Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Melt-processable rubber

Single phase melt-processable rubber, DuPont (Alcryn)... [Pg.103]

Wallace J.G., Single phase melt processible rubber. Handbook of Thermoplastic Elastomer (Walker B.M. and Rader C.P., eds.). Van Nostrand Reinhold, New York, 1988, 141. [Pg.157]

Naskar, A.K., Bhowmick, A.K., and De, S.K., Melt-processable rubber Chlorinated waste tire rubber-filled polyvinyl chloride, J. Appl. Polym. Sci., 84, 622, 2002. [Pg.1064]

MPR (Melt Processable Rubber), a blend of vinylidene chloride and crosslinked EVA,... [Pg.659]

U.S. Pat. No. 6,617,376 [91] (Crane Plastics Co., TimberTech) discloses a cellulosic composite comprising about 20% to about 55% by weight of a cellulosic material, 45-80% by weight of chlorinated polyethylene, and melt-processing rubbers. [Pg.88]

Melt-processing rubbers, 88 Merpan, 449 Mesh screening, 99 Mesh size, 99, 107, 473 Metablens series C/E, S, W, 173 MetablenTM A3000, 173 Metal catalysts, 522... [Pg.687]

MPR melt-processable rubber MVE methyl vinyl ether... [Pg.603]

Key attributes melt processability, rubber elasticity, low temperature... [Pg.1794]

In a typical formulation, an ethylene-n-butylacrylate-carbon monoxide (60/30/ 10) terpolymer (60 wt%) is melt compounded in a twin-screw extmder with PVC (30 wt%) along with an optional, nonvolatile plasticizer such as trioctyl trimellitate (10 wt%) such that the ethylene terpolymer dispersion was cured in situ during the mixing by catalytic amounts of a suitable peroxide (0.3 %) and a bismaleimide crosslink promoter (0.2 %). It is believed that the initial homogeneous miscible melt blend later forms the micro phase-separated mbber domains as the selective rubber cross-Unking progresses. Currently, such TPV blends are commercially sold as Alcryn melt-processable rubbers by Advanced Polymer Alloys division of Ferro. [Pg.1796]

Melt-processable rubber poly(a-methyl styrene)... [Pg.2162]

Acrylyn Melt-processable rubber E. I. du Pont de Nemours... [Pg.2282]

Alcryn (Advanced Polymer Alloys Division of Ferro Corporation) is an example of a melt-processable rubber. These are partially cross-linked halogenated polyolefin MPR blends. The specific gravity ranges from 1.08 to 1.35. [Pg.342]

The TPE polyolefin copolymers and blends (including stereo-copolymers [7]), as well as the reactive rubber-plastic blends, dynamically vulcanized TPEs, and melt-processible rubbers are beyond the scope of this chapter. [Pg.77]

See other pages where Melt-processable rubber is mentioned: [Pg.104]    [Pg.114]    [Pg.114]    [Pg.164]    [Pg.74]    [Pg.653]    [Pg.653]    [Pg.699]    [Pg.894]    [Pg.116]    [Pg.135]    [Pg.778]    [Pg.265]    [Pg.132]    [Pg.135]    [Pg.136]    [Pg.141]    [Pg.141]    [Pg.213]    [Pg.1118]    [Pg.153]    [Pg.342]    [Pg.620]    [Pg.421]    [Pg.473]    [Pg.844]    [Pg.208]    [Pg.371]   
See also in sourсe #XX -- [ Pg.114 ]

See also in sourсe #XX -- [ Pg.74 , Pg.109 , Pg.134 , Pg.139 , Pg.152 , Pg.699 ]

See also in sourсe #XX -- [ Pg.342 ]



SEARCH



MELT PROCESSING

Melt processability

Melt-processible

Processing melting

Rubber melting

Rubber processing

Rubbers processability

© 2024 chempedia.info