Poly adsorption

Keywords Hybrid material Silica Polyelectrolyte adsorption Poly(vinylamine-co-vinylformamide)... 

FTIR photoacoustic spectroscopy was used for the study of the adsorption of poly(n-butyl methacrylate) from cyclohexane, benzene and carbon tetrachloride onto alumina. The efficiency of adsorption increased in the order cyclohexane, carbon tetrachloride, benzene, while methanol and tetrahydrofuran showed negative adsorption. Poly(n-butyl methacrylate) had a negative temperature coefficient of adsorption (126). 

Open-channel PDMS chip Trypsin Adsorption Poly(vinylidene fluoride) porous membrane with the adsorbed trypsin immobilized on channels of PDMS Cyt-C identified with as little as 0.04 pmol. [89]... 

Of particular interest has been the study of the polymer configurations at the solid-liquid interface. Beginning with lattice theories, early models of polymer adsorption captured most of the features of adsorption such as the loop, train, and tail structures and the influence of the surface interaction parameter (see Refs. 57, 58, 62 for reviews of older theories). These lattice models have been expanded on in recent years using modem computational methods [63,64] and have allowed the calculation of equilibrium partitioning between a poly-... 

Cationic monomers are used to enhance adsorption on waste soHds and faciHtate flocculation (31). One of the first used in water treatment processes (10) is obtained by the cyclization of dimethyldiallylammonium chloride in 60—70 wt % aqueous solution (43) (see Water). Another cationic water-soluble polymer, poly(dimethylarnine-fi9-epichlorohydrin) (11), prepared by the step-growth... 

This principle is illustrated in Figure 10 (45). Water adsorption at low pressures is markedly reduced on a poly(vinyhdene chloride)-based activated carbon after removal of surface oxygenated groups by degassing at 1000°C. Following this treatment, water adsorption is dominated by capillary condensation in mesopores, and the si2e of the adsorption-desorption hysteresis loop increases, because the pore volume previously occupied by water at the lower pressures now remains empty until the water pressure reaches pressures 0.3 to 0.4 times the vapor pressure) at which capillary condensation can occur. 

Fig. 10. Adsorption ( , O)"desorption (A, A) isotherms of water vapor on poly(vinylidene chloride) (PVDC) carbon before (filled symbols) and after...

The white cell adsorption filter layer is typically of a nonwoven fiber design. The biomaterials of the fiber media are surface modified to obtain an optimal avidity and selectivity for the different blood cells. Materials used include polyesters, eg, poly(ethylene terephthalate) and poly(butylene terephthalate), cellulose acetate, methacrylate, polyamides, and polyacrylonitrile. Filter materials are not cell specific and do not provide for specific filtration of lymphocytes out of the blood product rather than all leukocytes. 

Sacrificial adsorption agents such as lignosulfonates (148—151) can be used to reduce the adsorption of more expensive polymers and surfactants. Other chemicals tested include poly(vinyl alcohol) (152), sulfonated poly(vinyl alcohol) (153), sulfonatedpoly(vinylpyrrohdinone) (153), low molecular weight polyacrylates (154), and sodium carbonate (155). 

Biomaterials with Low Thrombogenicity. Poly(ethylene oxide) exhibits extraordinary inertness toward most proteins and biological macromolecules. The polymer is therefore used in bulk and surface modification of biomaterials to develop antithrombogenic surfaces for blood contacting materials. Such modified surfaces result in reduced concentrations of ceU adhesion and protein adsorption when compared to the nonmodifted surfaces. 

SG sols were synthesized by hydrolysis of tetraethyloxysilane in the presence of polyelectrolyte and surfactant. Poly (vinylsulfonic acid) (PVSA) or poly (styrenesulfonic acid) (PSSA) were used as cation exchangers, Tween-20 or Triton X-100 were used as non- ionic surfactants. Obtained sol was dropped onto the surface of glass slide and dried over night. Template extraction from the composite film was performed in water- ethanol medium. The ion-exchange properties of the films were studied spectrophotometrically using adsorption of cationic dye Rhodamine 6G or Fe(Phen) and potentiometrically by sorption of protons. 

