Butadiene acrylonitrile/polyvinyl

Modulus at 200% elongation 950 psi Butadiene acrylonitrile/polyvinyl chloride blend... 

Nevertheless, it would seem reasonable that, in the absence of any liquid plasticizer medium at all, mobility of ionic impurities would be reduced to such a low level that volume resistivity would remain high. For example, it is well known that polyvinyl chloride can be blended with nitrile rubber, such as Goodrich Hycar 1032 butadiene/acrylonitrile copolymer, and such polyblends are quite soft and flexible without the use of any liquid plasticizer at all (Table VII). 

Indeed most polymers are receptive to attack including cellulose nitrate, cellulose acetate, polycaprolactone, polyethylene succinate, polyethylene adipate, polyvinyl alcohol, polybutadiene, styrene butadiene, butyl acrylonitrile, butadiene acrylonitrile, polyester polyurethanes, polyacetate, polyglycollate, polydioxanone and Nylon 2,6. 

Similar results are obtained in the radiation-induced graft copolymerization of butadiene-acrylonitrile and styrene-acrylonitrile onto polyvinyl alcohol fibers (22). 

Polymeric materials such as nylon, polyethylene, neoprene, mbber, acrylonitrile-butadiene copolymer, polyvinyl chloride-acetate, and polyurethane foam burn or react violently with fluorine (Schmidt and Harper 1967). 

The objects of our investigations were four kinds of elastomers, of different structure and polarity, viz. cis-1,4-polybutadiene (BR)> butadiene-acrylonitrile copolymer (NBR), isobutylene-isoprene copolymers (IIR) and ethylene-propylene-diene terpolymer (EPT). They were mixed with plastomers low density polyethylene (PE] ), polystyrene (PS), polytetrafluoroethylene (PTFE), polyvinyl chloride (PVC), polycaproamide (PCA) and polyacrylonitrile (PAN) (Table 1). The concentration of the plastomers in the mixtures was changed in the range from 0 to 50 pph of the elastomer. The polymers were blended at temperature T = 423 K by means of the micromill of the Plasti--Corder apparatus. After 24 hours, crosslinking substances, dicurayl peroxide (DCP) or sulphur and diphenylguanidine (S, DPG), were added at room temperature. The composition of the mixtures is given in Table 2. 

Heucorox Yellow 145 MF, Heucorox Yellow 150 MF. See Iron oxide yellow monohydrate Heveagrip. See Resorcinol-formaldehyde resin Heveasyn PVC Latex. See Polyvinyl chloride Heveatex Acrylic. See Acrylic resin Heveatex Nitrile. See Butadiene/acrylonitrile copolymer... 

Butadiene/acrylonitrile copolymer adhesive, food-packaging food containers D-Mannitol adhesive, furniture Urea-formaldehyde resin adhesive, glass Epoxy resin Polyvinyl acetate adhesive, glass fibers Styrene/PVP copolymer adhesive, grinding disks Animal glue adhesive, hair care Polyquaternlum-14 adhesive, heat-resistance Silicone elastomer... 

Butadiene/acrylonitrile copolymer film, gasoline-resistant Polyvinyl alcohol... 

Hot-gas welding can be used to join most thermoplastics including polypropylene, polyethylene, acrylonitrile butadiene styrene, polyvinyl chloride, thermoplastic polyurethane, high-density polyethylene, polyamide, polycarbonate, and polymethylmethacrylate. For polyolefins and other plastics that are easily oxidized, the heated gas must be inert (e.g., nitrogen or argon) because hot air will oxidize the surface of the plastic. 

One of the basic monomers is gaseous ethylene, which is polymerized to form polyethylene, which is the basis for other monomers such as styrene, acrylonitrile, isobutylene, vinyl alcohol, and vinyl chloride. These monomers in turn can be polymerized to form polystyrene, polyacrylonitrile, polyisobutylene, polyvinyl alcohol, and polyvinyl chloride. Another basic monomer is butadiene from which the monomers isoprene and chloroprene are derived. These two groups of monomers can react to form copolymers such as butadiene-styrene (GR-S), butadiene-acrylonitrile (Buna-N), and isoprene with isobutylene (butyl), which forms the basis of a basic elastomer series. 

Cox and co-workers [133] analysed PS/polyvinyl methyl ether blends by coincidence counting ToF mass spectrometry. This technique gave information on the chemical and spatial relationships between secondary ions. Thompson [134] carried out a quantitative surface analysis of organic polymer blends (e.g., miscible polycarbonate (PC)/PS blends) using ToF-SIMS. Lin and co-workers [135] used supersonic beam/multiphoton ionisation/ToF mass spectrometry to analyse photoablation products resulting from styrene-containing polymers such as styrene-butadiene, acrylonitrile-butadiene-styrene (ABS), and PS foams. Photoablation products were examined by supersonic beam spectrometry and the results were compared with those obtained by thermal decomposition. 

