Polymer Surfaces characteristics

Pulp-like olefin fibers are produced by a high pressure spurting process developed by Hercules Inc. and Solvay, Inc. Polypropylene or polyethylene is dissolved in volatile solvents at high temperature and pressure. After the solution is released, the solvent is volatilised, and the polymer expands into a highly fluffed, pulp-like product. Additives are included to modify the surface characteristics of the pulp. Uses include felted fabrics, substitution in whole or in part for wood pulp in papermaking, and replacement of asbestos in reinforcing appHcations (56). 

SALI is a reladvely new surface technique that delivers a quantitative and sensitive measure of the chemical composition of solid surfaces. Its major advantage, compared to its parent technique SIMS, is that quantitative elemental and molecular informadon can be obtained. SPI offers exciting possibilities for the analytical characterization of the surfaces of polymers and biomaterials in which chemical differ-endation could be based solely on the characteristic SALE spectra. 

The hydrophilic surface characteristics and the chemical nature of the polymer backbone in Toyopearl HW resins are the same as for packings in TSK-GEL PW HPLC columns. Consequently, Toyopearl HW packings are ideal scaleup resins for analytical separation methods developed with TSK-GEL HPLC columns. Eigure 4.44 shows a protein mixture first analyzed on TSK-GEL G3000 SWxl and TSK-GEL G3000 PWxl columns, then purified with the same mobile-phase conditions in a preparative Toyopearl HW-55 column. The elution profile and resolution remained similar from the analytical separation on the TSK-GEL G3000 PWxl column to the process-scale Toyopearl column. Scaleup from TSK-GEL PW columns can be direct and more predictable with Toyopearl HW resins. 

When the polymer was prepared by the suspension polymerization technique, the product was crosslinked beads of unusually uniform size (see Fig. 16 for SEM picture of the beads) with hydrophobic surface characteristics. This shows that cardanyl acrylate/methacry-late can be used as comonomers-cum-cross-linking agents in vinyl polymerizations. This further gives rise to more opportunities to prepare polymer supports for synthesis particularly for experiments in solid-state peptide synthesis. Polymer supports based on activated acrylates have recently been reported to be useful in supported organic reactions, metal ion separation, etc. [198,199]. Copolymers are expected to give better performance and, hence, coplymers of CA and CM A with methyl methacrylate (MMA), styrene (St), and acrylonitrile (AN) were prepared and characterized [196,197]. 

When a polymer is soaked in a heavily oxidative chemical liquid, such as chromic anhydride-tetrachloroeth-ane, chromic acid-acetic acid, and chromic acid-sulfuric acid, and treated under suitable conditions, polar groups are introduced on the polymer surface and the surface characteristics are improved [49,50]. The sur-... 

The term "bioenertness" is a relative one since few if any synthetic polymers are totally biocompatible with living tissues. The terra is used here on the basis of preUminary in vitro and in vivo tests, together with chemical evaluations based on analogies with other well-tested systems. Two different types of polyphosphazenes are of interest as bioinert materials those with strongly hydrophobic surface characteristics and those with hydrophilic surfaces. These will be considered in turn. 

Depending on the application, polymers are transparent, opaque, glossy, or matte. Transparent applications range from automotive tail lights and food packaging, to camera and contact lenses. Opaque applications include buckets, kitchenware, and diaper backsheets. We can tailor the surface characteristics of a polymer by the production process to be either glossy or... 

We can define the principal electrical properties of polymers in terms of four characteristics electrical resistance, capacitive properties, dielectric strength, and arc resistance. We can change the surface characteristics of a polymer by subjecting it to a corona discharge generated by a strong electrical field. Lastly, we must also consider the influence of other physical properties on the application of polymers in electrical applications. 

