Occlude

On standing, gelatinous aluminium hydroxide, which may initially have even more water occluded than indicated above, is converted into a form insoluble in both acids and alkalis, which is probably a hydrated form of the oxide AI2O3. Both forms, however, have strong adsorptive power and will adsorb dyes, a property long used by the textile trade to dye rayon. The cloth is first impregnated with an aluminium salt (for example sulphate or acetate) when addition of a little alkali, such as sodium carbonate, causes aluminium hydroxide to deposit in the pores of the material. The presence of this aluminium hydroxide in the cloth helps the dye to bite by ad sorbing it—hence the name mordant (Latin mordere = to bite) dye process. 

Decolorisation by Animal Charcoal. It sometimes hap pens (particularly with aromatic and heterocyclic compounds) that a crude product may contain a coloured impurity, which on recrystallisation dissolves in the boiling solvent, but is then partly occluded by crystals as they form and grow in the cooling solution. Sometimes a very tenacious occlusion may thus occur, and repeated and very wasteful recrystallisation may be necessary to eliminate the impurity. Moreover, the amount of the impurity present may be so small that the melting-point and analytical values of the compound are not sensibly affected, yet the appearance of the sample is ruined. Such impurities can usually be readily removed by boiling the substance in solution with a small quantity of finely powdered animal charcoal for a short time, and then filtering the solution while hot. The animal charcoal adsorbs the coloured impurity, and the filtrate is usually almost free from extraneous colour and deposits therefore pure crystals. This decolorisation by animal charcoal occurs most readily in aqueous solution, but can be performed in almost any organic solvent. Care should be taken not to use an excessive quantity... 

When these benzoyl compounds separate in the course of the Schotten-Baumann reaction, they frequently occlude traces of unchanged benzoyl chloride, which thus escapes hydrolysis by the alkali it is advantageous there fore to recrystallise the benzoyl compounds whenever possible from ethanol or methylated spirit, since these solvents will esterify the unchanged chloride and so remove the latter from the recrystallised material. 

The use of lead nitrate in place of silver nitrate is to be avoided, for the precipitated lead sulphide occludes most of the free acid. 

Blank on tube. It Is advisable with a newly packed tube to carry out a determination on A.R. glucose (ca. 25 mg.) this serves to burn out the tube by removing occluded air from the permanent filling and also as an additional check on the quality of the carbon dioxide supply. 

Iron is a relatively abundant element in the universe. It is found in the sun and many types of stars in considerable quantity. Its nuclei are very stable. Iron is a principal component of a meteorite class known as siderites and is a minor constituent of the other two meteorite classes. The core of the earth — 2150 miles in radius — is thought to be largely composed of iron with about 10 percent occluded hydrogen. The metal is the fourth most abundant element, by weight that makes up the crust of the earth. 

Occlusions, which are a second type of coprecipitated impurity, occur when physically adsorbed interfering ions become trapped within the growing precipitate. Occlusions form in two ways. The most common mechanism occurs when physically adsorbed ions are surrounded by additional precipitate before they can be desorbed or displaced (see Figure 8.4a). In this case the precipitate s mass is always greater than expected. Occlusions also form when rapid precipitation traps a pocket of solution within the growing precipitate (Figure 8.4b). Since the trapped solution contains dissolved solids, the precipitate s mass normally increases. The mass of the precipitate may be less than expected, however, if the occluded material consists primarily of the analyte in a lower-molecular-weight form from that of the precipitate. 

Occlusions are minimized by maintaining the precipitate in equilibrium with its supernatant solution for an extended time. This process is called digestion and may be carried out at room temperature or at an elevated temperature. During digestion, the dynamic nature of the solubility-precipitation equilibrium, in which the precipitate dissolves and re-forms, ensures that occluded material is eventually exposed to the supernatant solution. Since the rate of dissolution and reprecipitation are slow, the chance of forming new occlusions is minimal. 

Occluded Mn04 in experiment 1 imparts color to KCIO4... 

Urea has the remarkable property of forming crystalline complexes or adducts with straight-chain organic compounds. These crystalline complexes consist of a hoUow channel, formed by the crystallized urea molecules, in which the hydrocarbon is completely occluded. Such compounds are known as clathrates. The type of hydrocarbon occluded, on the basis of its chain length, is determined by the temperature at which the clathrate is formed. This property of urea clathrates is widely used in the petroleum-refining industry for the production of jet aviation fuels (see Aviation and other gas-TURBINE fuels) and for dewaxing of lubricant oils (see also Petroleum, refinery processes). The clathrates are broken down by simply dissolving urea in water or in alcohol. 

In addition to graft copolymer attached to the mbber particle surface, the formation of styrene—acrylonitrile copolymer occluded within the mbber particle may occur. The mechanism and extent of occluded polymer formation depends on the manufacturing process. The factors affecting occlusion formation in bulk (77) and emulsion processes (78) have been described. The use of block copolymers of styrene and butadiene in bulk systems can control particle size and give rise to unusual particle morphologies (eg, coil, rod, capsule, cellular) (77). 

The most common hydrophobic adsorbents are activated carbon and siUcahte. The latter is of particular interest since the affinity for water is very low indeed the heat of adsorption is even smaller than the latent heat of vaporization (3). It seems clear that the channel stmcture of siUcahte must inhibit the hydrogen bonding between occluded water molecules, thus enhancing the hydrophobic nature of the adsorbent. As a result, siUcahte has some potential as a selective adsorbent for the separation of alcohols and other organics from dilute aqueous solutions (4). 