The study of acid-base interaction is an important branch of interfacial science. These interactions are widely exploited in several practical applications such as adhesion and adsorption processes. Most of the current studies in this area are based on calorimetric studies or wetting measurements or peel test measurements. While these studies have been instrumental in the understanding of these interfacial interactions, to a certain extent the interpretation of the results of these studies has been largely empirical. The recent advances in the theory and experiments of contact mechanics could be potentially employed to better understand and measure the molecular level acid-base interactions. One of the following two experimental procedures could be utilized (1) Polymers with different levels of acidic and basic chemical constitution can be coated on to elastomeric caps, as described in Section 4.2.1, and the adhesion between these layers can be measured using the JKR technique and Eqs. 11 or 30 as appropriate. For example, poly(p-amino styrene) and poly(p-hydroxy carbonyl styrene) can be coated on to PDMS-ox, and be used as acidic and basic surfaces, respectively, to study the acid-base interactions. (2) Another approach is to graft acidic or basic macromers onto a weakly crosslinked polyisoprene or polybutadiene elastomeric networks, and use these elastomeric networks in the JKR studies as described in Section 4.2.1. 

Z. Tang, L. E. Scriven, H. T. Davis. Size selectivity in adsorptions of poly-disperse hard-rod fluids in micropores. J Chem Phys 97 5732-5737, 1992. 

It is well known that anionic samples tend to adsorb on poly(styrene-divinylbenzene) resins. However, cationic samples tend to be repelled from the resins. The mechanism seems to be an ionic interaction, although the poly(styrene-divinylbenzene) resin should be neutral. The reason is not well clarified. Therefore, it is recommended to add some salt in the elution solvent when adsorption or repulsion is observed in the analyses of polar samples. For example, polysulfone can be analyzed successfully using dimethylformamide containing 10 mM lithium bromide as an elution solvent, as shown in Fig. 4.42. 

It has been outlined by several authors that the single macromolecule may be irreversibly bound because of the large number of weakly interacting segments. The first papers on the construction of polymer-coated silica adsorbents involved the physical adsorption of water-soluble polymers. Polyethylene oxides [28, 29] and poly-/V-vinylpyrrolidone [30] are examples of the stationary phases of this type. 

The drawback of the described adsorbents is the leakage of the bonded phase that may occur after the change of eluent or temperature of operation when the equilibrium of the polymer adsorption is disturbed. In order to prepare a more stable support Dulout et al. [31] introduced the treatment of porous silica with PEO, poly-lV-vinylpyrrolidone or polyvinylalcohol solution followed by a second treatment with an aqueous solution of a protein whose molecular weight was lower than that of the proteins to be separated. Possibly, displacement of the weakly adsorbed coils by the stronger interacting proteins produce an additional shrouding of the polymer-coated supports. After the weakly adsorbed portion was replaced, the stability of the mixed adsorption layer was higher. 

The chemical adsorption of a relatively high molecular weight neutral polymer (poly(succinimide), M = 13000) on aminopropyl-Vydac 101 TP silica gel was applied by Alpert [47, 48] to prepare a reactive composite support for use in cation-exchange [47] and hydrophobic-interaction [48] chromatography of pro-... 

The most possible reason may be in the higher free energy of the protein adsorption on PolyPROPYL A materials. Chemisorbed neutral poly(succinimide) of molecular weight 13000 apparently forms a diffuse interface as predicted by theory (see Sect. 2.2). Controversially, a short polyethyleneimine exists on a surface in a more flat conformation exhibiting almost no excluded volume and producing... 

Fig. 7a, b. Kinetics of poly(p-nitrophenyl acrylate) chemical adsorption on aminopropyl-Aerosil at 25 °C in dimethylsulphoxide. Filled circles ester group content (pmol/g support), empty c/rc/ei p-nitrophenol release (pmol/g support), a — l%solution b — 5% solution [55]... 

Some authors have suggested the use of fluorene polymers for this kind of chromatography. Fluorinated polymers have attracted attention due to their unique adsorption properties. Polytetrafluoroethylene (PTFE) is antiadhesive, thus adsorption of hydrophobic as well as hydrophilic molecules is low. Such adsorbents possess extremely low adsorption activity and nonspecific sorption towards many compounds [109 111]. Fluorene polymers as sorbents were first suggested by Hjerten [112] in 1978 and were tested by desalting and concentration of tRN A [113]. Recently Williams et al. [114] presented a new fluorocarbon sorbent (Poly F Column, Du Pont, USA) for reversed-phase HPLC of peptides and proteins. The sorbent has 20 pm in diameter particles (pore size 30 nm, specific surface area 5 m2/g) and withstands pressure of eluent up to 135 bar. There is no limitation of pH range, however, low specific area and capacity (1.1 mg tRNA/g) and relatively low limits of working pressure do not allow the use of this sorbent for preparative chromatography. 

