Barium, effect

Barium, effectiveness as cofactor for, see also Enzyme cofactors phospholipase, 204 SNase, 200-204 Bond-breaking processes, 12 potential surfaces for, 13-14, 18-20 in solutions, 22,46-54... 

The reaction mechanism for these products is not clearly understood, but the introduction of organo-metallic compounds (barium or iron salts in colloidal suspension) has been shown to have a beneficiai action on the combustion of diesel fuel in engines and reduce smoke. However, these products cause deposits to form because they are used in relatively large proportions (on the order 0.6 to 0.8 weight %) to be effective. 

An example of the time effects in irreversible adsorption of a surfactant system is shown in Fig. XI-8 for barium dinonylnapthalene sulfonate (an oil additive) adsorbing on Ti02 (anatase). Adsorption was ineversible for aged systems, but much less so for those equilibrating for a short time. The adsorption of aqueous methylene blue (note Section XI-4) on TiOi (anatase) was also irreversible [128]. In these situations it seems necessary to postulate at least a two-stage sequence, such as... 

It was pointed out in Section XIII-4A that if the contact angle between a solid particle and two liquid phases is finite, a stable position for the particle is at the liquid-liquid interface. Coalescence is inhibited because it takes work to displace the particle from the interface. In addition, one can account for the type of emulsion that is formed, 0/W or W/O, simply in terms of the contact angle value. As illustrated in Fig. XIV-7, the bulk of the particle will lie in that liquid that most nearly wets it, and by what seems to be a correct application of the early oriented wedge" principle (see Ref. 48), this liquid should then constitute the outer phase. Furthermore, the action of surfactants should be predictable in terms of their effect on the contact angle. This was, indeed, found to be the case in a study by Schulman and Leja [49] on the stabilization of emulsions by barium sulfate. 

Hache F, Zeboulon A, Gallot G and Gale G M 1995 Cascaded second-order effects in the femtosecond regime in p-barium borate self-compression in a visible femtosecond optical parametric oscillator Opt. Lett. 20 1556-8... 

Hydrolysis of Potassium Ethyl Sulphate. Dissolve about i g. of the crystals in about 4 ml. of cold distilled water, and divide the solution into two portions, a) To one portion, add barium chloride solution. If pure potassium ethyl sulphate were used, no precipitate should now form, as barium ethyl sulphate is soluble in water. Actually however, almost all samples of potassium ethyl sulphate contain traces of potassium hydrogen sulphate formed by slight hydrolysis of the ethyl compound during the evaporation of its solution, and barium chloride almost invariably gives a faint precipitate of barium sulphate. b) To the second portion, add 2-3 drops of concentrated hydrochloric acid, and boil the mixture gently for about one minute. Cool, add distilled water if necessary until the solution has its former volume, and then add barium chloride as before. A markedly heavier precipitate of barium sulphate separates. The hydrolysis of the potassium ethyl sulphate is hastened considerably by the presence of the free acid Caustic alkalis have a similar, but not quite so rapid an effect. 

Ultimately, as the stabilization reactions continue, the metallic salts or soaps are depleted and the by-product metal chlorides result. These metal chlorides are potential Lewis acid catalysts and can greatiy accelerate the undesired dehydrochlorination of PVC. Both zinc chloride and cadmium chloride are particularly strong Lewis acids compared to the weakly acidic organotin chlorides and lead chlorides. This significant complication is effectively dealt with in commercial practice by the co-addition of alkaline-earth soaps or salts, such as calcium stearate or barium stearate, ie, by the use of mixed metal stabilizers. 

Stabilization Mechanism. Zinc and cadmium salts react with defect sites on PVC to displace the labHe chloride atoms (32). This reaction ultimately leads to the formation of the respective chloride salts which can be very damaging to the polymer. The role of the calcium and/or barium carboxylate is to react with the newly formed zinc—chlorine or cadmium—chlorine bonds by exchanging ligands (33). In effect, this regenerates the active zinc or cadmium stabilizer and delays the formation of significant concentrations of strong Lewis acids. 

Sa.lts Salting out metal chlorides from aqueous solutions by the common ion effect upon addition of HCl is utilized in many practical apphcations. Typical data for ferrous chloride [13478-10-9] FeCl2, potassium chloride [7447-40-7] KCl, and NaCl are shown in Table 9. The properties of the FeCl2-HCL-H2 0 system are important to the steel-pickling industry (see Metal SURFACE TREATMENTS Steel). Other metal chlorides that are salted out by the addition of hydrogen chloride to aqueous solutions include those of magnesium, strontium, and barium. 

The iodate is a poison potassium iodide, however, is used in foodstuffs. Thus the iodate must be completely removed frequently by a final reduction with carbon. After re-solution in water, further purification is carried out before recrystallization. Iron, barium, carbonate, and hydrogen sulfide are used to effect precipitation of sulfates and heavy metals. 