Any fundamental study of the rheology of concentrated suspensions necessitates the use of simple systems of well-defined geometry and where the surface characteristics of the particles are well established. For that purpose well-characterized polymer particles of narrow size distribution are used in aqueous or non-aqueous systems. For interpretation of the rheological results, the inter-particle pair-potential must be well-defined and theories must be available for its calculation. The simplest system to consider is that where the pair potential may be represented by a hard sphere model. This, for example, is the case for polystyrene latex dispersions in organic solvents such as benzyl alcohol or cresol, whereby electrostatic interactions are well screened (1). Concentrated dispersions in non-polar media in which the particles are stabilized by a "built-in" stabilizer layer, may also be used, since the pair-potential can be represented by a hard-sphere interaction, where the hard sphere radius is given by the particles radius plus the adsorbed layer thickness. Systems of this type have been recently studied by Croucher and coworkers. (10,11) and Strivens (12). 

Apart from the whole range of physicochemical analyses of XeF2-treated polymers, some other potentially interesting and useful surface characteristics were tested and measured. 

The unique surface characteristics of polysiloxanes mean that they are extensively used as surfactants. Silicone surfactants have been thoroughly studied and described in numerous articles. For an extensive, in-depth discussion of this subject, a recent chapter by Hill,476 and his introductory chapter in the monograph he later edited,477 are excellent references. In the latter monograph, many aspects of silicone surfactants are described in 12 chapters. In the introduction, Hill discusses the chemistry of silicone surfactants, surface activity, aggregation behavior of silicone surfactants in various media, and their key applications in polyurethane foam manufacture, in textile and fiber industry, in personal care, and in paint and coating industries. All this information (with 200 cited references) provides a broad background for the discussion of more specific issues covered in other chapters. Thus, surfactants based on silicone polyether co-polymers are surveyed.478 Novel siloxane surfactant structures,479 surface activity and aggregation phenomena,480 silicone surfactants application in the formation of polyurethane foam,481 foam control and... 

In dentistry, silicones are primarily used as dental-impression materials where chemical- and bioinertness are critical, and, thus, thoroughly evaluated.546 The development of a method for the detection of antibodies to silicones has been reviewed,547 as the search for novel silicone biomaterials continues. Thus, aromatic polyamide-silicone resins have been reviewed as a new class of biomaterials.548 In a short review, the comparison of silicones with their major competitor in biomaterials, polyurethanes, has been conducted.549 But silicones are also used in the modification of polyurethanes and other polymers via co-polymerization, formation of IPNs, blending, or functionalization by grafting, affecting both bulk and surface characteristics of the materials, as discussed in the recent reviews.550-552 A number of papers deal specifically with surface modification of silicones for medical applications, as described in a recent reference.555 The role of silicones in biodegradable polyurethane co-polymers,554 and in other hydrolytically degradable co-polymers,555 was recently studied. 

In a recent review by Drake et al. 1 the surface activity of linear polymers and co-polymers is discussed, based on many recent references. They refer to the research correlating surface characteristics of siloxanes to the nature of end groups575 and to their concentration576 in linear polymers. A few examples of the recent work on siloxane migration to the interfaces, with the emphasis on the behavior of block577 and graft co-polymers,578 and their blends with... 

Incredibly, a review of Mark s publications also shows that he authored six papers on surface characteristics and dying, five on the X-ray structure of cellulose and polymers, four on X-ray diffraction (including one on the structures of CIi, and CBrij), and twelve review papers. In all Mark contributed to more than seventy papers. More impressive, he penned six books while at the University of Vienna. Two of his books, "Roentgenographic Untersuchung von Kristallen" coauthored by F. Halla (57) and "Hochpolymere Chemie"coauthored by K. H. Meyer (58), were particularly well received. A seventh book,... 

These data show the surface characteristics as related to ycr. In many cases, the surface of a solid may not behave as desired, and therefore it treated accordingly, which results in a change of the contact angle of fluids. For instance, the low surface energy of polymers (polyethylene [PE]) is found to change when treated with flame or corona (as shown in the following table). 

One can drastically alter the properties of polymers by suitable reactor design during forming of the polymer into its final shape. As examples, crystallinity, anisotropy, and surface characteristics can be tailored by ... 

---