Oxidation reactions asymmetric epoxidation

Related reactions Jacobsen-Katsuki epoxidation, Prilezhaev oxidation, Rubottom oxidation, Sharpless asymmetric epoxidation, Shi... 

In the field of asymmetric oxidation reactions the epoxidation of a,P-unsatu-rated carbonyl compounds was investigated. In the case of 1,4-naphthoquinone derivatives and terf-butyl hydroperoxide as reagents enantioselectivities up to 78% ee were observed with quininium and quinidinium salts as PT catalysts [40]. 

In the presence of the sodium-containing heterobimetallic catalyst (R)-LSB (10 mol%), the reaction of enone 52 with TBHP (2 equiv) was found to give the desired epoxide with 83% ee and in 92% yield [56]. Unfortunately LSB as well as other bimetallic catalysts were not useful for many other enones. Interestingly, in marked contrast to LSB an alkali metal free lanthanoid BINOL complex, which was prepared from Ln(0- -Pr)3 and (R)-BINOL or a derivative thereof (1 or 1.25 molar equiv) in the presence of MS 4A (Scheme 17), was found to be applicable to a range of enone substrates. Regarding enones with an aryl-substitu-ent in the a-keto position, the most effective catalytic system was revealed when using a lanthanum-(.R/)-3-hydroxymethyl-BINOL complex La-51 (l-5mol%) and cumene hydroperoxide (CMHP) as oxidant. The asymmetric epoxidation proceeded with excellent enantioselectivities (ees between 85 and 94%) and yields up to 95%. 

The first practical method for asymmetric epoxidation of primary and secondary allylic alcohols was developed by K.B. Sharpless in 1980 (T. Katsuki, 1980 K.B. Sharpless, 1983 A, B, 1986 see also D. Hoppe, 1982). Tartaric esters, e.g., DET and DIPT" ( = diethyl and diisopropyl ( + )- or (— )-tartrates), are applied as chiral auxiliaries, titanium tetrakis(2-pro-panolate) as a catalyst and tert-butyl hydroperoxide (= TBHP, Bu OOH) as the oxidant. If the reaction mixture is kept absolutely dry, catalytic amounts of the dialkyl tartrate-titanium(IV) complex are suflicient, which largely facilitates work-up procedures (Y. Gao, 1987). Depending on the tartrate enantiomer used, either one of the 2,3-epoxy alcohols may be obtained with high enantioselectivity. The titanium probably binds to the diol grouping of one tartrate molecule and to the hydroxy groups of the bulky hydroperoxide and of the allylic alcohol... 

This chemical bond between the metal and the hydroxyl group of ahyl alcohol has an important effect on stereoselectivity. Asymmetric epoxidation is weU-known. The most stereoselective catalyst is Ti(OR) which is one of the early transition metal compounds and has no 0x0 group (28). Epoxidation of isopropylvinylcarbinol [4798-45-2] (1-isopropylaHyl alcohol) using a combined chiral catalyst of Ti(OR)4 and L-(+)-diethyl tartrate and (CH2)3COOH as the oxidant, stops at 50% conversion, and the erythro threo ratio of the product is 97 3. The reason for the reaction stopping at 50% conversion is that only one enantiomer can react and the unreacted enantiomer is recovered in optically pure form (28). 

The Sharpless-Katsuki asymmetric epoxidation reaction (most commonly referred by the discovering scientists as the AE reaction) is an efficient and highly selective method for the preparation of a wide variety of chiral epoxy alcohols. The AE reaction is comprised of four key components the substrate allylic alcohol, the titanium isopropoxide precatalyst, the chiral ligand diethyl tartrate, and the terminal oxidant tert-butyl hydroperoxide. The reaction protocol is straightforward and does not require any special handling techniques. The only requirement is that the reacting olefin contains an allylic alcohol. 

The asymmetric epoxidation of an allylic alcohol 1 to yield a 2,3-epoxy alcohol 2 with high enantiomeric excess, has been developed by Sharpless and Katsuki. This enantioselective reaction is carried out in the presence of tetraisopropoxyti-tanium and an enantiomerically pure dialkyl tartrate—e.g. (-1-)- or (-)-diethyl tartrate (DET)—using tcrt-butyl hydroperoxide as the oxidizing agent. 

SAE reaction see Sharpless asymmetric epoxidation Saegusa oxidation 390 samarium diiodide 496, 633, 638 saponification 49, 207 sativene 382 f. 

