Objectivity development

A principal advantage of the Raman microprobe is that the optics are those of a conventional light microscope a wide variety of special-purpose objectives developed for materials and biological microscopy are available. The Raman microprobe also offers the advantage of fluorescence reduction owing to the high spatial resolution of the microscope if a region of low fluorescence can be chosen for observation. 

Planning. Through planning, technology managers estabUsh objectives, develop the rationale for these objectives, and estimate the resources required over time to succeed at the strategic business, R D organizational, and project levels. 

Section 13.5 introduces a set of process patterns that are elaborated on throughout the case study. These patterns describe some of the broad contexts for development and a reasonable strategy for each one. Pattern 13.1, Object Development from Scratch, outlines an approach for developing a system from scratch. Pattern 13.2, Reengineering, addresses the case when an existing design is being reworked. Pattern 13.3, Short-Cycle Development, motivates development in short incremental cycles as a useful basis for many projects. 

Pattern 13.1, Object Development from Scratch, shows how to proceed assuming that you have no existing design. 

Perform preliminary evaluation of the technology available Refine scope of the system and confirm strategic objectives Develop a process/operating description, associated restrictions, interfaces, proposed solution, and critical operational checks/sequencing, including how Part 11 will affect and interact with the process/operation Approve the operational feasibility study Perform a preliminary Criticality and Complexity analysis... 

Task 2. Sampling and Analysis Plan Preparation Task 1. Data Quality Objectives Development... 

Planning is the most critical phase of the data collection process as it creates a foundation for the success of the implementation and assessment phases. Two major tasks of the planning phase, as shown in Figure 2.1, are Task 1—Data Quality Objectives Development and Task 2—Sampling and Analysis Plan Preparation. The SAP summarizes the project objectives and requirements for environmental chemical data collection. 

For many years the implementation of transportation policies, and all others, followed a logically structured cycle of allocative decisions based on a rational approach that is usually illustrated with four main steps specification of objectives development of alternatives by which the objectives may be accomplished evaluation of the consequences of each alternative and finally, selection of the action that maximizes the net benefit according to decision-makers criteria and valuations. 

Brief Liaison team members on current situation and incident objectives develop response strategy and tactics outline action plan and designate time for next briefing. ... 

The overall picture of an individual quantum object developed here may be summed up as follows ... 

Objective Develop text and refine the report. Only committee members and staff were in attendance. 

OBJECTIVE develop COMPOSITE MATERIALS HAVING MAXIMUM FLEXIBILITY IN VARIATION OF MECHANICAL PROPERTIES WHILE MAINTAINING BIOCOMPATIBILITY... 

Program Objective Develop a system to simultaneously detonate numerous unlinked explosive charges through the command and control of only one. 

Objectives Develop tentative recommendations discuss and develop the first full message draft. 

The purpose of project planning is to confirm the project scope and objectives develop the project organization, schedule, and budget secure the necessary resources and create clear expectations about the project organization, timing, budget, and resources. 

Every control chart should be associated with one or more specific objectives. The objective might be to improve the yield of the process, identify and remove special causes from a process, or establish statisticsd control so that the capahUity of the process can be determined. The objectives should be summarized on the control chart form. After a period of time, the objective may be met. The control chart should be discontinued at that time, or a new objective developed. 

Objective Develop biological-based AOs for these expanded... 

Objective Develop a HALS/FR additive solution that avoids this acid/base Interaction probiem. 

Objective Develop an equivalent H-FR package that provides higher transiucency... 

Objective Develop "leaner" processes for compounding and molding LF-PP. 

Goals and Objectives (4) Workforce involved in objectives development and can explain desired results/ measures. (3) Majority of personnel can explain desired results and measures for achieving them. (2) Some personnel can explain desired results and measures for achieving them. (1) Written (or oral, where appropriate) goals and objectives. (0) No safety and health goals and objectives exist. 

Understand how marketing strategy has been developed to achieve corporate objectives - develop knowledge of the product/service market, and the characteristics (range, mix, and volume) that the operation must satisfy. 

As specified at the beginning of the chapter, the number of papers focusing on the use of nanostructures in amperometric sensing is increasing rapidly. In many cases, the nanosized materials involved and the techniques proposed for the deposition onto electrode surfaces are actually variants of well-known systems and procedures. On the other hand, some of the most iimovative experimental approaches are so complex to realize, or require so much expensive instrumentation, that they are very rarely adopted. Moreover, novel systems, such as multimetallic nano-objects and some multicomponent composite materials, still need to be adequately studied with respect to fundamental properties. In addition, some nano-objects developed in different contexts, e.g., organic electronics and catalysis, might be of great interest in the frame of amperometric sensors. 

The learning objectives developed for the described introductory geotechnical engineering course have helped to improve course organization and more clearly define expectations regarding student learning. In addition, student learning continues to improve. 

Hamilton, M. (In press). System Oriented Objects Development Before the Fact. 

Development of risk management and compliance objectives Development of risk management and compliance programmes of action... 

For alarm objective development, one needs to carry out objective analysis to... 

Natural computing and evolutionary optimization can, in principle, be extended to the design of a wide variety of nonbiological objects. Developing better methods of universal (i.e., numerical) molecular computation is the goal of most scientists in the field. However, nonnumerical applications of molecular computation may, in aggregate, prove to be just as useful and can be realized more immediately. Until there are practical formats for numerical molecular computation, these nonnumerical formats will serve as examples of the power promised by molecular computation. 

In the next section you will find our corresponding project objectives, development statuses and... 

---