvinyl chloride Chloro-polyethylene or, chlorinated polyethylene. [Pg.135]

Rubber-Modified Copolymers. Acrylonitrile—butadiene—styrene polymers have become important commercial products since the mid-1950s. The development and properties of ABS polymers have been discussed in detail (76) (see Acrylonitrile polymers). ABS polymers, like HIPS, are two-phase systems in which the elastomer component is dispersed in the rigid SAN copolymer matrix. The electron photomicrographs in Figure 6 show the difference in morphology of mass vs emulsion ABS polymers. The differences in stmcture of the dispersed phases are primarily a result of differences in production processes, types of mbber used, and variation in mbber concentrations. [Pg.508]

When the physical modification method is used, PS is modified by mechanical stirring with various synthetic rubbers such as polybutadiene, polybutadiene styrene, polyisopropene, polychloropropene, polybutadiene styrene-acrylonitrile copolymers. In the chemical modification, PS is modified with polyfunctional modificators in the presence of cationic catalysis. [Pg.259]

In the late 1940s, the demand for styrene homopolymers (PS) and styrene-acrylonitrile copolymers (SAN) was drastically reduced due to their inherent brittleness. Thus, the interest was shifted to multiphase high-impact polystyrene (HIPS) and rubber-modified SAN (ABS). In principle, both HIPS and ABS can be manufactured by either bulk or emulsion techniques. However, in actual practice, HIPS is made only by the bulk process, whereas ABS is produced by both methods [132,133]. [Pg.656]

Styrene acrylonitrile (SAN), acrylate rubber modified styrene acrylonitrile (ASA), acrylonitrile EPDM styrene (AES or AEPDS), acrylonitrile chlorinated polyethylene styrene (ACS)... [Pg.365]

ASA is an acrylate rubber-modified styrene acrylonitrile copolymer... [Pg.365]

Butadiene is used primarily in the production of synthetic rubbers, including styrene-butadiene rubber (SBR), polybutadiene nibber (BR), styrene-butadiene latex (SBL), chloroprene rubber (CR) and nitrile rubber (NR). Important plastics containing butadiene as a monomeric component are shock-resistant polystyrene, a two-phase system consisting of polystyrene and polybutadiene ABS polymers consisting of acrylonitrile, butadiene and styrene and a copolymer of methyl methacrylate, butadiene and styrene (MBS), which is used as a modifier for poly(vinyl chloride). It is also used as an intermediate in the production of chloroprene, adiponitrile and other basic petrochemicals. The worldwide use pattern for butadiene in 1981 was as follows (%) SBR + SBL, 56 BR, 22 CR, 6 NR, 4 ABS, 4 hexamethylenediamine, 4 other, 4. The use pattern for butadiene in the United States in 1995 was (%) SBR, 31 BR, 24 SBL, 13 CR, 4 ABS, 5 NR, 2 adiponitrile, 12 and other, 9 (Anon., 1996b). [Pg.114]

The MABS copolymers are prepared by dissolving or dispersing polybuiadiene rubber in a methyl methacrylate—acrylonitrile—styrene monomer mixture. MBS polymers are prepared by grafting methyl methacrylate and styrene onto a styrene—butadiene rubber in an emulsion process. The product is a two-phase polymer useful as an impact modifier for rigid polytvinyl chloride). [Pg.990]

STYRENE. Styrene, CgH5CH=CH2, is the simplest and by far the most important member of a series of aromatic monomers. Also known commercially as styrene monomer (SM). styrene is produced in large quantities for polymerization. It is a versatile monomer extensively used for the manufacture of plastics, including crystalline polystyrene, rubber-modified impact polystyrene, expandable polystyrene, acrylonitrile-butadiene-styrene copolymer (ABS), styrene-acrylonitrile resins (SAN), styrene-butadiene latex, styrene-butadiene rubber (SBR). and unsaturated polyester resins. See also Acrylonitrile Polymers. [Pg.1554]

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... [Pg.958]