The Sharpless-Katsuki asymmetric epoxidation (AE) procedure for the enantiose-lective formation of epoxides from allylic alcohols is a milestone in asymmetric catalysis [9]. This classical asymmetric transformation uses TBHP as the terminal oxidant, and the reaction has been widely used in various synthetic applications. There are several excellent reviews covering the scope and utility of the AE reaction... 

By studying the NMR spectra of the products, Jensen and co-workers were able to establish that the alkylation of (the presumed) [Co (DMG)2py] in methanol by cyclohexene oxide and by various substituted cyclohexyl bromides and tosylates occurred primarily with inversion of configuration at carbon i.e., by an 8 2 mechanism. A small amount of a second isomer, which must have been formed by another minor pathway, was observed in one case (95). Both the alkylation of [Co (DMG)2py] by asymmetric epoxides 129, 142) and the reduction of epoxides to alcohols by cobalt cyanide complexes 105, 103) show preferential formation of one isomer. In addition, the ratio of ketone to alcohol obtained in the reaction of epoxides with [Co(CN)5H] increases with pH and this has been ascribed to differing reactions with the hydride (reduction to alcohol) and Co(I) (isomerization to ketone) 103) (see also Section VII,C). 

The complex Pd-(-)-sparteine was also used as catalyst in an important reaction. Two groups have simultaneously and independently reported a closely related aerobic oxidative kinetic resolution of secondary alcohols. The oxidation of secondary alcohols is one of the most common and well-studied reactions in chemistry. Although excellent catalytic enantioselective methods exist for a variety of oxidation processes, such as epoxidation, dihydroxy-lation, and aziridination, there are relatively few catalytic enantioselective examples of alcohol oxidation. The two research teams were interested in the metal-catalyzed aerobic oxidation of alcohols to aldehydes and ketones and became involved in extending the scopes of these oxidations to asymmetric catalysis. 

Urea hydrogen peroxide adduct (UHP) was employed in metal-catalysed asymmetric epoxidation [98] and Baeyer-Villiger oxidation [99,100]. Since the presence of urea does not change the course of the reaction, this will not be described here. Conversion of epoxides to halohydrins with elemental... 

Jacobsen (1999) has carried out carbomethoxylation of asymmetric epoxides. Thus, the carbomethoxylation of (R)-propylene oxide with CO and methanol yields 92% of (3R)-hydroxybutanoic acid in greater than 99% ee. Similarly, the reaction of (/ )-epichlorohydrin gives 96% of 4-chloro-(3R)-hydroxybutanoic acid in greater than 99% ee. The catalyst consists of dicobalt octacarbonyl and 3-hydroxy pyridine. A continuous process for making enantiomeric 1-chloro-2-propanol has been suggested. With a suitable catalyst propylene reacts with O2, water, cupric and lithium chloride to give 78% of (S)-l-chloro-2-propanol in 94% ee. 

Besides ruthenium porphyrins (vide supra), several other ruthenium complexes were used as catalysts for asymmetric epoxidation and showed unique features 114,115 though enantioselectivity is moderate, some reactions are stereospecific and treats-olefins are better substrates for the epoxidation than are m-olcfins (Scheme 20).115 Epoxidation of conjugated olefins with the Ru (salen) (37) as catalyst was also found to proceed stereospecifically, with high enantioselectivity under photo-irradiation, irrespective of the olefmic substitution pattern (Scheme 21).116-118 Complex (37) itself is coordinatively saturated and catalytically inactive, but photo-irradiation promotes the dissociation of the apical nitrosyl ligand and makes the complex catalytically active. The wide scope of this epoxidation has been attributed to the unique structure of (37). Its salen ligand adopts a deeply folded and distorted conformation that allows the approach of an olefin of any substitution pattern to the intermediary oxo-Ru species.118 2,6-Dichloropyridine IV-oxide (DCPO) and tetramethylpyrazine /V. V -dioxide68 (TMPO) are oxidants of choice for this epoxidation. 

The oxidation of enol ethers and their derivatives is a useful method for the synthesis of a-hydroxy-ketones or their derivatives, which are versatile building blocks for organic synthesis. Since enol ethers and esters are types of olefin, some asymmetric epoxidation and dihydroxylation reactions have been applied to their oxidation. 