Immobilization of A and B blood group oligosaccharide haptens and preparation of immunoadsorbents with specificity to anti-A and anti-B antibodies has been carried out with the use of poly acrylate-coated PG (WPG-PA) [124]. Prespacered A and B-trisaccharide-fl-aminopropylglycosides were used for the synthesis. WPG-PA (1 g) quantitatively binds both haptens (2 pinole) whereas some other activated affinity supports (for example, CNBr-Sepharose 4B) do not. On the other hand, glycidoxypropyl-silica binds prespacered haptens completely but these materials reveal no specific adsorptivity. 

We discussed more quantitatively the correlation of the adsorption with catalytic activity in the heterogeneous systems using poly(4-vinylpyridine-co-divinylbenzene) quaternized with alkylhalide [e. g. 88 (RC16PVP)] as a catalyst and p-nitrophenyl-valerate (PNPV) as a substrate147. ... 

These poly(2-alkyl-2-oxazoline) silane coupling agents were copolycondensed with tetraethoxysilane by acid-catalyst to produce poly(2-alkyl-2-oxazoline)-modified silica gel. The composite gel from 2-ethyl-2-oxazoline was also homogeneous and transparent glass. Poly(2-alkyl-2-oxazoline)-modified silica gels, especially gels based on poly(2-ethyl-2-oxazoline) absorbed water and also organic solvents such as DMF or alcohols as shown in Table 7. This result means that the obtained composite gel shows the amphiphilic adsorption property. 

Fig. 3 a-c. Summary of data from different laboratories, obtained by surface force measurement, on the average layer thickness L as a function of tethered chain length for flat, tethered layers constructed by adsorption of amphiphilic polymers on mica. Adapted from Ref. 21. (a) Data of reference 20 on poly-tert-butylstyrene chains anchored by adsorbing blocks of poly-2-vinylpyridine. (b) Data of references 11 and 12 on polystyrene chains anchored by adsorbing blocks of poly-2-vinylpyridine. (c) Data of references 13 and 14 on polystyrene chains anchored by adsorbing zwitterionic groups [13] or by small adsorbing blocks of polyethyleneoxide [14]... 

Figure 7 shows the results of measurements of adsorption density by Parsonage, etal. [77] on a series of eighteen block copolymers, with poly(2-vinylpyridine) [PVP] anchors and polystyrene [PS] buoys, adsorbed from toluene (selective for PS) of variable molecular weight in each block. The results are presented as the reciprocal square of Eq. 28, that is, as a dimensionless number density of chains ct (d/Rg A)-2. For all but the copolymers of highest asymmetry, Eq. 28 is in good agreement with the data of Fig. 7. The high asymmetry copolymers are in the regime of the data of curves (a) and (c) of Fig. 3 where the large relative size...

Fig. 7. Data of Parsonage et al. [77] on the adsorption of a series of block copolymers of polystyrene-poly-2-vinylpyridine. The ordinate is the measured surface density ( d 2) reduced by the density required for the nonadsorbing chains to overlap the abscissa is the solvent-enhanced size asymmetry of the block copolymer defined under Eq. 26. The form of this plot is that suggested by Eq. 28...

VandeVondele S, Voros J, Hubbell JA (2003) Rgd-grafted poly-l-lysine-graft- (polyethylene glycol) copolymers block non-specific protein adsorption while promoting cell adhesion. Biotechnol Bioeng 82 784—790... 

The process of adsorption of polyelectrolytes on solid surfaces has been intensively studied because of its importance in technology, including steric stabilization of colloid particles [3,4]. This process has attracted increasing attention because of the recently developed, sophisticated use of polyelectrolyte adsorption alternate layer-by-layer adsorption [7] and stabilization of surfactant monolayers at the air-water interface [26], Surface forces measurement has been performed to study the adsorption process of a negatively charged polymer, poly(styrene sulfonate) (PSS), on a cationic monolayer of fluorocarbon ammonium amphiphilic 1 (Fig. 7) [27],... 

---