Melt processability

Acrylonitrile copolymeri2es readily with many electron-donor monomers other than styrene. Hundreds of acrylonitrile copolymers have been reported, and a comprehensive listing of reactivity ratios for acrylonitrile copolymeri2ations is readily available (34,102). Copolymeri2ation mitigates the undesirable properties of acrylonitrile homopolymer, such as poor thermal stabiUty and poor processabiUty. At the same time, desirable attributes such as rigidity, chemical resistance, and excellent barrier properties are iacorporated iato melt-processable resias. 

In the late 1980s, new fully aromatic polyester fibers were iatroduced for use ia composites and stmctural materials (18,19). In general, these materials are thermotropic Hquid crystal polymers that are melt-processible to give fibers with tensile properties and temperature resistance considerably higher than conventional polyester textile fibers. Vectran (Hoechst-Celanese and Kuraray) is a thermotropic Hquid crystal aromatic copolyester fiber composed of -hydroxyben2oic acid [99-96-7] and 6-hydroxy-2-naphthoic acid. Other fully aromatic polyester fiber composites have been iatroduced under various tradenames (19). 

Solution Casting. The production of unsupported film and sheet by solution casting has generally passed from favor and is used only for special polymers not amenable to melt processes. The use of solvents was generally very hazardous because of their flammabiUty or toxic nature. The cost of recovery and disposal of solvents became prohibitive for many lower price film appHcations. The nature of the drying operations leads to problems with solvent migration and retention that are not problems with melt-processed polymers. 

Rhenium hexafluoride is a cosdy (ca 3000/kg) material and is often used as a small percentage composite with tungsten or molybdenum. The addition of rhenium to tungsten metal improves the ductility and high temperature properties of metal films or parts (11). Tungsten—rhenium alloys produced by CVD processes exhibit higher superconducting transition temperatures than those alloys produced by arc-melt processes (12). 

Peifluorinated ethylene—piopjiene (FEP) lesin [25067-11-2] is a copolymer of tetiafluoioethylene [116-14-3] (TFE) and hexafluoiopiopylene [116-15-4] (HEP) thus its blanched stmctuie contains units of —CF2—CF2— and units of —CF2—CF(CF2)—. It retains most of the desirable characteristics of polytetrafluoroethylene (PTFE) but with a melt viscosity low enough for conventional melt processing. The introduction of hexafluoropropylene lowers the melting point of PTFE from 325°C to about 260°C. 

As a tme thermoplastic, FEP copolymer can be melt-processed by extmsion and compression, injection, and blow molding. Films can be heat-bonded and sealed, vacuum-formed, and laminated to various substrates. Chemical inertness and corrosion resistance make FEP highly suitable for chemical services its dielectric and insulating properties favor it for electrical and electronic service and its low frictional properties, mechanical toughness, thermal stabiUty, and nonstick quaUty make it highly suitable for bearings and seals, high temperature components, and nonstick surfaces. 

Hexafluoiopiopylene and tetiafluoioethylene aie copolymerized, with trichloiacetyl peroxide as the catalyst, at low temperature (43). Newer catalytic methods, including irradiation, achieve copolymerization at different temperatures (44,45). Aqueous and nonaqueous dispersion polymerizations appear to be the most convenient routes to commercial production (1,46—50). The polymerization conditions are similar to those of TFE homopolymer dispersion polymerization. The copolymer of HFP—TFE is a random copolymer that is, HFP units add to the growing chains at random intervals. The optimal composition of the copolymer requires that the mechanical properties are retained in the usable range and that the melt viscosity is low enough for easy melt processing. 

Gases and vapors permeate FEP resin at a rate that is considerably lower than that of most plastics. Because FEP resins are melt processed, they are void-free and permeation occurs only by molecular diffusion. Variation in crystallinity and density is limited, except in unusual melt-processing conditions. 

Peifluoioalkoxy (PFA) fluoiocaibon lesins aie designed to meet industry s needs in chemical, electrical, and mechanical appHcations. These melt processible copolymers contain a fluorocarbon backbone in the main chain and randomly distributed perfluorinated ether side chains ... 

The polymer is separated from the medium and converted to usehil forms such as melt-extmded cubes for melt processible appHcations. Teflon PEA is also available as a dispersion, a fine powder, or in unmelted bead form. 

This article focuses on the commercial, ethylene-based ionomers and includes information on industrial uses and manufacture. The fluorinated polymers used as membranes are frequently included in ionomer reviews. Owing to the high concentration of polar groups, these polymers are generally not melt processible and are specially designed for specific membrane uses (see Fluorine compounds, organic—perfluoroalkane sulfonic acids Membrane technology). 

A process based on saponification of ethylene—acrylate ester copolymers has been practiced commercially in Japan (29). The saponification naturally produces fully neutralized polymer, and it is then necessary to acidify in order to obtain a pardy neutralized, melt-processible product. Technology is described to convert the sodium ionomer produced by this process to the zinc type by soaking pellets in zinc acetate solution, followed by drying (29). 

Ethylene—Dicarboxylic Acid Copolymers. Partial neutralization of copolymers containing carboxyls in pairs on adjacent carbons, eg, ethylene—maleic acid, has been described (11). Surprisingly, there is no increase in stiffness related to neutralization. Salts with divalent metal cations are not melt processible. The close spacing of the paired carboxyl groups has resulted in ionic cluster morphology which is distinct from that of the commercial ionomer family. 

EPDM-Derived Ionomers. Another type of ionomer containing sulfonate, as opposed to carboxyl anions, has been obtained by sulfonating ethylene—propjlene—diene (EPDM) mbbers (59,60). Due to the strength of the cross-link, these polymers are not inherently melt-processible, but the addition of other metal salts such as zinc stearate introduces thermoplastic behavior (61,62). These interesting polymers are classified as thermoplastic elastomers (see ELASTOLffiRS,SYNTHETIC-THERMOPLASTICELASTOLffiRS). 

The volume of hulls generated is nominally 62 m /1 of fuel, which is about 10 times the actual volume of metal. Whereas they are not yet in commercial use, both compaction and melting processes are being developed to improve waste handling economics (41). 

The packaging (qv) requirements for shipping and storage of thermoplastic resins depend on the moisture that can be absorbed by the resin and its effect when the material is heated to processing temperatures. Excess moisture may result in undesirable degradation during melt processing and inferior properties. Condensation polymers such as nylons and polyesters need to be specially predried to very low moisture levels (3,4), ie, less than 0.2% for nylon-6,6 and as low as 0.005% for poly(ethylene terephthalate) which hydrolyzes faster. 

Polyamides, often also lefeiied to as nylons, are liigli polymers which contain the amide repeat linkage in the polymer backbone. They are generally characterized as tough, translucent, semicrystalline polymers that ate moderately low cost and easily manipulated commercially by melt processing. 

Transesterification. There has been renewed interest in the transesterification process for preparation of polycarbonate because of the desire to transition technology to environmentally friendly processes. The transesterification process utilizes no solvent during polymerization, producing neat polymer direcdy and thus chlorinated solvents may be entirely eliminated. General Electric operates a polycarbonate plant in Chiba, Japan which produces BPA polycarbonate via this melt process. 

---