Following the success with the titanium-mediated asymmetric epoxidation reactions of allylic alcohols, work was intensified to seek a similar general method that does not rely on allylic alcohols for substrate recognition. A particularly interesting challenge was the development of catalysts for enantioselective oxidation of unfunctionalized olefins. These alkenes cannot form conformationally restricted chelate complexes, and consequently the differentiation of the enan-tiotropic sides of the substrate is considerably more difficult. 

It is now clear that asymmetric catalytic hydrogenation is rather successful. However, the initial research work of Sharpless [5] in the asymmetric epoxidation, followed by the results of Jacobsen et al. [6] opened large opportunities for liquid-phase asymmetric oxidation. Sharpless epoxidation has been widely applied in bench-scale organic synthesis, and more recently, salene derivatives emerged among the most effective catalysts in this reaction [7,8],... 

Further variations on the epoxyketone intermediate theme have been reported. In the first (Scheme 9A) [78], limonene oxide was prepared by Sharpless asymmetric epoxidation of commercial (S)-(-)- perillyl alcohol 65 followed by conversion of the alcohol 66 to the crystalline mesylate, recrystallization to remove stereoisomeric impurities, and reduction with LiAlH4 to give (-)-limonene oxide 59. This was converted to the key epoxyketone 60 by phase transfer catalyzed permanganate oxidation. Control of the trisubstituted alkene stereochemistry was achieved by reaction of the ketone with the anion from (4-methyl-3-pentenyl)diphenylphosphine oxide, yielding the isolable erythro adduct 67, and the trisubstituted E-alkene 52a from spontaneous elimination by the threo adduct. Treatment of the erythro adduct with NaH in DMF resulted... 

An important breakthrough in asymmetric epoxidation has been the Katsuki-Sharpless invention [1], The reaction uses a chiral Ti(IV) catalyst, t-butylhydroperoxide as the oxidant and it works only for allylic alcohols as the substrate. In the first report titanium is applied in a stoichiometric amount. The chirality is introduced in the catalyst by reacting titanium tetra-isopropoxide... 

Scheme 8 summarizes the introduction of the missing carbon atoms and the diastereoselective epoxidation of the C /C double bond using a Sharpless asymmetric epoxidation (SAE) of the allylic alcohol 64. The primary alcohol 62 was converted into the aldehyde 63 which served as the starting material for a Horner-Wadsworth-Emmons (HWE) reaction to afford an E-configured tri-substituted double bond. The next steps introduced the sulfone moiety via a Mukaiyama redox condensation and a subsequent sulfide to sulfone oxidation. The sequence toward the allylic alcohol 64 was com-... 

The catalytic asymmetric epoxidation of a,p-unsaturated aldehydes has also been an important challenge in iminium catalysis and for chemical synthesis in general. More recently, Jprgensen and coworkers have developed an asymmetric organocatalytic approach to ot, (3-epoxy aldehydes using pyrrolidine catalyst 20 and H2O2 as the stoichiometric oxidant. The reaction appears to be extremely general and will likely receive wide attention from the chemical synthesis community (Scheme 11.6b). 

Asymmetric epoxidation of olefins is an effective approach for the synthesis of enan-tiomerically enriched epoxides. A variety of efficient methods have been developed [1, 2], including Sharpless epoxidation of allylic alcohols [3, 4], metal-catalyzed epoxidation of unfunctionalized olefins [5-10], and nucleophilic epoxidation of electron-deficient olefins [11-14], Dioxiranes and oxazirdinium salts have been proven to be effective oxidation reagents [15-21], Chiral dioxiranes [22-28] and oxaziridinium salts [19] generated in situ with Oxone from ketones and iminium salts, respectively, have been extensively investigated in numerous laboratories and have been shown to be useful toward the asymmetric epoxidation of alkenes. In these epoxidation reactions, only a catalytic amount of ketone or iminium salt is required since they are regenerated upon epoxidation of alkenes (Scheme 1). 

In conjunction with the chiral anion TRIP (156) (10 mol%), diamine 157 (10 mol%) can be used in the catalytic asymmetric epoxidation of a,p-unsaturated ketones (>90% ee) [196], while the secondary amine 158 (10 mol%) can be used for the epoxidation of both di- and trisubstituted a,P-unsaturated aldehydes (92-98% ee) (Fig. 15) [211], The facile nature of these reactions, using commercially available peroxides as the stoichiometric oxidant, together with the synthetic utility of the epoxide products suggests application in target oriented synthesis. 

---