Copolymers ethylene/styrene

The possibility of a controlled degradation of polystyrene in copolymer [ethylene styrene] has been examined by selective hydrogenolysis of appended groups, minimizing the cleavage of the main chain [62]. 

C2, C3 Fitting constants in the Gibson and Ahsby equations Mean cell size Mean cell wall thickness Collapse or yield stress Density of the foam Density of the solid polymer Dicumyl peroxide Ethylene vinyl acetate copolymer Ethylene styrene interpolymer Effective diffusion coefficient fraction of material in the struts or edges... 

Fig. 10.29 Plot of Avrami exponent n and crystallization half-time against the isothermal crystallization temperature for the diblock copolymer ethylene-styrene-ethylene-butene = 35 000, weight fraction ethylene 0.14. Squares represent data acquired by synchrotron radiation, circles, data aquired by laboratory-based Kratky camera. (From Loo et al. (65))...

Polyolefin Polyester Block copolymers of styrene and butadiene or styrene and isoprene Block copolymers of styrene and ethylene or styrene and butylene Poly(vinyl chloride) and poly(vinyl acetate) ... 

This type of adhesive is generally useful in the temperature range where the material is either leathery or mbbery, ie, between the glass-transition temperature and the melt temperature. Hot-melt adhesives are based on thermoplastic polymers that may be compounded or uncompounded ethylene—vinyl acetate copolymers, paraffin waxes, polypropylene, phenoxy resins, styrene—butadiene copolymers, ethylene—ethyl acrylate copolymers, and low, and low density polypropylene are used in the compounded state polyesters, polyamides, and polyurethanes are used in the mosdy uncompounded state. 

Many synthetic latices exist (7,8) (see Elastomers, synthetic). They contain butadiene and styrene copolymers (elastomeric), styrene—butadiene copolymers (resinous), butadiene and acrylonitrile copolymers, butadiene with styrene and acrylonitrile, chloroprene copolymers, methacrylate and acrylate ester copolymers, vinyl acetate copolymers, vinyl and vinyUdene chloride copolymers, ethylene copolymers, fluorinated copolymers, acrylamide copolymers, styrene—acrolein copolymers, and pyrrole and pyrrole copolymers. Many of these latices also have carboxylated versions. 

Figure 11.18 Influence of styrene content on properties of ethylene-styrene copolymers (based on...

Since the last edition several new materials have been aimounced. Many of these are based on metallocene catalyst technology. Besides the more obvious materials such as metallocene-catalysed polyethylene and polypropylene these also include syndiotactic polystyrenes, ethylene-styrene copolymers and cycloolefin polymers. Developments also continue with condensation polymers with several new polyester-type materials of interest for bottle-blowing and/or degradable plastics. New phenolic-type resins have also been announced. As with previous editions I have tried to explain the properties of these new materials in terms of their structure and morphology involving the principles laid down in the earlier chapters. 

Currently, important TPE s include blends of semicrystalline thermoplastic polyolefins such as propylene copolymers, with ethylene-propylene terepolymer elastomer. Block copolymers of styrene with other monomers such as butadiene, isoprene, and ethylene or ethylene/propy-lene are the most widely used TPE s. Styrene-butadiene-styrene (SBS) accounted for 70% of global styrene block copolymers (SBC). Currently, global capacity of SBC is approximately 1.1 million tons. Polyurethane thermoplastic elastomers are relatively more expensive then other TPE s. However, they are noted for their flexibility, strength, toughness, and abrasion and chemical resistance. Blends of polyvinyl chloride with elastomers such as butyl are widely used in Japan. ... 

The molecules join together to form a long chain-like molecule which may contain many thousands of ethylene units. Such a molecule is referred to as a polymer, in this case polyethylene, whilst in this context ethylene is referred to as a monomer. Styrene, propylene, vinyl chloride, vinyl acetate and methyl methacrylate are other examples of monomers which can polymerise in this way. Sometimes two monomers may be reacted together so that residues of both are to be found in the same chain. Such materials are known as copolymers and are exemplified by ethylene-vinyl acetate copolymers and styrene-acrylonitrile copolymers. 

An outstanding property of EPS is its extremely low density (when compared to other processes), that by alteration of the preforming treatment can be varied according to the end use. Other types of plastics are employed to produce expandable plastic foam (EPF), including PE, PP, PMMA, and ethylene-styrene copolymers. They can use the same equipment, with only slight modifications. These plastics have different properties from those of EPS and open up different markets. They provide improved sound insulation, resistances to additional heat deformation, better recovery of shapes in moldings, and so on. 