The important thermoplastics used commercially are polyethylene, acrylonitrile butadiene styrene (ABS), polyvinyl chloride (PVC), cellulose acetate butyrate (CAB), vinylidene chloride (Saran), fluorocarbons (Teflon, Halar, Kel-F, Kynar), polycarbonates, polypropylene, nylons, and acetals (Delrin). Important thermosetting plasttcs are... 

This comprehensive article supplies details of a new catalytic process for the degradation of municipal waste plastics in a glass reactor. The degradation of plastics was carried out at atmospheric pressure and 410 degrees C in batch and continuous feed operation. The waste plastics and simulated mixed plastics are composed of polyethylene, polypropylene, polystyrene, polyvinyl chloride, acrylonitrile butadiene styrene, and polyethylene terephthalate. In the study, the degradation rate and yield of fuel oil recovery promoted by the use of silica alumina catalysts are compared with the non-catalytic thermal degradation. 9 refs. lAPAN... 

In order to determine the sources of contamination, some water samples, including wastewaters and effluents from different industries were also sampled. Along the Cinca River and in the industrial area of Monzon, industrial effluents from two different industries were selected the first one produced EPS (Expandable polystyrene) treated with flame retardants and ABS (Acrylonitrile-butadiene-styrene), and the second one produced PVC (Polyvinyl chloride). As regards the Vero River, three industries were sampled the first one, a textile industry which produced polyester fibers treated with flame retardants, the second one produced epoxy... 

Abbreviations HCL Hydrochloric Acid ABS Acrylonitrile Butadiene Styrene PVC Polyvinyl Chloride VAM Vinyl Acetate Monomer... 

In the cavernous halls of the Shanghai Industrial Exhibition, one can see a cornucopia of consumer goods (clothes of polyester, polyacrylic, and polyvinyl alcohol fiber shoes and sandals of polyvinyl chloride suitcases and television set frames of acrylonitrile-butadiene-styrene plastic toys and containers of polyethylene, and many other plastic products (China produced approximately 800,000 tons of plastics in 1980) of convenience we take for granted in the West) that the Chinese government will try to deliver, in quantity, to its citizens in the years to come. 

ISO 580 1990 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings -Oven test - Test method and basic specifications ISO 727-1 2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1 Metric series ISO 727-2 2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2 Inch-based series ISO 1163-1 1995 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1 Designation system and basis for specifications ISO 1163-2 1995 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2 Preparation of test specimens and determination of properties ISO 1265 1979 Plastics - Polyvinyl chloride resins - Determination of number of impurities and foreign particles... 

Abbreviations for plastics ABS, acrylonitrile-butadiene-styrene CPVC, chlorinated poly vinyl chloride ECTFE, ethylene-chlorotrifluoroethylene ETFE, ethylene-tetrafluoroethylene PB, polybutylene PE, polyethylene PEEK, poly ether ether ketone PFA, perfluoroalkoxy copolymer POP, poly phenylene oxide PP, polypropylene PVC, polyvinyl chloride PVDC, poly vinylidene chloride PVDF, poly vinylidene fluoride. 

Other compatible commercial systems are as follows polystyrene (PS) and polyphenylene oxide (PPO) polyvinyl chloride (PVC) and nylon 66 PVC and acrylonitrile-butadiene rubber (NBR) and PS and polycarbonate (PC) (up to 60% PC). 

Several flexible polymers, such as natural rubber (NR) synthetic rubber (SR) polyalkyl acrylates copolymers of acrylonitrile, butadiene, and styrene, (ABS) and polyvinyl alkyl ethers, have been used to improve the impact resistance of PS and PVC. PS and copolymers of ethylene and propylene have been used to increase the ductility of polyphenylene oxide (PPO) and nylon 66, respectively. The mechanical properties of several other engineering plastics have been improved by blending them with thermoplastics. 

Highlighting some of these post-phenolic developments, we saw polyvinyl chloride introduced in 1927, acrylics in 1936, nylon in 1938, and fluorocarbon in 1943. ABS (acrylonitrile-butadiene-styrene) was introduced in 1948, acetal in 1956, polycarbonate in 1957, polyphenylene oxide in 1964, and polysulfone in 1965. 