Pentaeiythritol Tetranitrate. Specification-grade pentaerythritol tetranitrate (PETN) can be stored up to 18 months at 65°C without significant deterioration. However, many materials have been found to be incompatible with PETN and the presence of as Htfle as 0.01% occluded acid or alkah greatly accelerates decomposition. The decomposition of PETN is autocatalytic with reported kinetic constants oi E = 196.6 kJ/mol (47 kcal/mol) and Z = 6.31 x 10 . The decomposition products of PETN at 210°C in wt % are 47.7 NO, 21.0 CO, 11.8 NO2, 9.5 N2O, 6.3 CO2, 2.0 H2, and 1.6... 

The diluent portion also determines the form, or physical appearance, of the flavor, ie, Hquid, powder, or paste. Liquid flavor forms include water-soluble, oil-soluble, and emulsion forms powder flavor forms include plated (including dry solubles), extended, occluded, inclusion complexes, and other encapsulated forms and paste flavor forms include fat, protein, and carbohydrate-based paste. 

In an alternative procedure (84), the electrolyte is pumped through the cells at such a rate that the outlet concentration is 50 g/L MnSO and 67 g/L H2SO4. This spent electrolyte is then mixed with equal parts of make-up solution containing 150 g/L MnSO and the mixture returned to the electrolysis step. The electrolysis is continued over a period of days and terrninated when the EMD layer deposited on the anode reaches a specific thickness, usually on the order of 1—3 or 6—8 mm. Following completion of the electrolysis cycle, the entire electrode assembly is removed from the cell for removal of the deposited EMD, either manually or by an automated system (85). The product is repeatedly washed with water to extract the occluded acid (83) and dried at about 85°C in air. 

The second method of preparation involves precipitation from a cold acidic solution of mercurous nitrate. Mercurous chloride is isolated after washing in a manner similar to the chamber method described. This product, which generally contains small amounts of occluded sodium nitrate, is satisfactory as a technical-grade material. Difficulty may be encountered in having it pass NF or reagent-grade specifications (see Fine chemicals). 

Impurities in cmde metal can occur as other metals or nonmetals, either dissolved or in some occluded form. Normally, impurities are detrimental, making the metal less useful and less valuable. Sometimes, as in the case of copper, extremely small impurity concentrations, eg, arsenic, can impart a harmful effect on a given physical property, eg, electrical conductivity. On the other hand, impurities may have commercial value. For example, gold, silver, platinum, and palladium, associated with copper, each has value. In the latter situation, the purity of the metal is usually improved by some refining technique, thereby achieving some value-added and by-product credit. 

Surface Coating. A dense surface coating (encapsulation) that contains no occluded solvent decreases interparticle attraction provided that the coating has a Hamaker constant intermediate between the particle and the Hquid. This is called semisteric stabilization (ST). The energy of interaction between coated spheres is as follows (26) ... 

Viscosity. Because a clump of particles contains occluded Hquid, the effective volume fraction of a suspension of clumps is larger than the volume fraction of the individual particles that is, there is less free Hquid available to faciHtate the flow than if the clumps were deagglomerated. The viscosity of a suspension containing clumps decreases as the system becomes deagglomerated. This method is not very sensitive in the final stages of deagglomeration when there are only a few small clumps left. 

Sediment Volume. If the dispersion is unstable, the sediment bed will be quite deep and sedimenting particles will stick together where they first strike the sediment bed, thus forming an open stmcture with considerable occluded Hquid. If the dispersion is stable to reagglomeration, the particles will move freely past one another to avoid contact as long as possible. The result is a thin sediment bed with maximum soHds packing and minimum occluded hquid (12). Since dispersed particles setde more slowly than docs, centrifugation maybe needed to force sedimentation of small particles within a reasonable analysis time. 

Another cosmetic appHcation of aluminum compounds is as lakes for Hpstick manufacture (21). A water-soluble dye can become a Hpstick ingredient if combined with compounds that are colorless and insoluble. The result, caHed a lake, is insoluble in both oil and water. Some dyes are laked with alumina others are dissolved in water and treated with solutions that precipitate Al(OH)2 with the dye molecules occluded in the precipitate. These... 

Low Soda Hydroxide. Tlie Na20 content of nomial Bayer hydroxide is around 0.2—0.4%, 0.1% of wliich can be removed by thorough wasliing. Tlie remaining soda is trapped within the hydroxide crystal. Experience shows that the occluded soda content is reduced when cry staUization is carried out under low aluniina-supersaturation conditions and at relatively higher temperatures (80—95°C). Soda contents as low as 0.05% Na20 can be obtained by tliis procedure. However, these conditions also reduce hydroxide ield and thus increase the production cost. Low soda aluminum hydroxide is generally employed in the production of aluminas for the ceramics industries. 

The cmcible process gave steels that were not only homogeneous throughout but were free from occluded slag originating in the wrought kon used to make cement steel. Cmcible steel was so superior to cement steel for many purposes that the cmcible process quickly became the leader for the production of the finest steels. Its drawback was, however, that each cmcible held only ca 50 kg steel. 

Numerous references to this compound as a 2.5 hydrate (183) or ttihydrate (184) are because of the presence of occluded mother Hquor. Since the salt remains in solution much of it is removed in filtration of the final Ca(OCl)2 paste the dried product contains about 70% av CI2. 

Chlorination of thick lime slurry at 40—45°C forms large crystals of hemibasic calcium hypochlorite. The fine crystals obtained under 30°C are difficult to filter and since they invariably contain occluded mother Hquor, they have frequently been incorrectly referred to as monobasic or two-thirds basic (187,188). The isolated hemibasic crystals are suspended in a thin chlorinated lime slurry and chlorinated, producing laminar crystals of Ca(OCl)2 2H20, which are filtered and dried. Mother Hquors are treated with a lime slurry to recover the dibasic crystals, which are then suspended in a Hquor of lower CaCl2 content and chlorinated to form the neutral salt (188—190). 

---