Epoxides asymmetric epoxidation

Asymmetric Epoxidation. Asymmetric epoxidation of nonfunctionalized alkenes manifests a great synthetic challenge. The most successful method of asymmetric epoxidation, developed by Katsuki and Sharpless,332 employs a Ti(IV) alkoxide [usually Ti(OisoPr)4], an optically active dialkyl tartrate, and tert-BuOOH. This procedure, however, was designed to convert allylic alcohols to epoxy alcohols, and the hydroxyl group plays a decisive role in attaining high degree of enantiofa-cial selectivity.333,334 Without such function, the asymmetric epoxidation of simple olefins has been only moderately successful 335... 

JULI A-COLONNA Asymmetric Epoxidation Asymmetric epoxidation of electron-poor olefins catalyzed by poly-a amino acids. 

Epoxidation. Asymmetric epoxidation has been an active area of research, and many... 

The first practical method for asymmetric epoxidation of primary and secondary allylic alcohols was developed by K.B. Sharpless in 1980 (T. Katsuki, 1980 K.B. Sharpless, 1983 A, B, 1986 see also D. Hoppe, 1982). Tartaric esters, e.g., DET and DIPT" ( = diethyl and diisopropyl ( + )- or (— )-tartrates), are applied as chiral auxiliaries, titanium tetrakis(2-pro-panolate) as a catalyst and tert-butyl hydroperoxide (= TBHP, Bu OOH) as the oxidant. If the reaction mixture is kept absolutely dry, catalytic amounts of the dialkyl tartrate-titanium(IV) complex are suflicient, which largely facilitates work-up procedures (Y. Gao, 1987). Depending on the tartrate enantiomer used, either one of the 2,3-epoxy alcohols may be obtained with high enantioselectivity. The titanium probably binds to the diol grouping of one tartrate molecule and to the hydroxy groups of the bulky hydroperoxide and of the allylic alcohol... 

The method has been applied in asymmetric and regioselective syntheses of several natural compounds. Two simple examples are the commercial syntheses of the gipsy moth hydrophobic sex attractant, disparlure (RE. Rossiter, 1981, 1985) and < mono-epoxidation of a diene in a leukotriene B4 synthesis (L.S. Mills, 1983). 

A catalytic enantio- and diastereoselective dihydroxylation procedure without the assistance of a directing functional group (like the allylic alcohol group in the Sharpless epox-idation) has also been developed by K.B. Sharpless (E.N. Jacobsen, 1988 H.-L. Kwong, 1990 B.M. Kim, 1990 H. Waldmann, 1992). It uses osmium tetroxide as a catalytic oxidant (as little as 20 ppm to date) and two readily available cinchona alkaloid diastereomeis, namely the 4-chlorobenzoate esters or bulky aryl ethers of dihydroquinine and dihydroquinidine (cf. p. 290% as stereosteering reagents (structures of the Os complexes see R.M. Pearlstein, 1990). The transformation lacks the high asymmetric inductions of the Sharpless epoxidation, but it is broadly applicable and insensitive to air and water. Further improvements are to be expected. 

In all cases examined the ( )-isomers of the allylic alcohols reacted satisfactorily in the asymmetric epoxidation step, whereas the epoxidations of the (Z)-isomers were intolerably slow or nonstereoselective. The eryfhro-isomers obtained from the ( )-allylic alcohols may, however, be epimerized in 95% yield to the more stable tlireo-isomers by treatment of the acetonides with potassium carbonate (6a). The competitive -elimination is suppressed by the acetonide protecting group because it maintains orthogonality between the enolate 7i-system and the 8-alkoxy group (cf the Baldwin rules, p. 316). 

Recent syntheses of steroids apply efficient strategies in which open-chain or monocyclic educts with appropiate side-chains are stereoselectively cyclized in one step to a tri- or tetracyclic steroid precursor. These procedures mimic the biochemical synthesis scheme where acyclic, achiral squalene is first oxidized to a 2,3-epoxide containing one chiral carbon atom and then enzymatically cyclized to lanostetol with no less than seven asymmetric centres (W.S. Johnson, 1%8, 1976 E.E. van Tamden, 1968). 

