Amyl acetic ether

Synonyms Acetic acid, amyl ester Acetic acid, pentyl ester AI3-02729 rt-Amyl acetate Amyl acetate Amyl acetic ester Amyl acetic ether /r-Amyl ethanoate Banana oil Birnenoel BRN 1744753 Caswell No. 049A Chlordantoin EPA pesticide chemical code 000169 Holiday pet repellant Holiday repellant dust NSC 7923 Pear oil Pentacetate Pentacetate 28 1-Pentanol acetate 1-Pentyl acetate /3-Pentyl acetate Pentyl acetic ester /3-Pentyl ethanoate Primary amyl acetate UN 1104. 

Amresco acryl-40, see Acrylamide AMS, see a-Methylstyrene n-Amyl acetate, see Amyl acetate Amyl acetic ester, see Amyl acetate Amyl acetic ether, see Amyl acetate Amylene, see 1-Pentene a-n-Amylene, see 1-Pentene p-n-Amylene, see cis-2-Pentene cis-p-Amylene, see cis-2-Pentene frans-p-Amylene, see trans-2-Venlene sec-Amyl ethanoate, see Amyl acetate Amyl ethyl ketone, see 5-Methyl-3-heptanone Amyl hydride, see Pentane Amyl methyl ketone, see 2-Heptanone n-Amyl methyl ketone, see 2-Heptanone AN, see Acrylonitrile Anaesthetic ether, see Ethyl ether Anamenth, see Trichloroethylene Anduron, see Diuron Anesthenyl, see Methylal Anesthesia ether, see Ethyl ether Anesthetic ether, see Ethyl ether Anhydrous ammonia, see Ammonia Aniline oil, see Aniline Anilinobenzene, see 4-Aminobiphenyl Anilinomethane, see Methylaniline 2-Anidine, see o-Anisidine 4-Anisidine, see p-Anisidine 2-Anisylamine, see o-Anisidine... 

Synonyms Amyl acetic ether pentyl acetate... 

B) Examination of the Solvents insoluble in Water. These may be carbon disulphide, chloroform, carbon tetrachloride, a chloro-derivative of ethane or ethylene, a chlorohydrin, amyl alcohol, amyl acetate, ether, benzene or a homologue, oil of turpentine, pinewood oil, light mineral oil, resin oil, tar oil, shale oil, or camphor oil. 

Many of these solvents, e.g., carbon disulphide, amyl alcohol, amyl acetate, ether, benzene, etc., may be easily identified—especially if unmixed with other solvents—by their odour, density, b.pt. and various reactions (see chapter on Chemical Products, Vol. I, and Tables XXXV and XXXVI, opposite.)... 

AMYL ACETIC ETHER (628-63-7) Forms explosive mixture with air (flash point 60°F/16°C). High heat may lead to instability. Reacts with strong oxidizers. Incompatible with strong acids, nitrates, strong alkalis. Attacks some plastics, coatings, and rubber. 

Crystals, dee ]30-135°. [a] —72. uv max (methanol) 230 nm (E( 590). Sol in methanol, ethanol, isopropano], butanol, acetone, methyl ethyl ketone, ethyl acetate, amyl acetate, ether, dioxane, dimethylformamide, benzene, acetic acid slightly sol in water, hexane. 

SYNONYMS amyl acetic ester, amyl acetic ether, 1-pentanol acetate, pentyl ester of acetic acid, primary amyl acetate. 

Synonyms/Trade Names Amyl acetic ester. Amyl acetic ether, 1-Pentanol acetate. Pentyl ester of acetic acid. Primary amyl acetate ... 

Banana Oil Amyl Acetic Ether Isoamyl Acetate... 

Synonyms Acetic acid amyl ester Acetic acid pentyl ester n-Amyl acetate Amylacetic ester Amyl acetic ether... 

Cellulosics. CeUulosic adhesives are obtained by modification of cellulose [9004-34-6] (qv) which comes from cotton linters and wood pulp. Cellulose can be nitrated to provide cellulose nitrate [9004-70-0] which is soluble in organic solvents. When cellulose nitrate is dissolved in amyl acetate [628-63-7] for example, a general purpose solvent-based adhesive which is both waterproof and flexible is formed. Cellulose esterification leads to materials such as cellulose acetate [9004-35-7], which has been used as a pressure-sensitive adhesive tape backing. Cellulose can also be ethoxylated, providing hydroxyethylceUulose which is useful as a thickening agent for poly(vinyl acetate) emulsion adhesives. Etherification leads to materials such as methylceUulose [9004-67-5] which are soluble in water and can be modified with glyceral [56-81-5] to produce adhesives used as wallpaper paste (see Cellulose esters Cellulose ethers). 

Riboflavin forms fine yellow to orange-yeUow needles with a bitter taste from 2 N acetic acid, alcohol, water, or pyridine. It melts with decomposition at 278—279°C (darkens at ca 240°C). The solubihty of riboflavin in water is 10—13 mg/100 mL at 25—27.5°C, and in absolute ethanol 4.5 mg/100 mL at 27.5°C it is slightly soluble in amyl alcohol, cyclohexanol, benzyl alcohol, amyl acetate, and phenol, but insoluble in ether, chloroform, acetone, and benzene. It is very soluble in dilute alkah, but these solutions are unstable. Various polymorphic crystalline forms of riboflavin exhibit variations in physical properties. In aqueous nicotinamide solution at pH 5, solubihty increases from 0.1 to 2.5% as the nicotinamide concentration increases from 5 to 50% (9). 

