Health manufacture

All aspects encompasses a broad industry or field within the workplace. Illustrative fields include agriculture, business, construction, conununication, community services, health, manufacturing, marketing, and transportation. 

The health and safety issues outlined herein for particleboard also apply to MDE. A special note should be made of the fact that, because the MDF raw material is of dry fiber base, there exists in MDF a large component of very small, broken, dust-like wood fibers. These contribute to the dust concerns in the manufacturing areas, requiring exceUent dust-control systems, good housekeeping, and personal protection. 

To an experienced operator trained in the handling of industrial chemicals, the dimers present Httle cause for concern in handling or storage. The finished polymer coating presents even less of a health problem contact with the reactive monomer is unlikely. In the ancillary operations, such as cleaning or adhesion promotion, the operator must observe suitable precautions. Before using the process chemicals, operators must read and understand the current Material Safety Data Sheets, which are available from the manufacturers. 

When processed and used according to manufacturer s recommendations, acetal resins present no extraordinary health risks. Before the use of any plastic material, including acetal, the Material Safety Data Sheet (MSDS) appHcable to the grade in question should be consulted. 

Potential health and safety problems of acryflc polymers occur in their manufacture (159). During manufacture, considerable care is exercised to reduce the potential for violent polymerizations and to reduce exposure to flammable and potentially toxic monomers and solvents. Recent environmental legislation governing air quality has resulted in completely closed ketde processes for most acryflc polymerizations. Acryflc solution polymers are treated as flammable mixtures. Dispersion polymers are nonflammable. 

Health and safety information is available from the manufacturer of every adhesive sold in the United States. The toxicology of a particular adhesive is dependent upon its components, which mn the gamut of polymeric materials from natural products which often exhibit low toxicity to isocyanates which can cause severe allergic reactions. Toxicological information may be found in articles discussing the manufacture of the specific chemical compounds that comprise the adhesives. 

Lead Azide. The azides belong to a class of very few useflil explosive compounds that do not contain oxygen. Lead azide is the primary explosive used in military detonators in the United States, and has been intensively studied (see also Lead compounds). However, lead azide is being phased out as an ignition compound in commercial detonators by substances such as diazodinitrophenol (DDNP) or PETN-based mixtures because of health concerns over the lead content in the fumes and the explosion risks and environmental impact of the manufacturing process. 

J. A. Hathaway and C. R. Buck, "Report of Absence of Health Ha2ards Associated with RDX Manufacture and Use in Shell Loading Plants," in Minutes of 17th Explosives Safety Seminar, Dept, of Defense Explosives Safety Board, Washington, D.C., 1976, p. 683. 

Amino and Phenolic Resins. The largest use of formaldehyde is in the manufacture of urea—formaldehyde, phenol—formaldehyde, and melamine—formaldehyde resins, accounting for over one-half (51%) of the total demand (115). These resins find use as adhesives for binding wood products that comprise particle board, fiber board, and plywood. Plywood is the largest market for phenol—formaldehyde resins particle board is the largest for urea—formaldehyde resins. Under certain conditions, urea—formaldehyde resins may release formaldehyde that has been alleged to create health or environmental problems (see Amino RESINS AND PLASTICS). 

Extmsion is a common way for soHd products such as plastics to emerge from closed manufacturing systems. Normally a polymer is hot when extmded and may contain additives and oligomers that are volatile at elevated tempera-tures. The result is Aiming at the extmder head. These fumes can result in employee annoyance, housekeeping problems, and, at worst, depending on composition, health ha2ards. 

Chemical Manufacturers Association, Improving Air Quality Guidance for Estimating Fugitive Emissions from Equipment, 2nd ed., CMA, Washington, D.C., 1989. Chemical Manufacturers Association, Responsible Care, Employee Health and Safety Code of Management Practices, CMA, Washington, D.C., 1992. 

The latest government regulations set forth under the Toxic Substances Control Act and in PubHc Health Service pubHcations should be checked before formulating new lubricants. Users of lubricants should request Material Safety Data Sheets for each substance involved plus certification of compliance from vendors. Lubricant compounders should insist on similar information from their suppHers for any additive packages. Manufacturers of both additives and lubricants commonly make toxicity checks on commercial products. 

Conduct Hazard Analysis and Risk Assessment. Ahazardis any biological, chemical, or physical property that may cause an unacceptable consumer health risk. AH of the potential hazards in the food chain are analyzed, from growing and harvesting or slaughtering to manufacturing, distribution, retailing, and consumption of the product. 

C. H. Swanson, Statementfor the Health Industry Manufacturers Association, before the House Government Operations Subcommittee in Information, Justice, Transportation, and Agriculture, Washington, D.C., Oct. 5, 1994. 

LLDPE by itself does not present any health-related hazard on account of its chemical inertness and low toxicity. Consequently, film, containers, and container Hds made from LLDPE are used on a large scale in food and dmg packaging. Some LLDPE grades produced with unsupported metallocene catalysts have an especially high purity due to high catalyst productivity and a low contamination level of resins with catalyst residue. FDA approved the use of film manufactured from these resins for food contact and for various medical appHcations (80). However, if LLDPE articles contain fillers, processing aids, or colorants, thek health factors must then be judged separately. 

Health and Safety. Remover formulas that are nonflammable may be used in any area that provides adequate ventilation. Most manufacturers recommend a use environment of 50—100 parts per million (ppm) time weighted average (TWA). The environment can be monitored with passive detection badges or by active air sampling and charcoal absorption tube analysis. The vapor of methylene chloride produces hydrogen chloride and phosgene gas when burned. Methylene chloride-type removers should not be used in the presence of an open flame or other heat sources such as kerosene heaters (8). 

---