Rossiter, B. E. 1985, Synthetic Aspects and Applications of Asymmetric Epoxidation, in Morrison, J. D. 

Epoxides typically exhibit three bands Two bands one at 810-950 cm and the other near 1250 cm correspond to asymmetric and symmetric stretching of the ring respectively The third band appears m the range 750-840 cm ... 

Fig. 8. Use of Sharpless asymmetric epoxidation for the preparation of an intermediate in the synthesis of FK-506 (105), where represents the chiral...

This chemical bond between the metal and the hydroxyl group of ahyl alcohol has an important effect on stereoselectivity. Asymmetric epoxidation is weU-known. The most stereoselective catalyst is Ti(OR) which is one of the early transition metal compounds and has no 0x0 group (28). Epoxidation of isopropylvinylcarbinol [4798-45-2] (1-isopropylaHyl alcohol) using a combined chiral catalyst of Ti(OR)4 and L-(+)-diethyl tartrate and (CH2)3COOH as the oxidant, stops at 50% conversion, and the erythro threo ratio of the product is 97 3. The reason for the reaction stopping at 50% conversion is that only one enantiomer can react and the unreacted enantiomer is recovered in optically pure form (28). 

Enzymatic hydrolysis of A/-acylamino acids by amino acylase and amino acid esters by Hpase or carboxy esterase (70) is one kind of kinetic resolution. Kinetic resolution is found in chemical synthesis such as by epoxidation of racemic allyl alcohol and asymmetric hydrogenation (71). New routes for amino acid manufacturing are anticipated. 

Transition metal-catalyzed epoxidations, by peracids or peroxides, are complex and diverse in their reaction mechanisms (Section 5.05.4.2.2) (77MI50300). However, most advantageous conversions are possible using metal complexes. The use of t-butyl hydroperoxide with titanium tetraisopropoxide in the presence of tartrates gave asymmetric epoxides of 90-95% optical purity (80JA5974). 

Asymmetric epoxidation of racemic unsaturated fluoro alcohols by the chiral Sharpless reagent can be exploited for kmetic resolution of enantiomers The recovered stereoisomer has 14-98% enantiomeric excess [55] (equation 50)... 

In addition, NaOMe, and NaNH2, have also been employed. Applieation of phase-transfer conditions with tetra-n-butylammonium iodide showed marked improvement for the epoxide formation. Furthermore, many complex substituted sulfur ylides have been synthesized and utilized. For instance, stabilized ylide 20 was prepared and treated with a-D-a/lo-pyranoside 19 to furnish a-D-cyclopropanyl-pyranoside 21. Other examples of substituted sulfur ylides include 22-25, among which aminosulfoxonium ylide 25, sometimes known as Johnson s ylide, belongs to another category. The aminosulfoxonium ylides possess the configurational stability and thermal stability not enjoyed by the sulfonium and sulfoxonium ylides, thereby are more suitable for asymmetric synthesis. 

Since cbiral sulfur ylides racemize rapidly, they are generally prepared in situ from chiral sulfides and halides. The first example of asymmetric epoxidation was reported in 1989, using camphor-derived chiral sulfonium ylides with moderate yields and ee (< 41%) Since then, much effort has been made in tbe asymmetric epoxidation using sucb a strategy without a significant breakthrough. In one example, the reaction between benzaldehyde and benzyl bromide in the presence of one equivalent of camphor-derived sulfide 47 furnished epoxide 48 in high diastereoselectivity (trans cis = 96 4) with moderate enantioselectivity in the case of the trans isomer (56% ee). ... 

The first asymmetric Mn(salen)-catalyzed epoxidation of silyl enol ethers was carried out by Reddy and Thornton in 1992. Results from the epoxidation of various silyl enol ethers gave the corresponding keto-alcohols in up to 62% ee Subsequently, Adam and Katsuki " independently optimized the protocol for these substrates yielding products in excellent enantioselectivity. 