SO as to end the air mixture to adsorber No. 2. The system is then fully automatic. Solvents which have been successfully recovered by the activated carbon adsorption method include methanol, ethanol, butanol, chlorinated hydrocarbons including perchlorethylene, which boils at 121 C (250 °F), ethyl ether, isopropyl ether, the acetates up to amyl acetate, benzene, toluene, xylene, mineral spirits, naphtha, gasoline, acetone, methyl ethyl ketone, hexane, carbon disulfide, and others. 

Oxygen-containing solvents with a strong coordinating ability, such as diethyl ether, methyl /.so-butyl ketone and /.so-amyl acetate, form oxonium cations with protons under strongly acidic conditions, e.g. (R20) H. Metals which form anionic complexes in strong acid can be extracted as ion pairs into such solvents. For example, Fe(III) is extracted from 7 M hydrochloric acid into diethyl ether as the ion pair... 

Materials Required Benzylpenicillin sodium (say) 0.12 g amyl acetate (previously saturated with 1-ethylpiperidinium benzylpencillin at room temperature, cooled in ice and filtered) 5.0 ml phosphoric acid (20% v/v) 0.5 ml anhydrous sodium sulphate (freshly ignited and powdered) 0.5 g dry acetone (previously saturated with 1-ethylpiperidinium benzylpenicillin at room temperature cooled in ice and filtered) 3.0 ml 1-ethylpiperidine amyl acetate solution (prepared from 1-ethyl piperidine, 1. 0 ml, and amyl acetate, 8.0 ml, saturated at room temperature with 1-ethylpiperidinium benzylpenicillin, cooled in ice and filtered) 1.5 ml dry acetone in amyl acetate (1 1) previously saturated with 1-ethylpiperidinium benzylpenicillin 2.0 ml solvent ether 4.0 ml. 

Miscible with alcohol, amyl alcohol, ether, and ethyl acetate (Windholz et al., 1983)... 

Acetamido-4-amino-6-chloro-s-triazine, see Atrazine Acetanilide, see Aniline, Chlorobenzene, Vinclozolin Acetic acid, see Acenaphthene, Acetaldehyde, Acetic anhydride. Acetone, Acetonitrile, Acrolein, Acrylonitrile, Aldicarb. Amyl acetate, sec-Amyl acetate, Bis(2-ethylhexyl) phthalate. Butyl acetate, sec-Butyl acetate, ferf-Butyl acetate, 2-Chlorophenol, Diazinon. 2,4-Dimethylphenol, 2,4-Dinitrophenol, 2,4-Dinitrotoluene, 1,4-Dioxane, 1,2-Diphenylhydrazine, Esfenvalerate. Ethyl acetate, Flucvthrinate. Formic acid, sec-Hexyl acetate. Isopropyl acetate, Isoamyl acetate. Isobutyl acetate, Methanol. Methyl acetate. 2-Methvl-2-butene. Methyl ferf-butvl ether. Methyl cellosolve acetate. 2-Methvlphenol. Methomvl. 4-Nitrophenol, Pentachlorophenol, Phenol. Propyl acetate. 1,1,1-Trichloroethane, Vinyl acetate. Vinyl chloride Acetoacetic acid, see Mevinphos Acetone, see Acrolein. Acrylonitrile. Atrazine. Butane. 

Ester Content (as Ethyl Acetate) — min 85 0 max 88.0%. It shall be detd in accordance with ASTM D1617-69, described in Annual Book of ASTM Standards, Part 20(1972), 736-39 Note 1 The method described in ASTM D1617— 69 applies not only to EtAcet, but also to other esters, such as N-butyl acetate, isopropyl acetate, acetate ester of ethylene glycol monoethyl ether, sec-butyl acetate, amyl acetate, dibutyl phthalate and iso butyl acetate... 

Toxicity. Dichlorohydrin has a narcotic 8c depressant action on the heart, circulation respiration. It is harmful when taken internally or when absorbed thru the skin Uses. According to Daniel (Ref 3), Dichlorohydrin was proposed at the end of the 19th century as a solv for NC used in commercial expls, since it is less volatile than some other solvs (such as ether-ale, acetone, ethyl or amyl acetate). Dichlorohydrin is used in the production of epichlorohydrin, as intermediates in the manuf of glycerol derivs, sulfqr-contg polymers textile finishing agents (Ref 5)... 

Cycloheximide [68-81-9] M 281.4, m 119.5-121°. Crystd from water/MeOH (4 1), amyl acetate, isopropyl acetate/isopropyl ether or water. 

Apard [27] found that the addition of finely powdered plumbous oxide, calcium oxide or calcium hydroxide to a 1% nitrocellulose solution in acetone, ether-alcohol or amyl acetate initially brought about an increase of the viscosity. Further addition of these substances caused the nitrocellulose to coagulate, together with the added... 

The nitration products obtained by Rassow and Dorr were partially soluble in ether-alcohol, and completely soluble in amyl acetate. 

---