Studies in the grafting of mixed monomers to cellulose have also been reported by Sakurada (113). Binary mixtures studied included butadiene with styrene or with acrylonitrile, and styrene with acrylonitrile. Remarkable increases in rate in the case of mixed monomer similar to those found by RAPSON were found in many cases. For example, about 10% of butadiene increased the grafting yield about ten fold. Similar results were found with the addition of acrylonitrile to butadiene and to styrene. Ternary mixtures of monomers were also investigated by both Rapson (109) and Sakurada (113). The large increases in rate with certain mixtures were interpreted by Sakurada as due to a particular balance of gd effects akin in many ways to popcorn polymerization. The effects were found also with polyvinyl alcohol but not with polyethylene where gel effects would perhaps be less prominent. 

The principal kinds of thermoplastic resins include (1) acrylonitrile-butadiene-styrene (ABS) resins (2) acetals (3) acrylics (4) cellulosics (5) chlorinated polyelliers (6) fluorocarbons, sucli as polytelra-fluorclliy lene (TFE), polychlorotrifluoroethylene (CTFE), and fluorinated ethylene propylene (FEP) (7) nylons (polyamides) (8) polycarbonates (9) poly elliylenes (including copolymers) (10) polypropylene (including copolymers) ( ll) polystyrenes and (12) vinyls (polyvinyl chloride). The principal kinds of thermosetting resins include (1) alkyds (2) allylics (3) die aminos (melamine and urea) (4) epoxies (5) phenolics (6) polyesters (7) silicones and (8) urethanes,... 

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... 

Emulsion polymerization is used for 10-15% of global polymer production, including such industrially important polymers as poly(acrylonitrile-butadiene-styrene) (ABS), poly (styrene), poly(methyl methacrylate), and polyvinyl acetate.38 These are made from aqueous solutions with high concentrations of suspended solids. The important components have unsaturated carbon-carbon double bonds. These systems are ideal for Raman spectroscopy and a challenge for other approaches, though NIR spectroscopy has been used. 

The formation of coagulum is observed in all types of emulsion polymers (i) synthetic rubber latexes such as butadiene-styrene, acrylonitrile-butadiene, and butadiene-styrene-vinyl pyridine copolymers as well as polybutadiene, polychloroprene, and polyisoprene (ii) coatings latexes such as styrene-butadiene, acrylate ester, vinyl acetate, vinyl chloride, and ethylene copolymers (iii) plastisol resins such as polyvinyl chloride (iv) specialty latexes such as polyethylene, polytetrafluoroethylene, and other fluorinated polymers (v) inverse latexes of polyacrylamide and other water-soluble polymers prepared by inverse emulsion polymerization. There are no major latex classes produced by emulsion polymerization that are completely free of coagulum formation during or after polymerization. 

Figure 7.5 Classification result of shredded mixed electronics waste, superimposed onto a greyscale image of the waste fraction. Only objects that could be identified with a likelihood >95% have been classified. Classification colour code yellow metal, mostly aluminium red polymethyl metacry-late (PMMA) orange polyolefines (PE, PP) pink styrene polymers (PS, PS-E, etc.) violet polyamides (PA 6, PA 6.6, etc.) green acrylonitrile-butadiene-styrene (ABS) blue polyvinyl chloride (PVC).

The most common advanced composites are made of thermosetting resins, such as epoxy polymers (the most popular singlematrix material), polyesters, vinyl esters, polyurethanes, polyimids, cianamids, bismaleimides, silicones, and melamine. Some of the most widely used thermoplastic polymers are polyvinyl chloride (PVC), PPE (poly[phenylene ether]), polypropylene, PEEK (poly [etheretherketone]), and ABS (acrylonitrile-butadiene-styrene). The precise matrix selected for any given product depends primarily on the physical properties desired for that product. Each type of resin has its own characteristic thermal properties (such as melting point... 

Fig. 1. US total sales and captive use of selected thermoplastic resins by major market for 2001. Major market volumes are derived from plastic resins sales and captive use data as compiled by VERIS Consulting, LLC and reported by the American Plastics Council s Plastic Industry Producers Statistics Group. Selected thermoplastics are low-density polyethylene, linear low-density polyethylene, high-density polyethylene, polypropylene, nylon, polyvinyl chloride, thermoplastic polyester, engineering resins, acrylonitrile-butadiene-styrene, styrene-acrylonitrile, other styrenics, polystyrene, and styrene butadiene latexes. (Data from ref. 25.)...

Thermoplastic polymers, notably acrylonitrile-butadiene-styrene and polyvinyl chloride Applications include ... 

---