Glass epoxy resin

Light weight reinforced syntactic plastics are a new application of microspheres, an example being made from an epoxy resin, glass fiber, and carbon or glass microspheres. These materials have also good heat insulation and ablation properties40). [Pg.92]

Properties of Cured Hydantoin Epoxy Resins Glass Temperatures... [Pg.118]

Yellow Phenol Epoxy resins (glass fiber reinforced)... [Pg.39]

Phenolic resin - glass fiber IC Epoxy resin - glass fiber 5 x 10 ... [Pg.844]

At very low applied strains (<0.15%), for a particular epoxy resin/glass system. Type B failure of the unexposed part of the cross-ply laminate... [Pg.105]

Chlorinated polyether Polysulphone Polytetrafluoroethylene Epoxy resin, amine-cured Epoxy resin, anhydride-cured The same filled with 65% of quartz flour The same filled with 65% of Al(OH)8 Epoxy resin, glass-laminated Epoxy resin, cycloaliphatic Expanded polystyrene Expanded polystyrene, flame-retardant Expanded polystyrene, extruded profile The same with flame-retardant Rigid polyurethane foam The same with flame-retardant Polysiocyanurate foam Flexible polyurethane foam Paraffin (candle)... [Pg.132]

Epoxy resins Glass fibre and mineral Very good Very good Very poor Very good Very good Very good Very poor Ver) poor... [Pg.130]

Hameed, N., Sreekumar, P.A., Francis, B., Yang, W., Thomas, S. Morphology, dynamic mechanical and thermal studies on poly(styrene-co-actylonitrile) modified epoxy resin/glass fibre composites. Compos. A Appl. ScL Manuf. 38, 2422-2432 (2007)... [Pg.11]

Epoxy resins (glass fibre) Encapsulated electronic and electrical devices, capacitor and resistor protection and switchgear insulation... [Pg.92]

Epoxy resins, glass filled 200 200 Very poor... [Pg.102]

Epoxy resins Glass fillers Enc )sulation of electronic and electrical device editors, resistor protection, switch gear insulation... [Pg.129]

Epoxy resins Glass filled — Power transmission equipment... [Pg.175]

Epoxy resins Glass prepag — Building products, pressure vessels... [Pg.175]

Let us now consider some experimental data on the influence of the interphase on the viscoelastic properties. One of the most convenient ways to study the problem is to use some model composites, consisting of the reinforcement covered by polymer, modelhng the interphase layer, and polymer matrix. The system epoxy resin-glass beads covered with poly(butyl methacrylate) was... [Pg.223]

Figure 5.7. Temperature dependences of mechanical loss, tan5, in the system epoxy resin-glass beads covered by PBMA. Compositions corresponding to the curves are given in Table 1. Curve numbers (a) Left curves 11, 12, 13, 0 14. Right curves - , -2, -3,o-4 (b) 0-5, -e, -7,(c) -8, 0-9, -lO. [Adapted by permission from Y. S. Lipatov, V. F. Rosovitsky, and V. V. Shifrin, J. Appl. Polym. Sci., 27, 455 (1982)]...

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...