Acrylonitrile ethylene

Other blends of polycarbonate have limited markets so far. The most significant blends are with polyurethanes, polyetherimides, acrylate—styrene-acrylonitrile (ASA), acrylonitrile—ethylene—styrene (AES), and styrene—maleic anhydride (SMA). [Pg.290]

ISO 6402-1 2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 Designation system and basis for... [Pg.307]

AES (or AEPDS) is an acrylonitrile-(ethylene-propylene-diene)-styrene... [Pg.365]

Benzene is a clear, colorless, flammable liquid with a pleasant characteristic odor, bp 80.1°C, flash point -11.1°C, and ignition temperature 538°C. Benzene has been found to be very toxic and is on the list of Known to Be Human Carcinogens published every two years by the Department of Health and Human Services under the National Toxicology Program (NTP). There are four top 50 chemicals on this worst carcinogen list benzene 1,3-butadiene ethylene oxide and vinyl chloride. There are also four chemicals in the top 50 on the Reasonably Anticipated to Be Human Carcinogens list acrylonitrile, ethylene dichloride, formaldehyde, and propylene oxide. [Pg.133]

Poly(methyl methacrylate) Vinyl chloride Acrylonitrile Ethylene Acrylic add Methylacrylate Acrylonitrile Styrene Butylene dimethacrylate Acrylic add... [Pg.23]

On the other hand, high impact poly(styrene) (HIPS), ABS, acrylonitrile-ethylene-propylene-based rubber/styrene copolymer resin (AES), acrylonitrile/acryl-based rubber/styrene copolymer resin (AAS) show excellent impact strengths, but these resins are inferior in chemical resistance and abrasion resistance. [Pg.222]

Besides MMBS, also related copolymers, such as methyl meth-acrylate/acrylonitrile/butadiene/styrene and acrylonitrile/ethylene/ propylene/diene/styrene are impact modifiers for PC compositions (16). [Pg.321]

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... [Pg.958]

Acrylonitrile-Ethylene/Propylene-Styrene Copolymer AES is a terpolymer obtained by grafting styrene-acrylonitrile copolymer to ethylene-propylene or ethylene-propylene-diene monomer rubber. Similar to ABS except with improved weathering resistance. [Pg.70]

JSR Corp. AES resins Styrene/acrylonitrile/ethylene-propylene rubber Solution polymerization for AES resins 13 1995... [Pg.130]

Karan et al. [10] reported glucose sensors using quinone modified poly-siloxane (Fig. 3.8a-A) and acrylonitrile-ethylene (Fig. 3.8a-B) co-polymers and glucose oxidase. Sensors constructed with glucose oxidase and quinone modified polysiloxane were considerably more efficient than those using acrylonitrile-ethylene system to transfer electrons from reduced glucose oxidase to a conventional carbon paste electrode. Their results coincide with those described previously for the ferrocene-modified polysiloxane system. The excellent flexibility of poly(siloxane) allows it to function as an efficient... [Pg.356]

Fig. 3.8. (a) A Structure of the hydroquinone-containing poly(siloxane). B Structure of the hydroquinone-containing poly(acrylonitrile-ethylene). The m n ratio is approximately 1 2 for both systems. Reprinted with permission from [10]. (b) Structure of the polyCether amine quinone) polymers. Reprinted with permission from [15], 1994 American Chemicad Society. [Pg.357]

While free-radical chain reactions were known shortly after the turn of the 20th century, it was not until the mid-1930s that free-radical polymerization was recognized. Today, free-radical polymerization finds application in the synthesis of many important classes of polymers including those based upon methacrylates, styrene, chloroprene, acrylonitrile, ethylene, and the many copolymers of these vinyl monomers. Many good reviews and books on this subject are available.12... [Pg.515]

Impact modifier Reduce brittleness Adds bulk to compound S tyrene- acrylonitrile, ethylene-vinyl acetate copolymer... [Pg.194]

AES Thermoplastic quaterpolymer from acrylonitrile, ethylene, propylene, and styrene... [Pg.811]

AES acrylonitrile-ethylene-propylene- AMBA American Mold Builders Association... [Pg.586]

AEPDM acrylonitrile/ ethylene-propylene- AMPP acrylic modified polypropylene... [Pg.586]

AES acrylonitrile-ethylene-styrene AMS alpha methyl styrene... [Pg.586]

All thermoplastic pol)aners and elastomers, with the exception of silicones, are carbon-based. They are made up from the linking of one or more monomers into long molecular chains. Many of the same monomers are foimd in both thermoplastic and elastomeric polymers. Typical examples include styrene, acrylonitrile, ethylene, propylene, and acrylic acid and its esters. An elastomer is in a thermoplastic state prior to vulcanization. [Pg.446]