Alkali moderation of supported precious metal catalysts reduces secondary amine formation and generation of ammonia (18). Ammonia in the reaction medium inhibits Rh, but not Ru precious metal catalyst. More secondary amine results from use of more polar protic solvents, CH OH > C2H5OH > Lithium hydroxide is the most effective alkah promoter (19), reducing secondary amine formation and hydrogenolysis. The general order of catalyst procUvity toward secondary amine formation is Pt > Pd Ru > Rh (20). Rhodium s catalyst support contribution to secondary amine formation decreases ia the order carbon > alumina > barium carbonate > barium sulfate > calcium carbonate. 

In other applications of CT, orally administered barium sulfate or a water-soluble iodinated CM is used to opacify the GI tract. Xenon, atomic number 54, exhibits similar x-ray absorption properties to those of iodine. It rapidly diffuses across the blood brain barrier after inhalation to saturate different tissues of brain as a function of its lipid solubility. In preliminary investigations (99), xenon gas inhalation prior to brain CT has provided useful information for evaluations of local cerebral blood flow and cerebral tissue abnormalities. Xenon exhibits an anesthetic effect at high concentrations but otherwise is free of physiological effects because of its nonreactive nature. 

Quantitatively, sulfur in a free or combined state is generally determined by oxidizing it to a soluble sulfate, by fusion with an alkaH carbonate if necessary, and precipitating it as insoluble barium sulfate. Oxidation can be effected with such agents as concentrated or fuming nitric acid, bromine, sodium peroxide, potassium nitrate, or potassium chlorate. Free sulfur is normally determined by solution in carbon disulfide, the latter being distilled from the extract. This method is not useful if the sample contains polymeric sulfur. 

Administration of 5 ppm barium, the acetate, to mice in the drinking water in a life-time study had no observable effects on longevity, mortality, and body weights, or on the incidence of tumors (53). Long-term studies in rats exposed to Ba " in drinking water containing 5 mg/L, as acetate, or 10—250 mg/L, as chloride, resulted in no measurable toxic effects (47). 

Water-insoluble barium salts are poorly absorbed. In fact, barium sulfate is used as a contrast material for x-ray examination of the gastrointestinal tract based on its limited solubility andlow toxicity (52). Barium sulfate fed to mice at various levels up to 8 ppm dietary Ba ( 1.14 mg/kg-d as Ba " ) for three generations had no significant effects on growth, mortality, morbidity, or reproductive performance (53). 

BeryUium reacts with fused alkaU haUdes releasing the alkaU metal until an equUibrium is estabUshed. It does not react with fused haUdes of the alkaline-earth metals to release the alkaline-earth metal. Water-insoluble fluoroberyUates, however, are formed in a fused-salt system whenever barium or calcium fluoride is present. BeryUium reduces haUdes of aluminum and heavier elements. Alkaline-earth metals can be used effectively to reduce beryUium from its haUdes, but the use of alkaline-earths other than magnesium [7439-95-4] is economically unattractive because of the formation of water-insoluble fluoroberyUates. Formation of these fluorides precludes efficient recovery of the unreduced beryUium from the reaction products in subsequent processing operations. 

Fig. 1. Effect of compositional variations on the dielectric properties of strontium titanate-barium titanate solid solutions. A, BaQ SrQ QTiO B,...

Cesium was first produced ia the metallic state by electrolysis of a molten mixture of cesium and barium cyanides (2). Subsequentiy the more common thermochemical—reduction techniques were developed (3,4). There were essentially no iadustrial uses for cesium until 1926, when it was used for a few years as a getter and as an effective agent ia reduciag the electron work function on coated tungsten filaments ia radio tubes. Development of photoelectric cells a few years later resulted ia a small but steady consumption of cesium and other appHcations for cesium ia photosensing elements followed. 

Composite Resins. Many composite restorative resins have incorporated fluoride into the filler particles. One commonly used material, yttrium trifluoride [13709-49-4] is incorporated as a radiopaque filler to aid in radiographic diagnosis, and is also responsible for slow release of fluoride from the composites (280). This same effect is achieved with a barium—alumina—fluoro-siUcate glass filler in composite filling and lining materials. Sodium fluoride [7681-49-4] has also been used in composites by incorporating it into the resin matrix material where it provides long-term low level release (281-283). 

Graded Adsorbents and Solvents. Materials used in columns for adsorption chromatography are grouped in Table 12 in an approximate order of effectiveness. Other adsorbents sometimes used include barium carbonate, calcium sulfate, calcium phosphate, charcoal (usually mixed with Kieselguhr or other form of diatomaceous earth, for example, the filter aid Celite) and cellulose. The alumina can be prepared in several grades of activity (see below). 

For electrical insulation china clay is commonly employed whilst various calcium carbonates (whiting, ground limestone, precipitated calcium carbonate, and coated calcium carbonate) are used for general purpose work. Also occasionally employed are talc, light magnesium carbonate, barytes (barium sulphate) and the silicas and silicates. For flooring applications asbestos has been an important filler. The effect of fillers on some properties of plasticised PVC are shown in Figure 12.21 (a-d). 

---