Other commercially relevant monomers have also been modeled in this study, including acrylates, styrene, and vinyl chloride.55 Symmetrical a,dienes substituted with the appropriate pendant functional group are polymerized via ADMET and utilized to model ethylene-styrene, ethylene-vinyl chloride, and ethylene-methyl acrylate copolymers. Since these models have perfect microstructure repeat units, they are a useful tool to study the effects of the functionality on the physical properties of these industrially important materials. The polymers produced have molecular weights in the range of 20,000-60,000, well within the range necessary to possess similar properties to commercial high-molecular-weight material. 

Copolymerization of ethylene and styrene by the INSITE technology from Dow generates a new family of ethylene-styrene interpolymers. Polymers with up to 50-wt% styrene are semicrystalline. The stress-strain behavior of the low-crystallinity polymers at ambient temperature exhibits elastomeric characteristics with low initial modulus, a gradual increase in the slope of the stress-strain curve at the higher strain and the fast instantaneous recovery [67], Similarly, ethylene-butylene copolymers may also be prepared. 

Weiss et al. [75] have synthesized Na and Zn salt of sulfonated styrene(ethylene-co-butylene)-styrene triblock ionomer. The starting material is a hydrogenated triblock copolymer of styrene and butadiene with a rubber mid-block and PS end-blocks. After hydrogenation, the mid-block is converted to a random copolymer of ethylene and butylene. Ethyl sulfonate is used to sulfonate the block copolymer in 1,2-dichloroethane solution at 50°C using the procedure developed by Makowski et al. [76]. The sulfonic acid form of the functionalized polymer is recovered by steam stripping. The neutralization reaction is carried out in toluene-methanol solution using the appropriate metal hydroxide or acetate. 

NR, styrene-butadiene mbber (SBR), polybutadiene rubber, nitrile mbber, acrylic copolymer, ethylene-vinyl acetate (EVA) copolymer, and A-B-A type block copolymer with conjugated dienes have been used to prepare pressure-sensitive adhesives by EB radiation [116-126]. It is not necessary to heat up the sample to join the elastomeric joints. This has only been possible due to cross-linking procedure by EB irradiation [127]. Polyfunctional acrylates, tackifier resin, and other additives have also been used to improve adhesive properties. Sasaki et al. [128] have studied the EB radiation-curable pressure-sensitive adhesives from dimer acid-based polyester urethane diacrylate with various methacrylate monomers. Acrylamide has been polymerized in the intercalation space of montmorillonite using an EB. The polymerization condition has been studied using a statistical method. The product shows a good water adsorption and retention capacity [129]. 

A product is only considered to be totally biodegradable if all its single components can be degraded naturally. Currently, pressure sensitive adhesives (PSA) are mostly based on non-biodegradable synthetic polymers such as polyacrylates, ethylene-vinyl acetate copolymers and styrene block copolymers [124]. Therefore there is a growing demand for the application of biodegradable PSAs on naturally degradable products like paper and cardboard. 

This is just the first example of how the ADMET reaction can be used to model branching behavior and precisely control the structure in olefin-based polymer backbones. Other polymers under study include polyalcohols, polyvinyl acetates, and ethylene-styrene copolymers. The ultimate goal of this research is to be able to define, or even predict, crystallization limits and behavior for many polymers, some of which have not yet been prepared in a crystallized form. 

As an extension of the previous work, copolymers based on partially sulfonated ethylene—styrene pseudorandom interpolymers have also been employed instead of the block copolymers (Figure Due to the unique nature of the polymerization catalyst, styrene residues are separated by at least one ethylene residue and the acid groups are distributed randomly along the chain. This material provides an economical and unique counterpoint to the sulfonated SEES PEMs, where the sulfonic acid groups are bunched together in the styrene blocks. Controlling the styrene content in each material provides a route to control the level of sulfonation and resultant ion exchange capacity of the PEM. 

Insite technology from Dow Chemical has enabled the production of ethyl ethylene-styrene interpolymers (ESI) by copolymerisation of ethylene and styrene monomers. The properties of interpolymers vary significantly with copolymer styrene content. Interpolymers with up to about 45 wt.% copolymer styrene are semi-crystalline and exhibit good low temperature toughness. Interpolymers with greater than about 45 wt.% copolymer styrene are... 

Acrylonitrile-butadiene-styrene (ABS) copolymers Ethylene-methacrylic acid copolymers Styrene-butadiene rubber copolymers (SBR)... 

How might you prepare a block copolymer of styrene and an alternation copolymer of ethylene and propylene ... 

---