The asymmetric epoxidation of electron-poor cinnamate ester derivatives was highlighted by Jacobsen in the synthesis of the Taxol side-chain. Asymmetric epoxidation of ethyl cinnamate provided the desired epoxide in 96% ee and in 56% yield. Epoxide ring opening with ammonia followed by saponification and protection provided the Taxol side-chain 46 (Scheme 1.4.12). 

CDP840 is a selective inhibitor of the PDE-IV isoenzyme and interest in the compound arises from its potential application as an antiasthmatic agent. Chemists at Merck Co. used the asymmetric epoxidation reaction to set the stereochemistry of the carbon framework and subsequently removed the newly established C-O bonds." Epoxidation of the trisubstituted olefin 51 provided the desired epoxide in 89% ee and in 58% yield. Reduction of both C-O bonds was then accomplished to provide CDP840. 

Boger et al. prepared Duocarmycin SA via asymmetric epoxidation of a cyclic olefin 54." The stereochemistry set by the epoxidation step was used for subsequent C-C bond forming reactions. Epoxidation of olefin 54 was carried at -78°C to provide... 

The Sharpless-Katsuki asymmetric epoxidation reaction (most commonly referred by the discovering scientists as the AE reaction) is an efficient and highly selective method for the preparation of a wide variety of chiral epoxy alcohols. The AE reaction is comprised of four key components the substrate allylic alcohol, the titanium isopropoxide precatalyst, the chiral ligand diethyl tartrate, and the terminal oxidant tert-butyl hydroperoxide. The reaction protocol is straightforward and does not require any special handling techniques. The only requirement is that the reacting olefin contains an allylic alcohol. 

In 1980, Katsuki and Sharpless communicated that the epoxidation of a variety of allylic alcohols was achieved in exceptionally high enantioselectivity with a catalyst derived from titanium(IV) isopropoxide and chiral diethyl tartrate. This seminal contribution described an asymmetric catalytic system that not only provided the product epoxide in remarkable enantioselectivity, but showed the immediate generality of the reaction by examining 5 of the 8 possible substitution patterns of allylic alcohols all of which were epoxidized in >90% ee. Shortly thereafter. Sharpless and others began to illustrate the... 

Catalytic asymmetric epoxidation and aziridination mediated by sulfur ylides 98SL329. 

Epoxide-hydrolases as asymmetric catalysts for ring opening of oxiranes 97T15617. 

Asymmetric catalytic epoxidation of allylic alcohols 93MI2. 

Asymmetric catalytic epoxidation of nonfunctionalized olefins 93MI3, 98MI1. 

In mosl allylation reactions, only a catalytic amount of CuCN-2LiCl is required [41]. Use of die chiral ferrocenylamine 104 as a catalyst makes enables asymmetric allylation of diorganozinc reagents to be effected witli allylic chlorides iScbeme 2.3G) [78]. Related electropb des such as propargylic bromides [79] and unsaturated epoxides [80] also undergo Su2 -substitution reactions iScbeme 2.37). 

Asymmetric ring-opening of saturated epoxides by organoctiprates has been studied, hut only low enantioselectivities f -c 1596 ee) have so far been obtained [49, 50]. Muller et al., for example, have reported that tlie reaction between cyclohexene oxide and MeMgBr, catalyzed by 1096 of a chiral Schiffhase copper complex, gave froiis-2-metliylcyclohexanol in 5096 yield and with 1096 ee [50]. 

The asymmetric epoxidation of an allylic alcohol 1 to yield a 2,3-epoxy alcohol 2 with high enantiomeric excess, has been developed by Sharpless and Katsuki. This enantioselective reaction is carried out in the presence of tetraisopropoxyti-tanium and an enantiomerically pure dialkyl tartrate—e.g. (-1-)- or (-)-diethyl tartrate (DET)—using tcrt-butyl hydroperoxide as the oxidizing agent. 

The Best results are obtained with cA-alkenes however, the epoxidation of tri-and tetra-substituted double bonds is also possible. Because of its versatility, the Jacobsen-Katsuki epoxidation is an important method in asymmetric synthesis. 

---