Chemical Test Methods

CFFA Standard Test Methods, Chemical Films Fabrics Association, Inc. (CFFA), Cleveland, Ohio, 1984. 

Liquid Propellant Test Methods, Chemical Propulsion Information... 

Three Engelhard FOC catalysts, identified as catalysts A, B, and C representing typical gasoline, partial octane and octane catalysts were prepared for comparing various test methods. Chemical and physical properties are presented in Table 1. 

Properties ASTM Test Method Chemically Lubricated Homo- polymer uv Stabilized Homo- polymer UV Stabilized 20% Glass-Filled Homo-polymer Extrusion Grade Homo- polymer 30% Carbon Fiber 10% PAN Carbon Fiber, 10% PTFE-lilled Copolymer Cast... 

NACE Standard tmO169-96, Standard Test Method, Chemical Resistance of Polymeric Materials by Periodic Evaluation, NACE International, Houston, TX, 1996. 

Qualitative tests and chemical degiadation have been to a large degree replaced by mstiumental methods of stiuctuie deteimmation The most prominent methods and the stiuctuial clues they provide are... 

Standard test methods for chemical analysis have been developed and pubUshed (74). Included is the determination of commonly found chemicals associated with acrylonitrile and physical properties of acrylonitrile that are critical to the quaUty of the product (75—77). These include determination of color and chemical analyses for HCN, quiaone inhibitor, and water. Specifications appear in Table 10. 

The pubHcations detailing standards (5—8) generally include both specifications and methods of analysis for the substances. The estabHshment of standards of quaHty for chemicals of any kind presupposes the abiHty to set numerical limits on physical properties, allowable impurities, and strength, and to provide the test methods by which conformity to the requirements may be demonstrated. Tests are considered appHcable only to the specific requirements for which they were written. Modification of a requirement, especially if the change is toward a higher level of purity, often necessitates revision of the test to ensure the test s vaHdity. 

One of the greatest tasks in providing compendial standards is to obtain, adapt, or develop test methods for determining compliance with the standards. Such methods must be capable of routine use in many laboratories by different personnel and equipment. There is a vast difference between a method that can be used in one laboratory by speciaHsts and one that can be used in many laboratories by generaHsts to determine whether chemicals pass or fail the estabHshed specifications. Additionally, the deterrninations must be reHable, because the results obtained may determine whether a product is safe or legal. 

The AGS Book. The ACS book, Feagent Chemicals—zA.CS Specifications, estabhshes a standard of quahty for reagents to be used in precise analytical work, for which purpose it contains both specifications and testing methods for some 350 reagent chemicals. 

Standard Test Methods For Chemical Analysis of Magnesium and Magnesium Alloys, ASTM E-35 to 88, American Society for Testing and Materials, Philadelphia, Pa., 1992. 

Analytical and Test Methods. Many of the procedures for technical analyses of magnesium hydroxide are readily available from the principal producers. These procedures should be carefully reviewed. Site-specific variations in procedure steps and mechanics, especially for chemical activity, can bias results and inadvertantiy disqualify an otherwise acceptable product. 

Analytical standards imply the existence of a reference material and a recommended test method. Analytical standards other than for fine chemicals and for the NIST series of SRMs have been reviewed (6). Another sphere of activity ia analytical standards is the geochemical reference standards maintained by the U.S. Geological Survey and by analogous groups ia France, Canada, Japan, South Africa, and Germany (7). 

American Leather Chemists Association c/o University of Cincinnati Cincinnati, Ohio 45221 Chemical and physical test methods for leather... 

Analytical and test methods for the characterization of polyethylene and PP are also used for PB, PMP, and polymers of other higher a-olefins. The C-nmr method as well as k and Raman spectroscopic methods are all used to study the chemical stmcture and stereoregularity of polyolefin resins. In industry, polyolefin stereoregularity is usually estimated by the solvent—extraction method similar to that used for isotactic PP. Intrinsic viscosity measurements of dilute solutions in decahn and tetraHn at elevated temperatures can provide the basis for the molecular weight estimation of PB and PMP with the Mark-Houwiok equation, [rj] = KM. The constants K and d for several polyolefins are given in Table 8. 

P. A. Cunniff, ed.. Official Methods of Analysis of AO AC International, 16th ed., Vols. I and II, AO AC International, Arlington, Va., 1995. Vol. I includes Pesticide Formulations and Pesticide Residues. Over 2100 coUabotatively tested, approved methods for chemical and microbiological analyses, with 149 new methods, 103 revised/updated methods, methods using anibody-based test kits, enzyme immunoassay, and annual supplements containing new and revised methods chemical and common names of all dmgs and pesticides easy-to-locate references. 

Analytical and Test Methods. Most of the analytical and test methods described for THF and PTHF are appHcable to OX and POX with only minor modifications (346). Infrared and nmr are useful aids in the characterization of oxetanes and their polymers. The oxetane ring shows absorption between 960 and 980 cm , regardless of substituents on the ring (282). Dinitro oxetane (DNOX) has its absorption at 1000 cm . In addition, H-nmr chemical shifts for CH2 groups in OX and POX are typically at 4.0—4.8 5 and 3.5—4.7 5, respectively (6,347,348) C-nmr is especially useful for characterizing the microstmcture of polyoxetanes. 

Degradable plastic is a plastic designed to undergo a significant change in its chemical stmcture under specific environmental conditions, resulting in a loss of some properties that may vary as measured by standard test methods appropriate to the plastic and the appHcation in a particular period of time that determines its classification. 