MC MDI MEKP MF MMA MPEG MPF NBR NDI NR OPET OPP OSA PA PAEK PAI PAN PB PBAN PBI PBN PBS PBT PC PCD PCT PCTFE PE PEC PEG PEI PEK PEN PES PET PF PFA PI PIBI PMDI PMMA PMP PO PP PPA PPC PPO PPS PPSU Methyl cellulose Methylene diphenylene diisocyanate Methyl ethyl ketone peroxide Melamine formaldehyde Methyl methacrylate Polyethylene glycol monomethyl ether Melamine-phenol-formaldehyde Nitrile butyl rubber Naphthalene diisocyanate Natural rubber Oriented polyethylene terephthalate Oriented polypropylene Olefin-modified styrene-acrylonitrile Polyamide Poly(aryl ether-ketone) Poly(amide-imide) Polyacrylonitrile Polybutylene Poly(butadiene-acrylonitrile) Polybenzimidazole Polybutylene naphthalate Poly(butadiene-styrene) Poly(butylene terephthalate) Polycarbonate Polycarbodiimide Poly(cyclohexylene-dimethylene terephthalate) Polychlorotrifluoroethylene Polyethylene Chlorinated polyethylene Poly(ethylene glycol) Poly(ether-imide) Poly(ether-ketone) Polyethylene naphthalate Polyether sulfone Polyethylene terephthalate Phenol-formaldehyde copolymer Perfluoroalkoxy resin Polyimide Poly(isobutylene), Butyl rubber Polymeric methylene diphenylene diisocyanate Poly(methyl methacrylate) Poly(methylpentene) Polyolefins Polypropylene Polyphthalamide Chlorinated polypropylene Poly(phenylene oxide) Poly(phenylene sulfide) Poly(phenylene sulfone)... [Pg.959]

From its architecture, ASA is closely related to ABS however, instead of polybutadiene rubber particles grafted with poly(styrene-acrylonitrile) (PSAN), poly(alkyl acrylate)-based graft rubber particles are used as the impact modifier (Figure 16.1). [Pg.341]

There are a number of flame-retardant styrenic polymers that will be covered in this chapter. These include polystyrene itself, rubber-modified polystyrene [high-impact polystyrene (HIPS)] and rubber-modified styrene-acrylonitrile copolymer [acrylonitrile-butadiene-styrene (ABS)]. Blends with styrenic... [Pg.685]

Craze formation is a dominant mechanism in the toughening of glassy polymers by elastomers in polyblends. Examples are high-impact polystyrene (HIPS), impact poly(vinyl chloride), and ABS (acrylonitrile-butadiene-styrene) polymers. Polystyrene and styrene-acrylonitrile (SAN) copolymers fracture at strains of 10 , whereas rubber-modified grades of these polymers (e.g., HIPS and ABS) form many crazes before breaking at strains around 0.5. Rubbery particles in... [Pg.425]

A group of new, fully miscible, polymer blends consisting of various styrene-maleic anhydride terpolymers blended with styrene-acrylonitrile copolymer and rubber-modified versions of these materials have been prepared and investigated. In particular the effects of chemical composition of the components on heat resistance and the miscibility behavior of the blends have been elucidated. Toughness and response to elevated temperature air aging are also examined. Appropriate combinations of the components may be melt blended to provide an enhanced balance of heat resistance, chemical resistance, and toughness. [Pg.49]

Blending of the high heat resistant terpolymer with ABS to form a miscible matrix phase, as defined in Figure 4, is of course, expected to increase the heat resistance of the ABS. The data in Table II, taken from references (2-4), provide a systematic representation of the variation of DTUL with terpolymer/ABS blend composition for the AN, IB, and MM-containing terpolymers (both glassy and rubber-modified). In some of these cases, as noted, a copolymer of a-methyl styrene/acrylonitrile was added to the formulation. From these data it is apparent that DTUL does, indeed, increase with increasing terpolymer concentration in the blends. Moreover, the effect of the terpolymer composition on DTUL of the blends is... [Pg.54]