Alkylamines and diamines are generally classified as corrosive to the skin based on results from laboratory animal (rabbit) studies performed in accordance with the Department of Transportation (DOT) test method (84) rabbits are considered to be especially sensitive to alkylamines which even at low concentrations can induce skin redness and swelling. Oleylamine has been shown to induce mild to moderate skin irritation in laboratory rats when appHed at a concentration of 0.3% in mineral oil (Chemical Manufacturer s Association, 1985). Fatty amines which contain alkyl chains of 10—14 carbons are considered more irritating than related products which contain alkyl chains of 14—18 carbon atoms. Ethoxylation generally decreases the irritation potential of alkylamines. 

Analytical and Test Methods. In addition to the modem spectroscopic methods of detection and identification of pyrroles, there are several chemical tests. The classical Runge test with HCl yields pyrrole red, an amorphous polymer mixture. In addition, all pyrroles with a free a- or P-position or with groups, eg, ester, that can be converted to such pyrroles under acid conditions undergo the Ehrlich reaction with p-(dimethylamino)henzaldehyde to give purple products. 

Test Methods. In addition to that provided by proper sampling and rephcation of analysis, a test method also has a significant impact on the accuracy and precision of the results. Preferred methods are those which are accepted in the chemical industry such as those from the American Society of Testing Materials (ASTM), Association of Official Analytical Chemists (AO AC), or from compendia such as the United States Pharmacopoeia (USP) or the Pood Chemical Codex (FCC) (36). The use of such methods eliminates the need for method vahdation. 

Scrap from municipal refuse may be in the form of source-separated steel cans, a mixed ferrous fraction, metal magnetically separated from mixed waste or incinerator ash, and C D debris. An ASTM specification (E1134-86) was developed in 1991 for source-separated steel cans. The Steel Recycling Institute has a descriptive steel can specification entitled "Steel Can Scrap Specifications". PubHshed standards for municipal ferrous scrap also include ASTM E701-80, which defines chemical and physical test methods, and ASTM E702-85 which covers the chemical and physical requirements of ferrous scrap for several scrap-consurning industries. 

Researchers had noted the release of formaldehyde by chemically treated fabric under prolonged hot, humid conditions (85,86). The American Association of Textile Chemists and Colorists (AATCC) Test Method 112 (87), or the sealed-jar test, developed in the United States and used extensively for 25 years, measures the formaldehyde release as a vapor from fabric stored over water in a sealed jar for 20 hours at 49°C. The method can also be carried out for 4 hours at 65°C. Results from this test have been used to eliminate less stable finishes. 

Tables 16 and 17 Hst tke analytical test methods for different properties of interest. The Manufacturing Chemists Association, Inc. (MCA) has pubUshed the Chemical Safety Data Sheet SD 63, which describes in detail procedures for safe handling of use of toluene (46). The Interstate Commerce Commission classifies toluene as a flammable Hquid. Accordingly, it must be packaged in authorized containers, and shipping must comply with ICC regulations. Properties related to safe handling are autoignition temperature, 536°C explosive limits, 1.27—7.0 vol % in air and flash point 4.4°C, closed cup.

Nutrients and diet supplements without claims of therapeutic effects are considered foods, and are thus regulated by the U.S. Food and Dmg Administration. These are further subject to specific food regulations. Specifications for pyridoxine hydrochloride (7) for foods are given in the Food Chemicals Codex (80) and for pharmaceuticals in the US. Pharmacopeia (81). General test methods have been summarized (82). 

Benzaldehyde is sold as technical grade or as meeting the specifications of the NationalVormulary (NF) (7), the Vood Chemicals Codex (FCC) (8), or the British Pharmacopeia (BP) (9) (Tables 4 and 5). The test methods used for the analysis of benzaldehyde are standard methods, with the exception of the assay method. 

Food and pharmaceutical grades of calcium carbonate are covered by the Food Chemicals Codex (7) and the United States Pharmacopeia (8) and subject to U.S. Food and Dmg Administration Good Manufacturing Practices (9). Both purity requirements and test methods are available (7,8). Calcium carbonate is listed in the U.S. Code of Federal Regulation as a food additive, and is authorized for use in both paper and plastic food contact appHcations. 

Caprolactam, Standard Test Methods Bulletin, AUied Chemical Corp., Morristown, N.J., June 1980. 

In addition to chemical analysis a number of physical and mechanical properties are employed to determine cemented carbide quaUty. Standard test methods employed by the iadustry for abrasive wear resistance, apparent grain size, apparent porosity, coercive force, compressive strength, density, fracture toughness, hardness, linear thermal expansion, magnetic permeabiUty, microstmcture, Poisson s ratio, transverse mpture strength, and Young s modulus are set forth by ASTM/ANSI and the ISO. 

Methods for Chemical Analysis of Graphite Test Method for Ash in a Graphite Sample Test Method for Moisture in a Graphite Sample... 

Standardized test methods for analyzing the chemical composition, viscosity, and physical properties of cellulose esters have been adopted by the ASTM and are described in substantial detail (110). 

Specifications and Standards Test Methods. Ethylcellulose is cleared foi many apphcations in food and food contact under the Eedeial Eood, Dmg, and Cosmetic Act, as amended. Examples include binder in dry vitamin preparations for animal feed, coatings and inks for paper and paperboard products used in food packaging, and closures with sealing gaskets for food containers (44). Methods of analyses ate given in ASTM D914-72 (19), NationalFonmila XIV, and Food Chemicals Codex II. 

Specifications and Standards Test Methods. Pood-grade HPC products are manufactured for use in food and conform to the specifications for HPC set forth in CPR 21, Section 172.870. Pood grades of HPC also conform to the specifications for HPC as Usted in the current edition of the Food Chemicals Codex. 

---